VIZULO MRU Micro Martin LED Street Luminaire Instruction Manual

VIZULO MRU Micro Martin LED Street Luminaire

Specifications:

• Brand: VIZULO
• Model: Micro Martin LED street luminaire
• Voltage: 198 – 264 V AC
• Ingress Protection: IP66 (IEC)
• Impact Protection: IK08, IK09, IK10
• Weight: 3.7 kg – 3.8 kg

Product Usage Instructions

Mounting Instructions:
Follow the provided mounting instruction manual (Montzas instrukcija M) for proper installation. Ensure the luminaire is mounted securely.

Console Adjustment:
Use the provided instructions to adjust the console for optimal positioning of the luminaire.

LED Power and CCT:
The luminaire uses Oslon Square, Luxeon 5050, or LH205D LEDs with power ranging from 5W to 115W. Check the specific model for exact power specifications.

Luminaire Positioning:
Position the luminaire according to the provided mounting angle guidelines relative to the ground. Ensure proper positioning to avoid direct prolonged exposure to the light source.

Electrical Connection:
Connect the luminaire to the electrical grid following the wiring diagram provided. Use appropriate cables and connectors for a secure and safe connection.

FAQ:

• Q: What is the acceptable mounting angle for the luminaire?
  A: The acceptable mounting angle relative to the ground is 180 degrees. Ensure proper positioning to meet this requirement.

• Q: What is the IP rating of the luminaire?
  A: The luminaire has an IP66 rating, protecting against dust and water ingress.

FEATURES

Depends on configuration. Check label or technical specification.

Dimensions

Standard configuration

Configuration with adjustable console ±90°, 60 mm , 76 mm

Average Netto Weight

Console adjustment

WARNING!

• Do not touch LED modules!
• Do not put any tools or other items on LED modules!
• In case any LED is physically damaged (example shown below) the warranty is void.

The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than shown in the table above is not expected.

Acceptable luminaire with ZHAGA socket mounting angle relative to the ground

These limitations only apply when mounting the luminaire outdoors!

STANDARD CONFIGURATION

Mounting bracket adjustment

Configuration with terminal block

Watertight cable connector has to be ordered separately

ATTENTION! In case of NEMA Socket.
IP66 applies only for luminaire body and for connection between luminaire body and NEMA Socket, and do not applies to any mounted control device and connection between control device and NEMA Socket.

MCB/Inrush current table

Tridonic LED driver (No dim/ Midnight dimming/ DALI)

Standard/

High density

| In-rush current

(peak/dura  on)

| B10A| B13A| B16A| B20A| B25A| B32A| B40A| C10A| C13A| C16A| C20A| C25A| C32A| C40A
4-6 LED, 5-10W| 9 A (253 s)| 28| 36| 44| 51| 63| 81| 102| 46| 60| 3| 85| 106| 136| 1 0
6-12 LED, 11-26W| 15 A (226 s)| 19| 25| 30| 3| 46| 59| 4| 31| 41| 50| 61| 6| 9| 122
12-20 LED, 20-43W| 25 A (236 s)| 12| 16| 20| 26| 32| 41| 52| 20| 26| 33| 43| 53| 68| 86
20-28 LED, 30-64W| 32 A (335 µs)| 6| 8| 10| 13| 16| 20| 26| 10| 13| 16| 21| 26| 33| 42
28-32 LED, 45-95W| 42 A (238 µs)| 6| 8| 10| 13| 16| 20| 26| 10| 13| 1| 22| 2| 35| 44
32-32 LED,    -99W| 65 A (268 µs)| 3| 4| 5| 6| | 9| 12| 5| | 8| 10| 12| 16| 20
Eco| | B10A| B13A| B16A| B20A| B25A| B32A| B40A| C10A| C13A| C16A| C20A| C25A| C32A| C40A
4-4 LED, 5-11W| 9 A (253 s)| 28| 36| 44| 51| 63| 81| 102| 46| 60| 3| 85| 106| 136| 1 0
4-4 LED, 12-26W| 15 A (226 s)| 19| 25| 30| 3| 46| 59| 4| 31| 41| 50| 61| 6| 9| 122
4-8 LED, 20-43W| 25 A (236 s)| 12| 16| 20| 26| 32| 41| 52| 20| 26| 33| 43| 53| 68| 86
8-12 LED, 30-64W| 32 A (335 µs)| 6| 8| 10| 13| 16| 20| 26| 10| 13| 16| 21| 26| 33| 42
12-16 LED, 45-95W| 42 A (238 µs)| 6| 8| 10| 13| 16| 20| 26| 10| 13| 1| 22| 2| 35| 44
16-32 LED,    -115W| 65 A (268 µs)| 3| 4| 5| 6| | 9| 12| 5| | 8| 10| 12| 16| 20
Tridonic LED driver (Zhaga)
Standard/

