BARSKA BC528 Starwatcher Telescope Instruction Manual
- June 14, 2024
- BARSKA
Table of Contents
BARSKA BC528 Starwatcher Telescope
Parts Included
CAUTION
DO NOT LOOK DIRECTLY AT THE SUN. VIEWING THE SUN OR ANY LIGHT SOURCE WITH
THIS OPTICAL DEVICE CAN CAUSE PERMANENT EYE DAMAGE.
Assembly
- Attach (F) tripod leg screw to the extension base on each of the (Q) tripod legs.
- Attach each (Q) tripod leg to the (J) yolk mount using the (E) leg to yolk screw sets.
- Use the (H) three tripod screws on the (N) centre leg brace to connect each of the centre leg braces to the three (Q) tripod legs
- Line up the (L) main telescope optical tube with the side mount holes on the (J) yolk mount and secure in place using the two (D) optical tube screws
- Insert the (O) slow-motion control rod into the hole on the (J) yolk mount.
- Secure the (O) slow-motion control rod with the included (P) control rod screw by tightening it with the included (G) screwdriver.
- Remove the (K) knurled nuts and attach the (I) finderscope to the (L) main telescope optical tube with the battery compartment and lens facing the front of the telescope. Secure by tightening the (K) knurled nuts.
- Insert the barrel of the (C) diagonal into the focuser tube on the (L) main telescope optical tube and tighten the set screw.
- Choose one (B) eyepiece and insert the chrome barrel of the eyepiece into the (C) diagonal and tighten the set screw. See the reverse side for additional information.
- Insert the Barlow lens (M) into the rear side of the Diagonal (C) and tighten the thumb screw on the diagonal.
2017 BARSKA
BC528 Pomona, CA 91767 | (t) 888.666.6769 | (f) 909.445.8169 |
www.barska.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>