DUSUN DSGW-010 Waterproof Industrial Gateway User Manual
- June 9, 2024
- Dusun
Table of Contents
DSGW-010 Waterproof Industrial Gateway
User Manual
Product Specification
Product Name: Waterproof Industrial Gateway
Model Name: DSGW-010
DSGW-010 Waterproof Industrial Gateway
Revision History
Specification | Sect. | Update Description | By |
---|---|---|---|
Rev | Date | ||
Li |
Approvals
Organization | Name | Title | Date |
---|---|---|---|
Introduction
1.1 Purpose & Description
It’s a Bluetooth Gateway with POE or DC power supply. It can be used in
various scenarios flexibly. It can control BLE device remotely, receives the
data sent by the BLE devices and sends it to servers. The Wi-Fi data rate can
be up to 580Mbps and the BLE data rate can be up to 2Mbps. It can also support
the POE switch power supply and 12V adapter power supply, It reserves the
ZigBee function and 4G LTE function.
1.2 Product Feature Summary
- Support the POE switch power supply and 12V adapter power supply
- Support IEEE802.3-2012 Type 1, the IEEE802.3-2012 Type 1 requires a power supply device (PSE) to provide 44 to 57V, and the power of the powered device(PD) must not exceed 12.95 W and the current does not exceed 350 mA Support IEEE802.11n,IEEE802.11g,IEEE 802.11b Protocol
- Support Network Communication of 4G Module (LTE-TDD/LTE-FDD)
- Support Bluetooth 5.2
- Support ZigBee3.0 ;
- Supporting waterproof IP66
- One WAN/LAN variable network port
- RoHS compliance(Lead-free)
- FCC,CE compliance
Mechanical Requirement
2.1 Interface
- LED indicator
- RJ45Interface(Network Interface and POE Power Supply Interface)
- DC power
- WIFI Antenna
- LTE Antenna
- BT Antenna, ZigBee Antenna, Z-wave Antenna,
2.2 Dimension
Electrical Requirements
3.1 Hardware Information
Category | Specifications |
---|---|
Power Supply Port | Support DC input, input Voltage range is 10V to12V. The |
power seat aperture is 3.5mm. The needle diameter is1.35 mm and is positive.
Power adapter:100-240V 50/60HZ,Output is 12V/2A
Reset button| The reset button inside the gateway, After pressing the reset
button for more than 5 seconds, the Wi-Fi unit will be restored to the factory
settings.
Network Interface| The network interface supports CAT-5/CAT-5E to transmit
data and POE Power Supply (voltage range is 44~ 57V). It is a WAN/LAN
variable.
Indicator LEDs| 1). Power LED normally on when powered on 2). Network LED
normally on when connected 3). Wi-Fi LED normally on after connecting to Wi-Fi
for 1- 2 sec
---|---
Operating Temperature| -20℃~70℃
Currents| 1000mA@12V
waterproof level| IP66
3.2 Performance Requirement
3.2.1 Wi-Fi Performance
IEEE wireless LAN standard:IEEE802.11n; IEEE802.11g; IEEE 802.11b
Data Rate: IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps
IEEE 802.11n: MCS0~MCS7 @ HT20/ 2.4GHz band
MCS0~MCS7 @ HT40/ 2.4GHz band
Sensitivity:HT40 MCS7 : -70dBm@10% PER(MCS7) /2.4GHz band
HT20 MCS7 : -71dBm@10% PER(MCS7) /2.4GHz band
Transmit Power: IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band
IEEE 802.11g: 16dBm @54MHz
IEEE 802.11b: 18dBm @11MHz
Wireless Security: WPA/WPA2, WEP, TKIP, and AES
Working mode: Bridge Gateway AP Client
3.2.2 ZigBee Performance
TX Power: 17.5dBm
Range: 100 meters minimum, open filed
Receiving Sensibility:-94dBm
Frequency offset: +/-20KHZ
3.2.3 Bluetooth Performance
Bluetooth Protocol: Bluetooth 5.2
TX Power: 19.5dBm
Range: 150 meters minimum, open filed
Receiving Sensibility: -80dBm@0.1%BER
Frequency offset: +/-20KHZ
3.2.4 LTE Performance
Operation Frequency Band: 850/900/1800/1900MHZ
GPRS Characteristic
GPRS
| Global: LTE FDD:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
North America: LTE TDD:B2/B4/B12/B13
---|---
LTE TDD:B39(for cat.M1 only)
EGPRS
Cat.M1/Cat.NB1
3.2.5 Ethernet Performance
WAN port: 10M/100M bps
LAN port: 10M/100M bps
QA Requirements
4.1 Quality Information
Quality &Testing Information
Information Description| Standard(Yes) custom(No)
ESD Testing| Yes
RF Antenna Analysis| Yes
Environmental Testing| Yes
Reliability Testing| Yes
Bluetooth Certification| Yes
ZigBee Certification| Yes
Waterproof test| Yes
4.2 Operate temperature
For gateway, the Standard temperature operates is at -20℃~70℃.
