Ampeg LIQUIFIER Analog Chorus Pedal User Guide
- August 24, 2024
- ampeg
Table of Contents
Ampeg LIQUIFIER Analog Chorus Pedal
Product Information
Specifications
- Signal-to-Noise Ratio (Effect Level @ 12:00): 82 dB
- Maximum Gain: +0 dB (Unity)
- Power Requirements:
- Internal: 9V Battery
- External: 9V DC, 60mA
- Size (H x W x D): 2.2 x 2.6 x 4.5 in / 56 x 66 x 114 mm
- Weight: 0.6 lb / 0.3 kg
Product Usage Instructions
- Read and understand the included Important Safety Instructions.
- Make all initial connections with the power switches OFF on all equipment. Ensure Master Volume, Level, and Gain controls are all the way down.
- Insert a 9V battery or connect the optional AC/DC power supply following voltage specifications on the rear panel.
- Connect an instrument to the Input jack using a 1/4 (shielded) instrument cable.
- While playing the instrument, adjust the Rate, Depth, and Effect Level knobs to your preference.
- Input: Connect a passive or active instrument to this Input jack.
- Output: Sends the signal to an external power amplifier, mixer, or recording setup.
- On/Off Switch: Turns the pedal on/off. LED indicates on/off status.
- Rate: Adjusts the speed of the low-frequency oscillator (LFO).
- Depth: Adjusts the amplitude/intensity of the rate.
- Effect Level: Adjusts the overall effect level.
- Rate Indication LED: Flashes to indicate the current rate.
- Power: Input socket for optional AC/DC power supply.
- Battery (not included): Provides 9V of power (accessible by removing the four screws on the bottom panel).
FAQ
- Warranty and Support
- For warranty coverage, owner’s manual, product registration, or technical support, visit www.ampeg.com or call 818-575-3600.
What’s in the Box
- Liquifier Analog Chorus Pedal, Quick Start Guide.
Hookup Diagrams
- Standard Setup
PA/Recording Setup
Front Rear Side and Bottom Panel Descriptions
- Input: Connect a passive or active instrument to this Input jack.
- Output: Feeds the signal to an external power amplifier, mixer, or recording setup.
- On/Off Switch: Turns the pedal on/off. The LED indicates the on/off status.
- Rate: Adjusts the speed of the low-frequency oscillator (LFO).
- Depth: Adjusts the amplitude/intensity of the rate.
- Effect Level: Adjusts the overall effect level.
- Rate Indication LED: This LED flashes to indicate the current rate.
- Power: Input socket for optional AC/DC power supply.
- Battery (not included): Provides 9V of power (accessible by removing the four screws on the bottom panel).
Getting Started
- Read and understand the included “Important Safety Instructions.”
- Make all initial connections with the power switches OFF on all equipment. Make sure the Master Volume, Level and Gain controls are down.
- Insert a 9V battery or connect an optional AC/DC power supply. The Liquifier Analog Chorus may accept the appropriate voltage as indicated on the rear panel.
- Connect an instrument to the Input jack with a 1/4″ (shielded) instrument cable.
- While playing the instrument, adjust the Rate, Depth, and Effect Level knobs to taste.
Technical Specifications
- Signal-to-Noise Ratio (Effect Level @ 12:00): 82 dB
- Maximum Gain: +0 dB (Unity)
- Power Requirements Internal: 9V Battery External: 9V DC, ≥60mA
- Size (H x W x D): 2.2 x 2.6 x 4.5 in 56 x 66 x 114 mm
- Weight: 0.6 lb / 0.3 kg
All specifications subject to change
WARRANTY AND SUPPORT
- Visit WWW.AMPEG.COM to…
- Identify warranty coverage provided in your local market. Please keep your sales receipt in a safe place.
- retrieve a full-version, printable OWNER’S MANUAL (English only) for your product.
- REGISTER your product.
- CONTACT Technical Support, or call 818-575-3600.
CONTACT
- www.ampeg.com
- Yamaha Guitar Group, Inc.
- 26580 Agoura Road, Calabasas, CA 91302-1921 USA
- Part No. 40-00-0528 Rev. A
- https://www.facebook.com/AmpegUSA?ref=ts
- https://twitter.com/Ampeg
- http://www.youtube.com/user/ampegtv
- https://www.instagram.com/ampeg/
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg and the Ampeg logo are trademarks or registered trademarks of Yamaha
Guitar Group, Inc. in the U.S. and/or other jurisdictions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>