AZZA OVERDRIVE CSAZ-807 Computer Case User Manual

AZZA OVERDRIVE CSAZ-807 Computer Case

Model

Model Name:| OVERDRIVE
Name:| CSAZ-807

Specifications

Type:| ATX Tower
Color:| 1.5~2.0mm SPCC+ 2.5mm Aluminum
Top Panel:| Aluminum and tempered glass wing
Max CPU Cooler Height:| Up to 80mm
Max GPU Length:| Up to 400mm long Video card (Horizontal)
Max Cooling Tube Reservoir Length:| UP to 300mm
Power Supply:| ATX
Motherboard Compatibility:| < 305x280mm E-ATX, ATX, Micro ATX, Mini ITX

Expansion

External 5.25″ Drive Bays:| 0
Internal 2.5″ Drive Bays:| Up to 2
Internal 3.5″ Drive Bays:| Up to 2 (Convertible with 2.5″SSD x 2 )
Expansion slots:| 2
Front Ports:| 3xUSB 3.0, HD Audio, Type C, Metal power button

Physical Specifications

Metal Chassis Dimensions (HxWxD)| 440x570x590mm/17.3×22.4×23.2 inch
Weight:| 15kg /33.1lbs

Features

Outer Appearance:| All external panels are made of aluminum with two glass top panel, gull-wing panel design makes it easy to adjust and clean on usually.
Available Fan Ports:| Front: 1 x 200mm fan port (1x 200mm Addressable RGB fan included ) Top: 6 x 120mm/ 4 x 140mm fan ports
Sides: 6 x 120mm fan ports
Water Cooling:| Top: Supports radiators up to 280/360mm x 1 Sides: Supports radiators up to 360mm x 2
Isolated Chamber:| ATX Power supply inside its own isolated chamber, preventing its heat from affecting other components
Easy Installation Cooler:| A pre-cut hole for easy installation of CPU Cooler, eliminating the need to remove the motherboard
Accessories| Radiator bracket x 2 – Support 280/360mm on top two sides.
30cm PCI-E 3.0 extension cable for VGA card(Support EATX, ATX MB) AZZA Hub x1

Front I/O:
Reset / Led / HD Audio / USB3.0*3 / Type C

Graphics card rubber holder:
Before installing the graphics card, please stick the rubber holder.(Graphics card rubber holder in the tooling package)

Motherboard Installation

Disk Drive Mounts

Ports and Connectors

1. 7×3 pin ARGB ports (supports ARGB devices: ARGB fan, ARGB strips…etc)
2. 6×4 pin PWM fan ports
3. 1×2 pin connector to Reset (or LED) switch
4. 1xSATA power connector
5. 1×3 pin ARGB connector to MB
6. 1x4pin PWM fan connector to MB

Functions

1. Total of 17 lighting modes
2. Lighting modes can be controlled by Reset (or LED) switch, or can be controlled by MB.

(Hold the LED button for 3 seconds to switch the RGB control function between motherboard RGB software and LED button)

1. Magnet on the back of the hub box or using velcro on the back of the hub box, it can put in any place inside the metal part of the case.
2. 6 sets of ARGB port next to PWM port to ease the connection on fans

300 mm PCI-E 3.0 Cable(Support EATX, ATX Motherboard)

Documents / Resources

| AZZA OVERDRIVE CSAZ-807 Computer Case [pdf] User Manual
OVERDRIVE CSAZ-807, Computer Case
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>