Dusun DSGW-095 Smart Gateway Owner’s Manual

A Dusun Company
Product Name: Smart Gateway
Product Model: DSGW-095
Hangzhou Roombanker Technology Co., Ltd

Product Specification

Revision History

Approvals

Model List

Feature Model| Wi-Fi| Ethernet| Bluetooth| Zigbee| Z-Wave| LTE Cat1| LTE Cat M1
---|---|---|---|---|---|---|---
DSGW-095-1| •| •| •| •| •| •|
DSGW-095-2| •| •| •| •| | |

Product Description

1.1. Purpose and Description
The DSGW-095 is a Ceiling-Mounted Gateway utilized in smart home systems, the intelligent security industry, and pension service applications. Serving as a central Gateway, it supports various wireless protocols, including Wi-Fi, LTE, Zigbee 3.0, and BLE 5.2. This allows users to connect to the network through Wi-Fi, Ethernet, or cellular networks. Additionally, it facilitates the integration of smart sensors by supporting their connection via its multi- protocol features.

1.2. Product Feature Summary

• OS: Debian 11
• USB 5V type-C and PoE power supply
• Processor: RK3328 Quad-core Cortex A53
• RAM: Up to 2GB
• eMMC: Up to 16GB
• Support IEEE802.11ac, IEEE802.11n, IEEE802.11g, IEEE 802.11b Protocol
• Support 4G LTE CATM1, CAT1
• Support Bluetooth 5.2, Zigbee3.0, Z-Wave, Wi-Fi 2.4/5G
• One WAN/LAN variable network port

1.3. Hardware Block Diagram

Mechanical Requirement

2.1. Drawings

2.2. Interface

2.3. Dimensions

Specification

3.1. Technical Specification

settings, press and hold it for more than 10 seconds
Network Interface| 1 WAN/ LAN 10/100 Mbps variable port
SIM| SIM Card Slot x 2
TF| 1 TF slot
WIFI| 2.4/5G (BL-M8821)
LTE| CAT1 (EG91) /CAT M1 (BG96)
Wireless| Bluetooth 5.2 (EFR32BG21) Zigbee3.0 (EFR32MG21) Z-Wave (ZGM130S)
Indicator LEDs| 1) Power(yellow): The yellow light stays on, that is the gateway is switched on. The
2) yellow light is off, that is the gateway is switched off
3) Network(yellow): It stays on after connecting to WIFI or LTE, otherwise it goes off
4) Wireless(yellow): It stays on long after connecting to Zigbee or Z-Wave, otherwise it goes off
RTC| Reserve
Antenna| FPC Antenna
Installation method| Flat Ceiling
Operating Temperature| -10°C-55°C
Storage Temperature| -20°C-65°C
Operating humidity| 10%-90%
IP rating| IP22

Performance Requirement

Wi-Fi Performance|  IEEE Wireless LAN standard: IEEE802.11ac, IEEE802.11n, IEEE802.11g, IEEE802.11b
 Data Rate:
IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps
IEEE 802.11n: MCS0~MCS7 @ HT20/ 2.4GHz band
MCS0~MCS7 @ HT40/ 2.4GHz band
MCS0~MCS9 @ HT40/ 5GHz band
IEEE 802.11ac: MCS0~MCS9 @ VHT80/ 5GHz band
 Sensitivity:
VHT80 MCS9: -60dBm@10% PER(MCS9) /5GHz band
HT40 MCS9: -63dBm@10% PER(MCS9) /5GHz band
HT40 MCS7: -70dBm@10% PER(MCS7) /2.4GHz band
HT20 MCS7 : -71dBm@10% PER(MCS7) /2.4GHz band
 Transmit Power:
IEEE 802.11ac: 13dBm @HT80 MCS9 /5GHz band
IEEE 802.11ac: 16dBm @HT80 MCS0 /5GHz band
IEEE 802.11n: 14dBm @HT20/40 MCS7 /5GHz band
IEEE 802.11n: 16dBm @HT20/40 MCS0 /5GHz band
IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHzband
IEEE 802.11g: 16dBm @54MHz
IEEE 802.11b: 18dBm @11MHz
 Wireless Security: WPA/WPA2, WEP, TKIP, and AES
 Working mode: Bridge, AP Client
 Range: 50 meters maximum, open field
 Transmit Power:17dBm
 Highest Transmission Rate: 300Mbps
 Frequency offset: +/- 50KHZ
 Frequency Range (MHz): 2412.0~2483.5
 Low Frequency (MHz):2400
 High Frequency (MHz):2483.5
 E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
 Bandwidth (MHz):20MHz/40MHz
 Modulation: BPSK/QPSK, FHSSCCK/DSSS, 64QAM/OFDM
---|---
Bluetooth Performance|  TX Power: 19.5±1.5dBm
 Range: 120 meters minimum, open filed
 Receiving Sensibility: -92dBm@0.1%BER 1Mbps
 Frequency offset: +/-30KHZ
 Frequency Range (MHz):2405~2480
 Low Frequency (MHz):2400
 High Frequency (MHz):2483.5
 E.i.r.p (Equivalent Isotopically Radiated power)(mW)<100mW
 Bandwidth (MHz):2MHz
 Modulation: GFSK
Zigbee Performance|  TX Power: 17.5dBm
 Range: 100 meters maximum, open filed
 Receiving Sensibility: -94dBm
 Frequency offset: +/-20KHZ
 Frequency Range (MHz):2400.0~2483.5
 Low Frequency (MHz):2400
 High Frequency (MHz):2483.5
 E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
 Bandwidth (MHz):5MHz
 Modulation: OQPSK
Z-Wave Performance|  TX power up to13dBm(20mW)
 RX sensitivity: @100kbps-97.5dBm
 Range: 100 meters maximum, open filed
 Default Frequency: 916MHz(Different country with different frequency)
LTE Cat1|  LTE FDD: B2/B4/B5/B12/B13
 WCDMA:B2/B4/B5
 LTE FDD Data rate:10(DL)/5(DL)
LTE Cat M1| Operation Frequency Band: 850/900/1800/1900MHZ
 Global:LTE:FDD:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
 North America: LTETDD:B2/B4/B12/B13
 LTE TDD:B39(for cat.M1only)
WAN/LAN| 10/100M bps

QA Requirements

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference.
   (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user’s body and the device including the antenna.

Floor 8 | Building A Wan Tong Center
HangZhou 310004 | China
Tel: +86 -571 -86769027/88810480
Website: www.dusuniot.com
www.dusunremotes.com
www.hzdusun.com

References

• Dusun IoT: Embedded Hardware Vendor/Manufacturer | IoT Gateway Expert
• 东胜物联_智能网关_物联网网关设备 - 东胜物联

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>