Application
- Bluetooth Gateway collects information about Beacon nearby, including RSSI, MAC, etc., once per second.
- Bluetooth Gateway sends the Beacon information to Cloud via Wi-Fi or LTE once per second.
- Bluetooth Gateway supports the TCP/IP, UDP protocol, and can support the MQTT, LWM2M protocol
5.1 AP-01 Monitor Shopping and Street Activity
The smart gateway can be used to detect iPhone and Android devices, which can
be detected without the need of being connected to a specific Access Point,
enabling the detection of any smartphone, laptop, or handsfree device which
comes into the coverage area of this smart gateway and in general any device
which works with Wi-Fi or Bluetooth interfaces. Users have to do nothing to
be detected as the WIFI and Bluetooth radios are integrated into their
smartphones.
DB ID | Timestamp | MAC | AP | RSSI | Vendor |
---|---|---|---|---|---|
53483 | 4/24/2012 7:56 | C4:2C:03:96:0E:4A | 69 | Apple | |
53482 | 012-04-24 09:11:26 | D8:2A:7E:10:1E:63 | libelium_wsn1 | 60 | Nokia |
Corporation
DB ID| Time stamp| MAC| ID| RSSI| Coda| Vendor
---|---|---|---|---|---|---
45400| 2012-05-16 16:18:12| 00:26:7E:5F:3C:18| my Car| -72| Handsfree| PARROT
SA
78905| 2012-04-20 12:59:27| D8:2A:7E:OE:C3:10| Tropic| -85| Smart phone| Nokia
Corporation
Example of information monitored by the Bluetooth Scanner
5.2 AP-02 Beacons for Indoor guidance and location
Exemplary deployment of a beacon
infrastructure
The beacon attached to the asset to be tracked sends BLE signals to Smart
Gateway that are installed in the building. The Gateway processes the provided
data and sends it via Wi-Fi, Ethernet to Server. Here, the position is
displayed on a map, and motion statistics can be retrieved.
5.3 AP-03 Locate the ship
The smart gateway can be used as a transmitter to connect various
communication equipment on the ship and transmit signals to the monitoring
center by the LTE. At the same time, the gateway can be connected to the
camera or voice device, and the image can be encoded and transmitted back to
the ground satellite fixed station through a variety of communication means.
As a router, it is convenient for the crew to connect computers, mobile
phones, etc., and access the Internet through the ground satellite master
station to realize network surfing
5.4 AP-04 Intelligent gateway Construction site management system
As the central control gateway of the construction site, the
monitoring information of various sensors in the construction site can be
collected through Bluetooth, ZigBee, and Ethernet to realize real-time remote
monitoring of the construction site. At the same time for the site of
computers, printers to provide network access, convenient supervisor office.
Installation
Packing List
Gateway | 1 |
---|---|
adapter | 1 |
network cable | 1 |
Clamping Fixture | 1 |
antenna | 1 |
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To comply with RF exposure requirements, a minimum separation distance of 20
cm must be maintained between the users body and the device, including the
antenna.
Floor 8, building A, Wanting center,
Hangzhou 310004, china
Tel:86-571-86769027/8 8810480
Website: www.dusuniot.com
www.dusunremotes.com
www.dusunlock.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>