SwanScout iPhone 15 Pro Portable Watch Charger 18A User Manual
- June 14, 2024
- SwanScout
Table of Contents
SwanScout iPhone 15 Pro Portable Watch Charger 18A
Product Overview
The SwanScout Portable Watch Charger is a compact and portable device designed for charging smartwatches. It features a USB-C input port and supports fast charging. The product is compatible with various models of smartwatches.
Product Specifications
- Capacity : 1800mAh
- USB-C Input: 1A
- Charging Watch Output : 25W
Product Instructions
- Before using this product, please read the user manual thoroughly and take good note of the instructions.
- To charge the product, connect the charging cable to the USB-C port of the device.
- The LED light on the product will indicate the current power level during charging.
- When all four LED indicators are continuously on, it means that the product is fully charged.
INSTRUCTIONS
Product Overview
Before using this product, please read this user manual thoroughly and take
good care of it.
Product Compatibility
For specific compatible models of smartwatches, please refer to the pictures
or text descriptions on the website
Specification
- Battery Capacity: 1800mAh 3.7V
- USB-C Input: 5V=1A
- Rated Capacity: 1100mAh
- Charging Watch Output: 2.5W
Product instructions
How to charge this product:
Place the charging cable connected to the power supply into the USB-C port to
charge this product. The indicator light indicating the current power level
flashes during charging; when the four power indicators are always on, it
means that the product is fully charged
How to charge smartwatch:
Place the smartwatch on the wireless charging area of this product, then
adjust the height to a suitable level using the height adjustment gear. Next,
press the power button to charge the smartwatch. Please check the charging
status of the smartwatch. Power button and power indicator description
Power button:
To turn on the product, click the power button once. To turn it off and halt
the output, double-click the power button. If the product is not in use for 50
seconds, it will turn itself off
Indicator light guide:
Remaining power display:
Press the power button to check the battery level.
Warning
- Do not disassemble or change the internal structure of this product by yourself to avoid danger
- Please usethis product in the temperature range of 0°C-40°C (32 °F-104 °F). Do not use this product in high-temperature and humid places to avoid equipment failure.
- Do not place metallic foreign, objects in the wireless charging area
- Do not throw this product into the fire otherwise may cause the equipment to catch fire or explode.
- This product contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, or crushed.
- Do not expose this product at high temperatures or around heat-generating devices such as heaters, microwave ovens, ovens, etc.
- Do not allow children or pets to swallow this product to avoid injury or other hazards.
- Radiowaves generated by this product may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and this product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using this product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device,
- Please comply with local regulations for the disposal of this product and its accessories, and support recycling operations.
FCC Statement
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by tuming the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference RSS-Gen
Issue 5 March 2019 This device contains licence-exempt transmitter
(s)/receiver (s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(S).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that maycause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
RF exposure statement:
The equipment complies with the IC Radiation exposure limit set forth for
uncontrolled environments. This equipment should be installed and operated
With a minimum distance of 20cm between the radiator and your body.
Follow us to get the latest news and activities:
For more product information, please visit:
www.swanscout.com
For customer support, please contact:
support@swanscout.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>