SHARPER IMAGE 209485 LED Moon Phase Simulation Clock Instruction Manual

SHARPER IMAGE 209485 LED Moon Phase Simulation Clock

Specifications

• Product size: 29529525mm
• Product weight: 1158g
• Product material: MDF+PVC
• Power supply: DC 5V

Product Usage Instructions

Setting Instructions

Time Setting
In time display mode, press the button SET till the numbers are flashing to enter the setting mode. Adjust Year, Month, Date, Hour, and Minute as needed.

Setting of Date
In the time mode, press the button SET to enter setting mode. Use the UP or DOWN buttons to adjust Year, Month, and Date respectively. Long press the UP or DOWN button for continuous adjustment.

Time Setting
In the setting mode, press SET again 3 times to adjust the hour and minute. The seconds automatically reset to zero when minutes are changed.

Moon Phase Setting”
The moon phase changes automatically according to the set date.

12H/24H Setting
In the time mode, press the DOWN button to adjust between 12-hour and 24-hour systems.

Brightness Setting
Press the UP button to adjust the brightness of the clock. Select from five levels of luminance ranging from LS (brightest) to L1 (darkest).

Tips

• If the clock malfunctions, press the reset button on the back.
• Replace the CR2032 batteries when necessary to maintain clock settings.
• The setting mode will automatically exit after 15 seconds of inactivity.
• For cleaning, gently wipe with a cloth or paper towel dampened with water; avoid immersion in water.

Legend

Specification

• Product size: 29529525mm
• Product weight: 1158g
• Product material: MDF + PVC
• Power supply: DC 5V

Setting Instruction

Time Setting
In time display mode, press the button “SET” till the numbers flashing to enter the setting mode. In the setting mode, you can do the settings including “Year” “Month” “Date” “Hour” “Minute”.

Setting of Date
In the time mode, press the button “SET” to enter setting mode. Press button “UP” or “DOWN” to adjust the “Year” “Month” “Date” respectively. After setting the date, the week will change automatically (Long press the “UP” or “DOWN’ button to continuously increase/decrease).

Week comparison table

Time Setting
In the time mode, press the button “SET” to enter setting mode and press “SET” again 3 times. The hour is flasing. Press “UP” or “Down” to adjust the hour

Press “SET” again, the minute is flashing. Press “UP” or “Down” to adjust the mins. Seconds automatically return to zero when minutes are changed.

Moon Phase Setting
Moon phase changes automatically accordina to the set date.

3 12H/24H Setting

• In the time mode, press the button “DOWN” to adjust the 12H/24H setting,
• When “AM/PM” appears on the left side of “hour”, it is 12H system. When the symbol of “AM/PM” disappear, it is 24H system.

Brightness Setting
Press the button “UP” to adjust the brightness of clock. There are five luminance for your choice: L5-L1, where L5 is the brightest and L1 is the darkest.

Tips

1. When the function is abnormal or the display is abnormal (Such as no picture displays in the screen when the power is plugged in), press the reset button on the back for the product to reactivate it.
2. The clock is equipped with two CR2032 batteries to keep the memory of clock setting. Simply replace the battery if the battery is off.
3. If no operation is performed for 15 seconds after entering the setting mode, it will automatically exit the setting mode.
4. The item to be set will flash at a frequency of “1HZ”, and press the “UP” or “DOWN” button once to increase/decrease in a single step. Long press the “UP” or “DOWN” button to continuously increase/decrease.
5. To clean the clock, use a cloth or paper towel with water and wipe gently, do not immerse the clock completely in water or rinse directly with water.

FAQ

• Q: How do I change the brightness of the clock?
  • A: Press the UP button to adjust the brightness level.
• Q: What should I do if the clock display is abnormal?
  • A: Press the reset button on the back of the clock to reactivate it.
• Q: How do I clean the clock?
  • A: Use a cloth or paper towel dampened with water to gently wipe the clock; avoid submerging it in water.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>