COMMSCOPE MP-PP15M-15C-126 Monopole Sector Frame Installation Guide

REVISIONS

REV.| DESCRIPTION| DATE| APPROVED
C| CREATED INDIVIDUAL DRAWING| YMENG
05JUN24| CB1094
40197348CMO

1.0 GENERAL NOTES

1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com

2.0 DESIGN NOTES

2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
2.2 FITS MONOPOLES 15″-45″ O.D.
2.3 ANTENNA PIPES SHOULD BE CENTERED AND EVENLY SPACED.
2.4 POSITION MOUNT OR ADJUST SAFETY CLIMB CABLE SO NOT TO HINDER OR DAMAGE OR OBSTRUCT THE SAFETY CLIMB. SAFETY CABLE ROUTING BRACKET MAY BE PURCHASED SEPARATELY.

3.0 MANUFACTURING/SPECIAL REQUIREMENTS

3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT. ALL FASTENERS SHOULD BE TIGHTENED PER AISC 6.5.2.
SUGGEST PRE-ASSEMBLE MINI KICKER BRACKET TO RING MOUNT ON THE GROUND.

4.0 TEST

5.0 PACKAGING

5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED

© 2024 CommScope, Inc. Confidential

DENSITY

MASS

VOLUME

SURFACE AREA

| lbs/in³

3253.76         lbs

11866.11       in³

105234.53     in²

---|---
HEIGHT

LENGTH

WIDTH

|

COMMSCOPE, INC. OF NORTH CAROLINA

TOLERANCES

1 PLACE      .X[.X]  ±   0.2[6.3]

2 PLACE   .XX[.X]  ±  0.12[3.0]

3 PLACE .XXX[.X]  ±  0.060[1.5]

ANGLES                 ±  2°

|

SAP MATERIAL MASTER

MP-PP15M-15C-126

FINISH| MATERIAL
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES INTERPRET PER ANSI Y 14.5M-1994| | NAME|

DATE

| TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

CE| YMENG|

05JUN24

RW| YMENG|

06/06/2024

| |
AD| CB1094|

06/07/2024

|

SCALE

1:28

| DOCUMENT NO.

MP-PP15M-15C-126

RE| YMENG|

06/07/2024

ECN 40197348CMO

SIZE

| Auth Group

INSL

|

MODEL

|

DRAWING

| SHEET

1 OF 10

C

| |

VERSION

| STATUS| REVISION| VERSION| STATUS| REVISION
03| RE| D| 00| RE|

C

PART NUMBERS, WEIGHTS, & EPA

TABLE 1: CONFIGURATIONS

| | | | | |

INCLUDED PARTS

PART NUMBER

| DESCRIPTION| WEIGHT (LBS)| (EPA)A (FT^2)| (EPA)A 1/2″ ICE THICKNESS (FT^2)| ANTENNA PIPES| MC-RMHD-1245-3| MC-AS-SB03| RK-48-3MK| MPPP-HK01| MT546180| HRK-15-12-01| XP-2525-15|

MT-546-126

MP-PP15M-15C-126| MP,15′,3S,(15)2.88″X126″PIPE,W/HR|

3253.76

| 36.66| 48.93|

15

|

1

| 1| 1| 1| 3| 1| 2|

15

• (EPA)A DOES NOT INCLUDE ANTENNA PIPES AND MOUNTING HARDWARE. IF DESIRED, ADD ANTENNA PIPE PER TABLE 2

TABLE 2: EPA OF EACH ANTENNA PIPE

ANTENNA PIPE| (EPA)A (FT^2)|

(EPA)A W/ 1/2″ ICE THICKNESS (FT^2)

2-7/8″ X 126″|

2.42

|

3.26

NOTE:

1. ANTENNA PIPES ARE CONSIDERED SEPARATELY.
2. KA FACTOR OF 3-SECTOR EPA INCLUDED.
3. COMBINE THE ASSOCIATED EPA VALUES IN THE TABLES ABOVE TO DETERMINE THE EPA OF A MOUNT MODEL WITH A LISTED MOUNT PIPE CONFIGURATION.
   FOR EXAMPLE, MP-PP15M-15C-126 HAS A 3-SECTOR EPA OF 36.66 FT2 WITH NO ICE PLUS 15 ANTENNA PIPES WITH A 3-SECTOR EPA OF 15X2.42=36.30 FT2 WITH NO ICE.
   SO, THE TOTAL EPA OF 72.96 FT2 FOR THE MP-PP15M-15C-126

© 2024 CommScope, Inc. Confidential

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:48

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

2 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

FLATFORM FOR INSTALLATION

ADJUST THE INSTALLATION DISTANCE ACCORDING TO THE DIAMETER OF THE MONOPOLE WHEN INSTALL PLATFORM MC-AS-7000-00.
SEE TABLE 3 DETAIL FOR THE DISTANCE ADJUSTED.

DETAIL X
SCALE 1 : 6

1. INSTALLATION DISTANCE

TABLE 3: PLATFORM INSTALLATION POSITION

DIAMETER OF MONOPOLE
(INCH)| DISTANCE
(INCH)| DIAMETER OF MONOPOLE
(MM)|

DISTANCE
(MM)

15

| 25.40| 381.0| 645.2
17.5| 24.13| 444.5|

612.9

20

| 22.85| 508.0| 580.4
22.5| 21.58| 571.5|

548.1

25

| 20.30| 635.0| 515.6
27.5| 19.03| 698.5|

483.4

30

| 17.75| 762.0| 450.9
32.5| 16.48| 825.5|

418.6

35

| 15.21| 889.0| 386.3
37.5| 13.93| 952.5|

353.8

40

| 12.66| 1016.0| 321.6
42.5| 11.38| 1079.5|

289.1

45

| 10.11| 1143.0|

256.8

NOTE: FOR MONOPOLE DIAMETERS THAT ARE NOT IN THE TABLE, USE BELOW FORMULA TO GET THE VALUE OF THE ADJUSTMENT: DISTANCE OF ADJUSTMENT = 33.05- 0.51*D (INCH), WHERE D(INCH) IS THE DIAMETER OF MONOPOLE

© 2024 CommScope, Inc. Confidential

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:23

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

3 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

DETAIL A
SCALE 1 : 6

DETAIL F                     DETAIL G
SCALE 1 : 5                    SCALE 1 : 5

COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.

