SwanScout S10001 3 In 1 Fast Charging Station User Manual
- June 9, 2024
- SwanScout
Table of Contents
SwanScout S10001 3 In 1 Fast Charging Station
Product Information
This product is a digital device that complies with Part 15 of the FCC Rules. It has been designed to provide reasonable protection against harmful interference in a residential installation. The device generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
The device comes with antennas that must be installed to provide a separation distance of at least 20 cm from all persons. The antennas must not be co- located for operating in conjunction with any other antenna or transmitter.
Product Usage Instructions
- Read and understand the product manual before using the device.
- Do not make any changes or modifications to the device that are not expressly approved by the party responsible for compliance.
- Install and use the device in accordance with the instructions provided in the manual.
- If the device causes harmful interference to radio or television reception, try one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Ensure that the antennas provided with the device are installed at a distance of at least 20 cm from all persons and are not co-located for operating in conjunction with any other antenna or transmitter.
- Observe the FCC Radiation Exposure Statement and ensure that the device is operated with a separation distance of at least 20 cm from all persons.
Product Overview
Before using this product, please read this user manual thoroughly and take
good care of it. 
- Wireless charging area for smart watch
- Phone charging port
- Brightness touch adjustment
- Display screen
- Phone charging indicator
- Smart watch charging indicator
- 8 Earbuds Charging case charging indicator
- C, Earbuds charging case charging port
- Time setting”-” button
- Time setting”+” button
- Time setting button
Compatible
Please refer to the website’s images or text descriptions for information on specific compatible types of phones, earbuds charging cases, and watches.
Product instructions
Connect one end of the power adapter to the product’s Type-C input connector
and the other end to the power source.
Note: It may not be feasible to charge all three devices (the phone, the
earbuds charging case, and the watch) simultaneously if you don’t use the
power adapter that came with the package.
How to charge phone:
Plug the phone into the charging port to charge.
How to charge earbuds charging case:
Plug the earbuds charging case into the charging port to charge.
How to charge watch by watch wireless charger:
Place your watch in the watch wireless charging area to charge your watch.
Please check your watch for the charging status.
Time setting:
- short pres.s “Time setting button” to select 12/24 hour system.
- setting the hour: Long press the “Time setting button” for 3 seconds to enter setting mode, adjust time by pressing”+/-” button.
- setting the minutes: Long press ‘Time setting button” for 3 seconds, then short press “Time setting button” to enter setting mode, adjust time by pressing”+/-” button.
Note: After setting, wait for 5 seconds to exit setting mode.
Display screen adjustment:
To change the display screen’s brightness, click the brightness touch
adjustment icon. There are 4 levels of brightness for the display screen.
Level
|
First level
|
Second level
|
Third level
|
Fourth level
---|---|---|---|---
Display brightness|
Low
|
Medium
|
High
|
Off
Attention
- When not attached to a power source, this product’s built-in battery powers the time display. The time will revert to its factory setting when the power runs out, at which point you must reset it.
- This item contains a smart energy-saving feature. If there is no connection to the power supply, the time display will automatically go off after 10 minutes.
Indicator Light Guide
Charging
status
| ****
Plugged in
| ****
Standby
| ****
Charging
| Fully
Charged
| Foreign ObJect Detection
---|---|---|---|---|---
Indicator Light| ****
On for 3 Sec
| ****
OFF
| Green light| Green light| Red light
flashes
Specification
- Input: 9V/3A 12V/2.25A
- Charging phone output 20W (MAX)
- Charging watch output: 3.3W (MAX)
- Charging earbuds output 3W (MAX)
Important Reminder
- Please use a QC-compatible cable and adapter for optimum charging speed. Fast charging options include QC 2.0/3.0 or PD (Power Delivery).
- The correct operation of this charger is impeded by any phone case or earbuds case that is thicker than 5mm.
warning
- To avoid risk, never attempt to disassemble or alter the internal components of this device by yourself.
- Please use this product between the temperatures of 0°C and 40°C (32°F and 104°F). To prevent equipment failure, do not use this product in an environment with high temperatures and humidity.
- Do not place metallic foreign objects in the wireless charging area.
- Avoid throwing this product into a fire since doing so might cause the equipment to explode or catch fire.
- If dropped, burnt, pierced, or crushed, this device, which includes a battery, might be damaged, lose functioning, or inflict injury.
- Avoid exposing this product to high temperatures or placing it near appliances that produce heat, such as heaters, microwaves, and ovens.
- To prevent harm or other risks, do not let kids or pets ingest this product.
- This product’s radio waves may cause pacemakers, defibrillators, or other medical equipment to malfunction. Keep this product and your medical gadget separated by a safe distance. For information unique to your medical device, speak with your doctor and the manufacturer. If you believe this product is interfering with your pacemaker, defibrillator, or any other medical equipment, stop using it.
- Please support recycling efforts and follow local laws regarding the disposal of this device and its accessories.
FCC Warning Statement
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co‐located for operating in conjunction with any other antenna or transmitter.
RSS-Gen lssue 5 March 2019
This device contains licence-exempt transmitter (s)/receiver (s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following twO conditions:
- (1) This device may not cause interference.
- (2) This device must accept any interference, including interterence that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF exposure statement: The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated With minimum distance 20cm between the radiator and your body.
Scan for suggestions, customer support, manual, and all kinds of help:
Follow us to get the latest news and activities: 
For more product information, please visit:
www.swanscout.com
For customer support, please contact:
support@swanscout.com