SwanScout S10020 Portable Charging Station User Manual
- June 16, 2024
- SwanScout
Table of Contents
SwanScout S10020 Portable Charging Station User Manual
Product Overview
Before using this prcxluct, please read this user manual thoroughly and take good r:are of it.
Product compatibility
Please consult the website’s images or text decryptions for delis on specific devices that are crn-npatible.
How to charge mobile devices
Place our mobile devices on the oorresi:x,nding wireless charging are., and they will start daring automatically.
How to charge a watch
Place your watch on the corresponding wireless charging area. The height adjustment pad will automatically adjust to the optimal charging position based on the watch’s weight and initiate charging. Please check your watch for the charging status.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Indicator light guide
Attention
- To achieve the fastest charging speed, plea”” use charging cables and adapters that are Compatible with QC 3.0/PD 3.0. Please be aware that using charging cables and adapters from unverified sources may potentially damage your device. We recommend using products that comply with quality and safety standards
- To ensure that the charging station works properly, the phone case should not exceed 5mm.
Specification
Input W-2A
Wireless charging output 15W(Max)
Watch output 2.SW (Max)
⚠ Warning
- Do not dissemble or chanop the internal structure of this product by yours to avoid danker
- Please use this product in the temperature range ofO”C-40’C (32 •F-104 •F). De not product in high temperature and humid place to avoid equipment failure.
- Do not paleo metallic foreign objects In the “‘1rele,ss charging are.
- Do ,not threw this product into the lira. other Más may cause the equipment to catdifira or
- This product ordains sensitive electronic components, including a battery. and ran be damaged. impair functionality. or cause injury if dropped. burned. punctured. crushed.
- Do nm expose the product to high temperature or around heat generating devices such as heaters, microwave ovens, ovens. etc
- Do not allow children or pets to swallow this product to avoid injury or miner hazards.
- Roil waves generated by this f'”Duct may interfere \MTh papermakers. defibrillators, or other medical devices. Maintain a safe distance of separation be!INeenyour medical device and this product Consul! :;our physician end medical d!Mce manufacturer for intonation specific to your medical derive Stop Lessing !hi< product if you suspect it i< interfering with your pacemaker, defibrillator, or any other medial dl!\lice.
- Please comply with loll regulators fur the disposal of this f'”Duct and its accessories. and support recycling operations.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning
Changes or modifications not e><prissily approve!!d by the party responsible
for compliance could void the uses authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to pr<Med reasonable protection against harmful interframe in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, maycsusa handful interference to radio communications.
HoW81181″. there is no guarantee that interferenoo will not occur in a
p;irticular installation. If this ~ailment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to corrac1 interference by
one or more of the following : (1) Reorient or relocate the receiving (2)
Increase the separation between ‘equipment and receiver. (3) Connect
‘equipment into an outlet on a circuit different from that to which IA is
connected. (4) Consult the dealer or an experienced radio/TV technician for
help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your
body.
Follow us to get the latest news and activities:
Facebook
x.com
Instagram
Pinterest
For more product information, please visit: www.swanscout.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>