EMEET C950 SmartCam HD Webcam User Guide

EMEET C950 SmartCam HD Webcam

Product Information

The HD Webcam eMeet C950 is a USB webcam designed for use with Windows and macOS devices. It comes with eMeetLinkc software for easy setup and use. The webcam is covered by a Two(2) Year Limited Warranty with EMEET, which covers damage caused by accidents or misuse. However, it does not cover normal wear and tear. The product is not recommended for use during water sports such as swimming or surfing, and it should not be submerged in water or exposed to damp environments for extended periods of time.

Product Usage Instructions

1. Connect the webcam to your PC using the USB cable provided.
2. Set up the webcam using the eMeetLinkc software.
3. Use the webcam with your preferred video conferencing or recording software.
4. When not using the webcam, unplug it from the USB port and turn off the power.
5. Protect the USB cable from damage by not stepping on it, applying pressure to it, or pulling on the plug, socket, or cable outlet.
6. Use only accessories specified by the vendor to ensure proper function.
7. If the product is damaged, do not attempt to repair it yourself. Contact professional maintenance personnel or send the product to the after-sales department for repair.

Safety Guide

To avoid electrical shock, do not open the housing of the product or use its internal parts. If repairs are needed, contact qualified maintenance personnel or send the product to the after-sales department. The product contains restricted substances such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and diphenyl ethers. These substances may exceed certain percentage content limits. Please refer to the equipment nameplate for more information.

Connect to PC

Setting up the webcam

eMeetLink Windows&macOS

• Image adjustment
• Firmware upgrade

www.emeet.com/emeetlink.

eMeetLink software can be downloaded from this website

Limited Warranty

EMEET Two(2) Year Limited Warranty
Limited Two(2) Year Warranty with EMEET proof of purchase. The warranty does not cover normal wear and tear or damage caused by accidents or misuse. To protect your rights, please keep the proof of purchase.

For service, please contact us:

• www.emeet.com

Safety Guide

Caution:
To avoid electrical shock, do not open the housing of this product. In addition, users do not need to use the product’s internal parts. To repair the product, please contact qualified maintenance personnel or mail the product to our after-sales department.

1. Please read this guide carefully.
2. Please keep this guide.
3. Please observe all warnings.
4. Please follow all instructions.
5. When cleaning this product, use a dry cloth only.
6. Choking hazard – This product contains small parts. It is not suitable for children under the age of 3.
7. Do not put this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeaker (including amplifiers) that produce heat.
8. Do not use this product if you must remain alert to your surroundings, for example, while driving a car or riding a bike.
9. Do not submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such as swimming or surfing.
10. Please protect the USB cable. Do not step on or apply pressure on them. Do not pull on the product’s plug, socket, or cable outlet.
11. It is recommended that users use the accessories that have been specified by the vendor.
12. When not using the webcam, please unplug the device from the USB port and turned off the power.
13. To repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, if the power cable or plug is damaged, liquid has flowed into the product, an object has fallen into the product; the product has come into contact with rain or moisture, the product cannot operate properly, or the product has fallen.

EU/UKCA Compliance

Hereby, SHENZHEN EMEET TECHNOLOGY CO., LTD. Corporation declares that the equipment is in compliance with <Directive 2014/30/EU /EMCR 2016 (S.I. 2016/1091)>.

1. The suitable temperature for the product and accessories is 0~40℃.
2. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. (from 15.19a)

NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.（from 15.21）

ISED Canada compliance:
This Class B digital apparatus complies with Canadian ICES-003.

UK REP:
Obelis UK Ltd, Sanford Gate, Oxford, OX4 6LB, UK

EC-REP:
Obelis S.A.

Copyright ©EMEET. The content of this manual is subject to change without notice.

www.emeet.com.

References

• EMEET | Collaboration For Creation
• EMEET | Collaboration For Creation
• EMEETLINK | EMEET Software Service and Downloads

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>