nVent A927F201 Hex Head Bolt Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent A927F201 Hex Head Bolt
Product Usage Instructions
Installation:
- Ensure you have the correct tools for installation.
- Clean the surface where the bolt will be installed.
- Align the bolt with the threaded hole and begin screwing it in using a suitable wrench.
- Tighten the bolt securely but avoid over-tightening to prevent damage.
Maintenance
- Regularly check the bolt for any signs of loosening or corrosion. If any issues are found, replace the bolt immediately.
Removal
- Use the appropriate tools to unscrew the bolt carefully.
- Inspect the surrounding area for any damage caused by the removal process.
Storage
- Store the bolt in a dry place away from moisture to prevent rusting.
Safety Precautions
- Always wear appropriate safety gear when handling or installing the bolt to prevent injuries.
FAQ
- Q: Can this bolt be used in outdoor applications?
- A: Yes, the stainless steel material makes it suitable for outdoor use as it is resistant to corrosion.
- Q: What is the maximum load capacity of this bolt?
- A: The load capacity may vary based on installation conditions, but it is recommended to follow engineering guidelines for load calculations.
Product Information
CATALOG NUMBER
- A927F201
FEATURES
- Imperial-threaded hex head bolt
PRODUCT ATTRIBUTES
- Material: Stainless Steel 18-8 (EN 1.4305)
- Thread Size: 1/2″ UNC
- Screw Length: 1 1/2″
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death and/or void your warranty.
Contacts
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
Our Brands
Our powerful portfolio of brands
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>