FORTE HVKK721 Shelf Office Standing Instruction Manual
- August 21, 2024
- FORTE
Table of Contents
FORTE HVKK721 Shelf Office Standing
Dimension And Tools Required
Assembling Instruction
Furniture containing wood-based panels (particle board, fibreboard, plywood etc.) may emit into indoor air inconsiderable amounts of substances used in the production processes. The level of this emission is examined and it meets the applicable standards. After assembling the furniture, it is advised to regularly ventilate the room where the furniture stands, which should last about four weeks or until the smell is eliminated.
| CODE | DIMENSIONS | Coli-0001 | Coli-0002 |
|---|---|---|---|
| 021773 | 760x746x2 | 1 | |
| 142767 | 726x390x15 | 1 | |
| 142768 | 726x390x15 | 1 | |
| 142775 | 330x410x22 | 2 | |
| 329559 | 748x390x22 | 1 | |
| 329564 | 748x393x22 | 1 | |
| 329566 | 748x411x22 | 2 | |
| 329567 | 748x411x22 | 1 | |
| 42230 | 716x375x15 | 1 | |
| 535536 | 1995x60x32 | 2 | |
| 535537 | 1995x60x32 | 2 | |
| 535542 | 292x60x32 | 6 | |
| 632897 | 573x370x15 | 2 | |
| 72677 | 742x189x15 | 1 | |
| 80479 | 1410x140x12 | 1 | |
| 90838 | 697x349x2 | 1 |
Before suspending or fixing furniture to the wall (in order to prevent falling
over), check the type and strength of the wall. Select wall plugs and screws
appropriate for the given type of the wall.
In the case of doubts, contact a specialist. The installation must be
performed by a competent person. WARNING!!! If the rawlplugs with screws are
attached to the product, then they are intended only for walls made of solid
and homogeneous materials.
To prevent the piece of furniture from falling over, please attach it permanently to the wall.
GUIDELINES FOR FURNITURE CARE
Please follow the below specified remarks in order to properly take care of
your furniture:
A clean dry soft fabric must be used for cleaning. If the furniture requires
thorough cleaning, then you can slightly moistened it with water or cleaning
agent designed for furniture cleaning, and subsequently the cleaned elements
must be wiped until they’re dry.
Metal and glass parts must be cleaned using commercially available cleaning
agents designed for cleaning of this type of materials, in accordance with the
included instructions.
Do not use corrosive agents, scouring agents and other agents if their
intended use is unknown.
The cleaning agents must have clear marking that they are intended for
cleaning furniture.
WARNING!!! High gloss elements, from which the protective foil was
removed, may be cleaned and used only after 72 hours.