Kellfri 28-RBH Paddock Harrow Instruction Manual

Kellfri 28-RBH Paddock Harrow

INTRODUCTION

Thank you for choosing a product from Kellfri AB. By following the general safety information, instruction manual and common sense, you will get many years of enjoyable use of the product. Kellfri’s tools and machines are aimed for farmers with high demands on functionality.

PRODUKTINFORMATION

A flexible solution with everything included!
Crossboard, 2 rows of harrow tines and roller come as standard with Kellfri’s new paddock harrow. Plus side scraper with support wheel to collect material pushed out from the track. The cross board and roller use the same attachment so the crossboard can be positioned at the very back if the substrate requires this type of levelling. The different equipment can be adjusted individually with manual crank handles. If the substrate requires more weight when levelling, there are two load boxes measuring 37 x 37 cm. Manual winch for changing between transport and work modes.
Tow bar: 50 mm tow bar ball hitch
Weight box: 370 x 370 mm

INTENDED USE

The product is intended to be used on gravel paths, riding tracks.
Always handle the harrow correctly, in inexperienced hands the equipment can be dangerous.

SAFETY INSTRUCTIONS

Before using the equipment or product, and for the safety of yourself and others, you must read the safety instructions and the instruction manual and understand its contents. Always keep the safety instructions and instruction manual handy for users of the equipment or product.
For the safety of both yourself and others, it may be a good idea to read through the safety instructions every now and then. If the safety instructions or instruction manual gets damaged or in any other way cannot be used, new copies may be ordered from:
Kellfri AB, Storsvängen 2, 532 38 SKARA
Sweden. Tel.: +46 (0)511 242 50 (Pls. contact the retailer) https://www.kellfri.co.uk/
Do not use the equipment or product if you feel ill, tired or are under the influence of alcohol.
Do not use the equipment or product if you are taking prescribed medication or drugs.
Always comply with general rules of the road and applicable rules stipulated by the Swedish Protection of Animals Act. People under the age of 15 are not allowed to use the equipment.

Kellfri disclaim any responsibility for self-made modifications, changes or alterations.

PRODUCT SAFETY INSTRUCTIONS

Please read the operators manual. Always check the performance and the combination of the machine to be used together with the harrow.

• Be careful at road transport and follow traffic rules. Make sure that the tractor has sufficient weight on the front for safe driving.
  Avoid sharp turns.

• When servicing, place the equipment on level ground.

• Only the operator is allowed to be within the vicinity of the equipment during operation.

• Do not let anyone ride on the paddock harrow!

• The harrow is operated from the driver’s seat.

• Danger zone 5 meters.

• No one other than the operator may be present within the danger zone during work.

• Parking is done with the implement resting on the ground.

• To stop the harrow movement, in an emergency, stop the tractor.
  

INSTRUCTION FOR EMERGENCIES

In case of an emergency please dial 112.
Keep cell phone or emergency phone available specially when working alone. First aid kit and fire extinguishers must be kept easily accessible during all work, maintenance and service. To stop winch movements, release the starter cord.

WARNING DECALS

Make sure that the warning labels are always visible, clean the warning labels if necessary. Do not wash with high pressure washer directly on the warning label. If any part of the decal is worn or label becomes frayed or otherwise unreadable, order new decals.

the winch for lifting any load!
| WARNING! Risk of pinching/squeezing injuries!
| Warning! Do not let anyone ride on the machine
| Warning! Accident risk for children!

Children re not allowed to be near the machine. Children in the area should be supervised.

| The product is CE-Marked

PERSONAL PROTECTIVE EQUIPMENT

Wear suitable clothing and footwear. Do not wear loose clothing or jewelry when working with the equipment. Remember to put up long hair when working with equipment that rotates.

SURROUNDINGS

Check and make sure that the area is clear of people, children and objects before switching on or using the equipment. Risk of serious personal injury.
Be especially careful if children are in the area where the equipment is being use or stored.
Check that there are no low-hanging power lines within the work area. Be careful when working on slopes and near ditches.
Always work alone with equipment designed for single – purpose tools/products. Never have junk/debris lying in your work area. Have work spaces clean. Always respect the risk zone.

BEFORE USING

Read the instruction manual carefully. Be sure that you understand the safety information, instruction manual and warning labels. Use common sense when using and use the appropriate personal protective equipment.

Always check the performance of the machine combination to be used. Importantly, these harmonize and match in a satisfactory manner. This is to ensure the implement function and your and others’ safety.

Visually inspect the gear or the product before use. Fix or replace damaged and worn parts immediately to reduce the risk of injury. Lubricate moving parts and check that all screw-nuts and bolts are tightened. Clearing when necessary.

Learn and remember the correct working methods. Beginners should always keep a low speed, use extreme caution before routine and product knowledge is achieved. The user/customer is responsible to handle the situation correctly. The product should not be taken into use unless it can be done in a safe way for the user.

CONNECTING THE MACHINE TO ATV

• Check the product if it’s damaged before connecting it to the vehicle. Repair if necessary.
• Connect the harrow onto the ATV. Make sure that the machine cannot come off.
• Set the desired angle of the different functions; rossboard, harrow tines and roller.
• Drive and check the machines movement before starting your work.
  

