LeapFrog 6195 Tap a Peg Wooden Truck Instruction Manual

LeapFrog 6195 Tap a Peg Wooden Truck

Specifications

• Brand: Tap-a-Peg
• Product Name: Tap-a-Peg Wooden TruckTM
• Power Source: 3 AAA batteries (not included)
• Recommended Age: 18 months and up

Product Information

The Tap-a-Peg Wooden TruckTM is an interactive toy truck designed to engage young children in fun learning activities. With various modes and activities, it helps develop motor skills, color recognition, number recognition, and more.

Product Usage Instructions

Getting Started

1. Unlock the Packaging Locks: Rotate the packaging locks 90 degrees counterclockwise and discard.
2. Battery Removal and Installation:
3. Ensure the unit is turned off.
4. Use a screwdriver to open the battery cover located on the back of the unit.
5. Remove old batteries and install 3 new AAA batteries following the diagram inside the battery box.
6. Replace the battery cover and tighten the screw.

Product Features

• Off/Low/High Volume Switch: Slide to Low or High for volume control and Off to turn off the device.
• Horn/Activity/Music Button: Press to trigger truck sounds, learning activities, and songs.
• Mode Switch: Choose Number, Color, or Shape mode.
• Hammer: Pound pegs to practice motor skills or push them with hands. Hammer can be stored under the truck.
• Pegs: Pound or push pegs down for learning phrases.

Activities

The Horn/Activity/Music Button activates various games including Let’s Paint, Hammerin’ Time (Numbers), Hammerin’ Time (Shapes), Speed Pounding, Light the Lights, Fix the Truck, Customer Orders, and Deliveries.

Song Lyrics

“It’s Hammerin’ Time! Start the truck, drive it around! Find a peg and give it a pound! It’s Hammerin’ Time! Wheels the Cat and Hank the Hound…”

Care & Maintenance

1. Keep the unit clean by wiping with a slightly damp cloth.
2. Avoid direct sunlight and heat sources.
3. Remove batteries if not in use for an extended period.

FAQ

• Q: What type of batteries does the Tap-a-Peg Wooden TruckTM require?
  • A: The truck requires 3 AAA batteries (AM-4/LR03), preferably alkaline or fully charged Ni-MH rechargeable batteries for best performance.
• Q: Can children below 18 months use this toy?
  • A: It is recommended for children aged 18 months and above due to small parts that may pose a choking hazard.

Instruction Manual

This manual contains important information. Please save it for future reference

INTRODUCTION

Thank you for purchasing the Tap-a-Peg Wooden Truck™.

INCLUDED IN THE PACKAGE

• Tap-a-Peg Wooden Truck™
• Hammer
• Quick Start Guide

WARNING:

All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE:

Please save this Instruction Manual as it contains important information.

Unlock the Packaging Locks

1. Rotate the packaging locks 90 degrees counterclockwise.
2. Pull out the packaging locks and discard them.

GETTING STARTED

Battery Removal and Installation

1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a screwdriver to loosen the screw and then open the battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 3 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.)
5. Replace the battery cover and tighten the screw to secure it.

WARNING: Adult assembly is required for battery installation. Keep batteries out of reach of children

IMPORTANT: BATTERY INFORMATION

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

• Remove rechargeable batteries (if removable) from toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

PRODUCT FEATURES

1. Off/Low/High Volume Switch
   Slide the selector to turn the device on and select the desired volume. To turn the unit off, slide the selector to the 0 Off position.

2. Horn/Activity/Music Button
   Press to trigger a range of exciting responses. Hear realistic truck sounds, play fun learning activities and sing along to delightful songs!

3. Mode Switch
   Choose Number, Color or Shape mode.

4. Hammer
   Use the hammer to pound the pegs and practice motor skills. Little ones can also push the pegs with their hands if they like. When not in use, the hammer can be stored under the truck.

5. Pegs
   Pound or push pegs all the way down to hear fun learning phrases.

ACTIVITIES

Pressing the Horn/Activity/Music Button activates sounds, songs and learning games. Games include:

1. Let’s Paint
   Listen to the colors that Hank says, then pound them. See if you can get ten before time runs out!

2. Hammerin’ Time (Numbers)
   Pound the numbers as they are called out!

3. Hammerin’ Time (Shapes)
   Listen to the shapes, then whack ‘em!

4. Speed Pounding
   Pound as many pegs as you can before the music stops!

5. Light the Lights
   Pound all of the pegs to turn on all of the lights.

6. Fix the Truck
   Pound any peg to rev and fix the engine. Keep pounding pegs until the truck starts.

7. Customer Orders
   Duck, Goat or Pig need your help to fill customer orders. Pound the correct peg to help them.

8. Deliveries
   Pound any peg to complete a delivery for one of the animal customers.

SONG LYRICS

It’s Hammerin’ Time!

Start the truck, drive it around! Find a peg and give it a pound! It’s Hammerin’ Time!

Wheels the Cat and Hank the Hound

• I’m Wheels the Cat!
• And I’m Hank the Hound.
• I like to drive,
• And I’m from the pound!
• Wherever we go,
• We’ve got shapes in tow.
• Woof woof!
• Meow!
• Engine revs and away we go!

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries if the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
5. If the unit stops working or malfunctions, install a new set of batteries.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions,

please follow these steps:

1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.

IMPORTANT NOTE:

If the problem persists, please contact our Consumer Services Department at 1-800-701-5327 in the U.S. and Canada, or email support@leapfrog.com. Creating and developing LeapFrog products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

• Trade Name: LeapFrog®
• Model: 6195
• Product Name: Tap-a-Peg Wooden Truck™
• Responsible Party: LeapFrog Enterprises, Inc.
• Address: 2200 Powell St., Suite 500
• Emeryville, CA 94608
• Website: leapfrog.com

THISDEVICECOMPLIESWITHPART15OFTHEFCCRULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Visit our website for more information about our products, downloads, resources and more.

• leapfrog.com
• leapfrog.ca

Read our complete warranty policy online at

• leapfrog.com/warranty
• leapfrog.ca/warranty

LeapFrog Enterprises, Inc. A subsidiary of VTech Holdings Limited. TM & © 2024 LeapFrog Enterprises, Inc. All rights reserved. IM-619500-000 Version:0

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>