High density

| In-rush current

(peak/dura  on)

| B10A| B13A| B16A| B20A| B25A| B32A| B40A| C10A| C13A| C16A| C20A| C25A| C32A| C40A
4-6 LED, 5-11W| 8 A (4 0 s)| 19| 25| 30| 38| 4| 60| 6| 31| 41| 50| 63| 8| 100| 126
6-12 LED, 12-26W| 15 A (316 s)| 16| 21| 25| 33| 41| 52| 66| 26| 35| 41| 55| 68| 88| 110
12-20 LED, 20-43W| 20 A (346 s)| 11| 14| 1| 22| 2| 35| 44| 18| 23| 28| 36| 45| 5| **
20-32 LED, 44-76W| 38 A (280 µs)| 6| 8| 10| 13| 16| 20| 26| 10| 13| 16| 21| 26| 33| 42
Eco| | B10A| B13A| B16A| B20A| B25A| B32A| B40A| C10A| C13A| C16A| C20A| C25A| C32A| C40A
4-4 LED, 5-11W| 8 A (4 0 s)| 19| 25| 30| 38| 4| 60| 6| 31| 41| 50| 63| 8| 100| 126
4-4 LED, 12-26W| 15 A (316 s)| 16| 21| 25| 33| 41| 52| 66| 26| 35| 41| 55| 68| 88| 110
4-8 LED, 20-43W| 20 A (346 s)| 11| 14| 1| 22| 2| 35| 44| 18| 23| 28| 36| 45| 5| **
8-12 LED, 30-65W| 28 A (2 0 µs)| 10| 13| 16| 20| 25| 32| 40| 16| 21| 26| 33| 41| 52| 66
16-32 LED, 45-95 W| 38 A (280 µs)| 6| 8| 10| 13| 16| 20| 26| 10| 13| 16| 21| 26| 33| 42

Energy efficiency class of contained light source(s)

Terms of use and maintenance

Before luminaire is turned on, it should be mounted according with this mounting instruction or any other applicable regulations.

Mounting instructions

Mounting of luminaire must be performed by a qualified person according with following instructions:

• The warranty of luminaire does not apply, if the mounting of luminaire has been performed in precipitation (rain, snow, hail).
• The warranty of luminaire does not apply, if a control system unauthorized by VIZULO or an inapplicable LED driver has been used to drive the luminaire.
• The warranty of luminaire does not apply, if it has been used in an unsuitable ambient temperature or has been supplied by voltage outside of the specified range.
• The warranty of luminaire does not apply, if the LED driver program has been changed in any way.
• The warranty of the luminaire does not apply, if the logged history data of the LED driver has been deleted without the permission of VIZULO.
• The warranty of luminaire does not apply, if it has been mounted in unspecified angles or upside down (luminaire glass directed up), or it has been completely submerged under water.

Safety instructions

Any actions with the luminaire must be performed by a qualified person, who is certified according with national regulations and requirements.
To prevent any accidents person installing the luminaire must follow national safety requirements and following instructions:

• The label containing technical parameters of the luminaire has to be studied before the work on it has begun.
• Any luminaire build or design changes are prohibited.
• The luminaire must be used in good technical condition and according with this instruction.
• Only VIZULO authorized spare parts and accessories can be used to repair the luminaire.
• The repair of luminaire has to be performed by a qualified and certified person.

Maintenance and repair
Luminaire has to be disconnected from electrical grid before it is opened and/or repaired!

• The person working with the luminaire must follow national regulations and legislations that apply to maintenance and testing of electrical or electronic appliances.
• The luminaire may need to be cleaned depending on its environment. Only a damp cloth or a sponge may be used to clean the luminaire. Use only household detergents diluted by water.
• Only VIZULO authorized spare parts may be used for the luminaire.
• Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
• LED modules, lens and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoor to avoid water entering the luminaire.
• Spare parts (lens, LED modules and drivers) should be ordered from the information available on the luminaire label.

References

• Vizulo

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>