OPERATING THE MACHINE

Only people who understand the safety information and instructions in this manual may operate the equipment. Be alert and careful when working with the machine and only use the tool or product in the manner described in this manual. When working with equipment that has moving parts, there is always the risk of injury. Always work alone with the tools that are defined as single purpose tools. Respect the equipment’s danger zone.

• Check the surface of the ground/working area before starting the operation
• Reduce speed when working on slopes and uneven terrain.
• All maneuvers is done at the vehicle’s driver position.
• Practice the movement pattern calmly and methodically when raking the gravel paths / gravel fields.
• Maximum driving speed is 10 km / h.
• Adjustment of the various tools is done with adjusting levers/crank handles.
• The machine is equipped with side scraper (plow) with the steering wheel towards the rim to pull the material or pushed out from the groove.
• If the surface requires more weight during operation, there are two weight boxes (A) with size 37 x 37 cm. Don’t overload the machine, max. allowed weight on weight boxes is 20kg + 20kg.
  

TRANSPORT AND STORING

Make sure there are no people, children and other foreign objects around the area before transporting the machine. Always take an extra caution during the transport. Ensure that the product is well secured and that transport brackets are mounted. Always place the load as low as possible. Respect the danger zone even during transport. When lifting the equipment, never go underneath suspended loads. Trailer used for transport should have working brakes.
Always store the machine in a dry place preferably underneath a cover when not in use. Ensure that the product is stable and not likely to tip over. Never let children play where the machine is being stored. Always keep in mind the risk of tipping!

MAINTENANCE AND SERVICE

Ensure that the unit is stable and cannot tip over during maintenance and service. Replace damaged or worn parts immediately to reduce the risk of abrasion. Always perform maintenance, service and inspection, as recommended. Use only original replacement parts or spare parts with equivalent performance to reduce the risk of damage. All repairs and connections with electricity must be performed by an authorized person.

• Regularly check the condition of the harrow before the failure is a fact. When cracks, twisting, bending, glitches or fatigue of parts are discovered, stop the operation and rectify the error. Worn parts shall be replaced. Disconnect the machine from the vehicle when repairing any parts.
• Rinse the machine with water if necessary.

AFTER USE

When the machine is not in use, store it underneath a cover. It’ll extend the lifespan of the product.
For parts: Contact Kellfri Service

ASSEMBLY

Checklist all parts:

• (A) 1x roller
• (B) 1x attachment for the roller
• (C) 1x frame with harrows
• (D) 1x side scraper and wheel
• (E) 1x board
• (F) 1x attachement for the board
• (G) 3x crank
• (H) 1x frame with weight boxes
• (I) 1x wheel axle frame
• (J) 2x wheels
• (K) 1x drawbar with winch
• (L) 1x bolt kit

ASSEMBLY I

It is recommended that the assembly of the paddock harrow be carried out by 2 persons due to its weight. After assembly, check that all bolts are tightened.

Harrow tines and crossboard are mounted under the frame with weight boxes

ASSEMBLY II: ROLLER

ASSEMBLY OF WHEELS 2PCS AND CRANK HANDLES 3PCS

SPARE PARTS

COMPLAINT FORM

We are grateful for your help pointing out any inaccuracies in the Kellfri product delivered to you. Before making a complaint read Kellfris general warranty and sales conditions in our catalog as well as the enclosed User’s manual that comes with the machine.

Please fill in the details below and attach photo and other information in order to process your request.

upon the first operation?
---|---|---
Defect product / part:|
---|---
Problem description:|
Describe the sequence of events:|
Other:**|

Submit Complaint form and photo to:
Kellfri AB
Division of Services : Contact Kellfri retailer
Munkatorpsgatan 6
532 37 Skara
Or e-mail service.
[email protected]

Signature:| | Date:|
---|---|---|---

KELLFRI AB
Storsvängen 2
SE-532 38 SKARA
Phone: +46 (0)511-242 50
Fax. +46 (0)511-168 33
Web
www.kellfri.se
E-mail
[email protected]
Issue:: 2014-01-01

WARRANTY TERMS AND CONDITIONS

• Validity of the warranty
  – Kelifri’s Warranty is valid 12 months from the date of purchase.

• This warranty replaces
  – Compensation for spare parts after acknowledgment that the fault lies on the material or manufacturing defects.

• This guarantee do not cover
  • Labour costs
  • Travel expenses
  • Any modification that the buyer himself has/had made.
  • Any consequential damages that occurred due to damage to the machine.
  • Damage due to normal deterioration of the machine, inadequate: service, user inexperience or use of spare parts which are not original.
  • Wear parts such as hoses, seals, oils, and mechanical belts

EC-DECLARATION OF CONFORMITY, ORIGINAL

According to 2006/42/EC, Annex 2A
Kellfri AB
Storsvängen 2
532 38 Skara, Sweden
Declares that the machine
Name: 28-RHB
Type: Paddock Harrow
Complies with all applicable provisions of the Machinery Directive 2006/42/EC.
Other equipment must meet the hardware requirements of the Directive.

Kjell Johansson
Product Development Manager

CUSTOMER SERVICE

You are always welcome to give your feedbacks, reviews or ask us about our equipment and products.
Kellfri AB is constantly working on further developing their products and therefore reserves the right to modify, among other things the design and appearance without further notice.

KELLFRI AB
Phone no: +46 (0)511 – 242 50
Fax: +46 (0)511 – 168 33
E-post: [email protected]
Last updated 2023-04-11

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>