LeapFrog 80-600360 Stack and Tumble Elephant User Guide

: August 22, 2024
: LeapFrog

Table of Contents

LeapFrog 80-600360 Stack and Tumble Elephant
INTRODUCTION
GETTING STARTED
PRODUCT FEATURES
ACTIVITIES
CARE & MAINTENANCE
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LeapFrog 80-600360 Stack and Tumble Elephant

INTRODUCTION

The Stack & Tumble ElephantTM provides a silly twist on the classic ring stacker. Each colorful, textured ring placed on the elephant’s trunk introduces your child to numbers, shapes and colors. When all five rings are stacked on the trunk, press his tail to make him sneeze and off go the rings! Press the tip of his trunk to hear songs about numbers, shapes and colors. For fine motor play, twist the ears for clicking sounds.

INCLUDED IN THIS PACKAGE

One Stack & Tumble ElephantTM
Parent’s guide
Five rings

WARNING: All packing materials, such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please keep this parent’s guide as it contains important information.

Unlock the packaging locks:

Rotate the packaging locks 90 degrees counter-clockwise.
Pull out the packaging locks and discard.

GETTING STARTED

BATTERY INSTALLATION

Make sure the unit is turned OFF.
Locate the battery cover on the bottom of the unit.
Use a screwdriver to loosen the screw and open the battery cover.
Install 2 new AA (AM-3/LR6) batteries into the battery box as illustrated. (The use of new alkaline batteries is recommended for maximum performance.)
Replace the battery cover and tighten the screw to secure.

BATTERY NOTICE

Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if removable).
Rechargeable batteries are only to be charged under adult supervision.

PRODUCT FEATURES

On/Off/Volume Control Switch
Slide the On/Off/Volume Control Switch to turn the toy on and select the volume.
Light-Up Button
Press the Light-Up Button at the end of the elephant’s trunk for learning songs.
Colorful Textured Rings
Put the five Colorful Textured Rings on the elephant’s trunk to hear him talk.
Textured Ears
Twist the Textured Ears for fun clicking sounds.
Tail Lever
Press the elephant’s Tail Lever to make him lower his trunk and sneeze off the rings.

ACTIVITIES

Stacking Fun
Stack all five Colorful Textured Rings on the elephant’s trunk for a special surprise.
Off Go the Rings!
Press the elephant’s Tail Lever to make him lower his trunk and sneeze, releasing the rings.
Learning Songs
Press the Light-Up Button on the tip of the elephant’s trunk for learning songs about shapes, numbers and colors.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries when the unit is not in use for an extended period of time.
Do not drop the unit on a hard surface and do not expose the unit to excess moisture.

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these steps:

Turn the unit OFF.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit back ON. The unit will now be ready to play again.
If the unit still does not work, replace it with an entire set of new batteries.

Environmental phenomena.

The unit may malfunction if subjected to radio-frequency interference.
It should revert to normal operation when the interference stops.
If not, it may become necessary to turn the power OFF and back ON or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

IMPORTANT NOTE

If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. or email support@leapfrog.com. Creating and developing LeapFrog® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-3 (B)/NMB-3(B)

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Visit our website for more information about our products, downloads, resources, and more. leapfrog.com For warranty information, please visit leapfrog.com/warranty.

FREQUENTLY ASKED QUESTIONS

What is the LeapFrog 80-600360 Stack and Tumble Elephant?

The LeapFrog 80-600360 Stack and Tumble Elephant is an interactive toy designed to help young children develop motor skills and hand-eye coordination through stacking and tumbling play.

What are the dimensions of the LeapFrog 80-600360 Stack and Tumble Elephant?

The Stack and Tumble Elephant measures 4.8 x 6.85 x 8.34 inches, making it a compact and manageable size for toddlers to interact with.

How much does the LeapFrog 80-600360 Stack and Tumble Elephant weigh?

The toy weighs approximately 1.1 pounds, which is light enough for young children to handle easily.

What is the recommended age range for the LeapFrog 80-600360 Stack and Tumble Elephant?

The LeapFrog 80-600360 Stack and Tumble Elephant is recommended for children aged 6 months to 2 years, suitable for toddlers who are developing motor skills and coordination.

What type of batteries does the LeapFrog 80-600360 Stack and Tumble Elephant require?

The Stack and Tumble Elephant requires 2 AA batteries. Ensure you have fresh batteries available to keep the toy functioning correctly.

What features does the LeapFrog 80-600360 Stack and Tumble Elephant offer?

The toy includes stacking rings and interactive elements that respond with lights and sounds, encouraging children to stack and unstack the rings and explore different textures and shapes.

What materials is the LeapFrog 80-600360 Stack and Tumble Elephant made from?

The Stack and Tumble Elephant is made from durable, child-safe plastic designed to withstand regular use and interaction by young children.

What is the warranty period for the LeapFrog 80-600360 Stack and Tumble Elephant?

The toy comes with a 3-month warranty, covering any potential manufacturing defects or issues.

How does the LeapFrog 80-600360 Stack and Tumble Elephant support child development?

The Stack and Tumble Elephant supports motor skill development, hand-eye coordination, and sensory exploration through stacking and interactive play.

What is the price of the LeapFrog 80-600360 Stack and Tumble Elephant?

The LeapFrog 80-600360 Stack and Tumble Elephant is priced at $10.00, making it an affordable option for educational play.

Where is the LeapFrog 80-600360 Stack and Tumble Elephant manufactured?

The Stack and Tumble Elephant is manufactured by VTech, known for producing high-quality educational toys for young children.

Why is my LeapFrog 80-600360 Stack and Tumble Elephant not turning on?

Ensure that the batteries are properly installed and have sufficient charge. If the elephant still doesn’t turn on, try replacing the batteries with fresh ones.

What should I do if the sound on my LeapFrog 80-600360 Stack and Tumble Elephant is not working?

Check the volume settings on the toy. If the sound is still not working, try replacing the batteries as they may be low.

Why are the rings on my LeapFrog 80-600360 Stack and Tumble Elephant not registering correctly?

Make sure the rings are placed firmly on the trunk. If they’re still not registering, try resetting the toy by turning it off and on again.

What can I do if the lights on my LeapFrog 80-600360 Stack and Tumble Elephant are not working?

Low battery power might affect the lights. Replace the batteries and check if the lights work. If not, the toy might need further inspection.