FORTE EZNK231 Sideboard Chest Drawers Elzzan Instruction Manual
- June 1, 2024
- FORTE
Table of Contents
FORTE EZNK231 Sideboard Chest Drawers Elzzan
Assembling instruction
Follow the manufacturer’s assembly instructions, otherwise danger may occur.
Furniture containing wood-based panels (particle board, fibreboard, plywood etc.) may emit into indoor air inconsiderable amounts of substances used in the production processes. The level of this emission is examined and it meets the applicable standards. After assembling the furniture, it is advised to regularly ventilate the room where the furniture stands, which should last about four weeks or until the smell is eliminated.
Service
DEAR CUSTOMER
After full assembly and set up of the furniture made of high gloss elements,
you must remove the protective foil. In the case, where such elements are
connected together during assembly, then the foil must be removed partially
only from the places of connection. Removal of the foil should be completed
after full assembly and set up of the furniture.
WARNING!!! After removal of foil, the elements can be cleaned and used
only after 72 hours. The cleaning must be conducted with the use of delicate
and soft fabrics and if it’s necessary, the fabrics may be slightly moistened
with water or cleaning agent intended for cleaning furniture.
Before suspending or fixing furniture to the wall (in order to prevent falling
over), check the type and strength of the wall. Select wall plugs and screws
appropriate for the given type of the wall. In the case of doubts, contact a
specialist. The installation must be performed by a competent person.
WARNING!!! If the raw plugs with screws are attached to the product, then
they are intended only for walls made of solid and homogeneous materials.
To prevent the piece of furniture from falling over, please attach it permanently to the wall.
GUIDELINES FOR FURNITURE CARE
Please follow the below specified remarks in order to properly take care of
your furniture:
- A clean dry soft fabric must be used for cleaning. If the furniture requires thorough cleaning, then you can slightly moistened it with water or cleaning agent designed for furniture cleaning, and subsequently the cleaned elements must be wiped until they’re dry.
- Metal and glass parts must be cleaned using commercially available cleaning agents designed for cleaning of this type of materials, in accordance with the included instructions.
- Do not use corrosive agents, scouring agents and other agents if their intended use is unknown.
- The cleaning agents must have clear marking that they are intended for cleaning furniture.
- WARNING!!! High gloss elements, from which the protective foil was removed, may be cleaned and used only after 72 hours.