LeapFrog Nature Walk Touch and Learn Wooden Walker Instruction Manual

LeapFrog Nature Walk Touch and Learn Wooden Walker

Specifications

• Brand: Nature Walk
• Product Name: Touch & Learn Wooden Walker
• Material: Wooden
• Recommended Age: 12 months and up
• Battery Requirement: 3 AA (AM-3/ LR6) batteries

Product Usage Instructions

• Attach the front panel to the gear side panel using 4 screws. Tighten the screws with the hex wrench.
• Snap the handle into place.
• Attach the supporting bar to the side panel at the base with 2 screws.
• Attach the side panel with the sliding window to the front panel and supporting bar with 6 screws.
• Attach the front wheels by snapping them into place.
• Ensure the unit is turned off.
• Loosen the screw on the battery cover using a screwdriver and open the cover.
• Remove old batteries by pulling up on one end of each battery.
• Install 3 new AA batteries following the diagram inside the battery box.
• Replace the battery cover and tighten the screw.

FAQ

• Q: What should I do if the music button is not working?
• A: Ensure that the unit is powered on and that the volume is adjusted properly. If issues persist, check the battery installation.
• Q: Can I use rechargeable batteries with this product?
• A: Yes, rechargeable batteries can be used for this product. We recommend fully charged Ni-MH rechargeable batteries for the best performance.

Instruction Manual
This manual contains important information. Please save it for future reference.

INTRODUCTION

• Thank you for purchasing the Nature Walk Touch & Learn Wooden WalkerTM! Take some first steps around the house with this eco-friendly wooden walker.
• Discover shapes, colors, numbers, animals, and seven different musical styles.

INCLUDED IN THE PACKAGE

• Nature Walk Touch & Learn Wooden WalkerTM (in 7 pieces)

Assembly materials

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
NOTE
Please ask us about the availability of FSC Products.

ASSEMBLY Instructions

1. Attach the front panel to the gear side panel with 4 screws. Use the hex wrench to turn 4-5 turns to tighten the screws.
2. Attach the handle with a one-time snap.
3. Attach supporting bar to side panel at base with 2 screws.
4. Attach the side panel with a sliding window to the front panel and supporting bar with 6 screws.
5. Attach front wheels with a one-time snap.

• A hex wrench given in this package is not a toy. Please retain this tool for future use. Please store it where the child cannot access it.

INSTRUCTIONS

Battery Removal and Installation

1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a screwdriver to loosen the screw, and then open the battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 3 new AA (AM-3/ LR6) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.)
5. Replace the battery cover and tighten the screw to secure it.

WARNING

• Adult assembly is required for battery installation.
• Keep batteries out of reach of children.

CAUTION
Adult assembly is required. This product contains small parts. For your child’s safety, do not let your child play with the toy until it is fully assembled.

IMPORTANT: BATTERY INFORMATION

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

• Remove rechargeable batteries (if removable) from toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

PRODUCT FEATURES

1. Off/Low/High Volume Switch
   To turn the unit On, slide the Off/Low/ High Volume Switch to the Low or High position. To turn the unit Off, slide the Off/Low/High Volume Switch to the Off position.

2. Speed Control
   Speed Control allows for 2 Ways to Play. Move the setting to while seated, playing with Shape Blocks, Animal Buttons, Light-Up Number Buttons and Fine Motor Manipulatives. Change the setting to to practice walking.

3. Mode Switch
   Slide the Mode Switch to choose Explore, Learn or Music Mode.

4. Light-Up Number Buttons
   Press the five colorful Light-Up Number Buttons to learn about numbers and counting objects in nature.

5. Animal Buttons
   Press one of the seven colorful Animal Buttons to learn animal names, colors and sounds.

6. Flower Petal Shape Blocks
   Pop the four Shape Blocks into the Flower Petal Shape Sorter to practice hand- eye coordination while learning about colors and shapes.

7. Music Button
   Press the Music Button to have fun learning songs and melodies.

8. Fine Motor Manipulatives
   Flip the caterpillar disc to reveal a butterfly, slide the ladybug, turn the gears, slide the beads, spin the snail bead roller, or play with the peek-a-boo slider.

9. Weather Dial
   Turn the Weather Dial to explore sunny, rainy, and snowy weather and activities.

10. Star Lights
    Watch the Star Lights perform a colorful starry light show in time with the music.

Lyrics Nature Walk Song

• Walking, we’re talking,
• About colors in nature,
• A blue bird, a red fox,
• A green grasshopper,
• I see a purple butterfly,
• 1, 2, 3, 4, 5！

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries if the unit will not be in use for an extended time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.

Environmental Phenomena

• The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when the interference stops. If not, it may become necessary to turn the power Off and back On, or remove and reinstall the batteries.
• In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IMPORTANT NOTE
If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. and Canada, or email support@leapfrog.com. Creating and developing LeapFrog products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products.
However, errors sometimes can occur. You need to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

Supplier’s Declaration of Conformity

• 47 CFR § 2.1077 Compliance Information
• Trade Name: LeapFrog®
• Model: 6196
• Product Name: Nature Walk Touch & Learn Wooden Walker™
• Responsible Party: LeapFrog Enterprises, Inc.
• Address: 2200 Powell Street, Suite 500
• Emeryville, CA 94608
• Website: leapfrog.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

• Visit our website for more information about our products, downloads, resources, and more. leapfrog.com. leapfrog.ca Read our complete warranty policy online at leapfrog.com/legal

A subsidiary of VTech Holdings Limited. © 2024 LeapFrog Enterprises, Inc. All rights reserved. IM-619600-000 Version:1

References

• Kids Learning Games | Educational Toys & Kids Tablets | LeapFrog
• Kids Learning Games | Educational Toys & Kids Tablets | LeapFrog

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>