ITEM

| PART NO.| DESCRIPTION| QTY.| WEIGHT| NOTE NO.
---|---|---|---|---|---

1

| MC-RMHD-1245-3| 3 SECTOR RING MOUNT, 12″-45″ POLE|

1

|

329.19 LBS

|

2

| MC-AS-7000-00| WELDMENT,CO-LOCATION PLATFORM DECK|

3

|

208.07 LBS

|

3

| MC-AS-5000-00| WELDMENT, MONO PLATF SPINDLE|

3

|

107.22 LBS

|

4

| MC-AS-6100-00| WELDMENT, MINI KICKER BRACKET|

3

|

14.77 LBS

|

5

| RK48-00| MINI KICKER ARM SUPPORT TUBE 48″|

3

|

22.96 LBS

|

6

| GB-0550A| 5/8″ X 5″ GALV BOLT KIT (A325)|

6

|

0.52 LBS

|

7

| GWF-05| 5/8″ GALV FLAT WASHER, 1.7OD|

33

|

0.06 LBS

|

8

| GB-0524A| 5/8″ X 2-1/2″ GALV HEX BOLT (A325)|

27

|

0.31 LBS

|

9

| MC-AS-1200-00| CLAMP PLATE, CO-LOCATION PLATFORM|

6

|

2.97 LBS

|

10

| 9615-14| BOLT,CARRIAGE,5/8-11,8.5,STL GALV|

12

|

0.82 LBS

|

11

| GWL-05| 5/8″ GALV LOCK WASHER|

12

|

0.03 LBS

|

12

| GN-05| 5/8″ GALV HEX NUT|

12

|

0.08 LBS

|

13

| GB-05125| 5/8″ X 1-1/4″ GALV BOLT KIT|

3

|

0.20 LBS

|

14

| GUB-4355| 1/2″ X 3-5/8″ X 5″ GALV U-BOLT|

12

|

0.71 LBS

|

15

| MT546180| 2.875″ O.D. X 180″ PIPE|

6

|

87.21 LBS

|

16

| GUB-4352| 1/2″ X 3″ X 5-1/4″ GALV U-BOLT|

12

|

0.71 LBS

|

17

| MC-AS-6300-00| CORNER WELDMEMT, HANDRAIL|

3

|

31.87 LBS

|

18

| MC-AS-6400-00| WELDMENT, MINI KICKER CLIP|

3

|

5.97 LBS

|

19

| GB-0520A| 5/8″ X 2″ GALV BOLT KIT (A325)|

6

|

0.26 LBS

|

20

| XP-2525| CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD|

30

|

8.37 LBS

|

21

| MT-546-126| PIPE, 2.875″OD X 126″|

15

|

61.05 LBS

|

© 2024 CommScope, Inc. Confidential

SOME ITEMS OMITTED FOR CLARITY

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:20

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

4 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

DETAIL B                       DETAIL D
SCALE 1 : 6                     SCALE 1 : 6

DETAIL C                       DETAIL E
SCALE 1 : 5                     SCALE 1 : 4

SECTION H-H
SCALE 1 : 6

© 2024 CommScope, Inc. Confidential

SOME ITEMS OMITTED FOR CLARITY

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:20

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

5 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

ANTENNA SPACING SHOWN

15″ MONOPOLE

© 2024 CommScope, Inc. Confidential

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:25

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

6 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

25″ MONOPOLE

© 2024 CommScope, Inc. Confidential

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:25

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

7 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

35″ MONOPOLE

© 2024 CommScope, Inc. Confidential

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:25

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

8 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

45″ MONOPOLE

© 2024 CommScope, Inc. Confidential

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:25

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

9 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

OPTIONAL ACCESSORIES
(ALL THE ACCESSORY ITEMS TO BE PURCHASED SEPARATELY)

MP RRU SUPPORT KIT:
XP-PM-D
XP-PM-S
RR-FA2 OR RR-FA4

1. XP-PM-D MOUNTED VIEW

(HIDE ONE SIDE OF THE RRU FOR CLARITY)
DETAIL XP-PM-D MOUNTED VIEW
SCALE 1 : 10

1. FIT UP 2.375″ O.D. TO 3.50″ O.D. PIPE
2. RADIO SHOWN FOR REFERENCE
3. RR-FA2 OR RR-FA4
4. XP-PM-D

DETAIL XP-PM-S MOUNTED VIEW
SCALE 1 : 10

1. FIT UP 2.375″ O.D. TO 3.50″ O.D. PIPE

2. RADIO SHOWN FOR REFERENCE

3. RR-FA2 OR RR-FA4

4. XP-PM-S

5. RADIOS ROTATED 90 DEGREES

© 2024 CommScope, Inc. Confidential

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MP,15′,3S,(15)2.88″X126″PIPE,W/HR

SIZE

C

|

SCALE

1:25

| DOCUMENT NO.

MP-PP15M-15C-126

|

DRAWING

| SHEET

9 OF 10

VERSION| STATUS|

REVISION

00

| RE|

C

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>