BERTAZZONI REF36FDBZPNV Built In French Door Refrigerator Instructions
- August 22, 2024
- Bertazzoni
Table of Contents
BERTAZZONI REF36FDBZPNV Built In French Door Refrigerator
Product Specifications
- Model: REF36FDBZPNV/24.
- Installation: Built-in French Door Bottom Mount.
- Custom Door Panels: To be manufactured and fitted by cabinet maker and installer.
NOTE : The refrigerator comes with a 4” (100 mm) stainless steel toe kick installed to fit a standard 84” (2134 mm) tall cabinet niche. For different toe kick heights, adjust C accordingly. For flush installation in a standard 25” (635 mm) deep cabinet niche, maximum custom door panels thickness is 3/4” (19 mm).
Dimensions
(A) Height of custom top door panel (each) | 51 1/16″ (1297 mm) |
---|---|
(B) Width of custom top door panel (each) | 17 3/4″ (451 mm) |
(B1) Gap between custom top door panels | 3/16″ (5 mm) |
(B2) Gap between custom door panels and cabinet | 1/8″ (3.5 mm) |
(C) Height of custom bottom drawer panel | 28 11/16″ (729 mm) |
(D) Width of custom bottom drawer panel | 35 11/16″ (907 mm) |
(E) Toe kick height | Min 3 3/4″ (96 mm) – Max 5 3/8″ (136 mm) |
(F) Cabinet height | Min 83 13/16″ (2129 mm) – Max 85 3/8″ (2169 mm) |
(G) Cabinet width | 36″ (914 mm) |
Thickness of custom door panels for flush install | Max 3/4″ (19 mm) |
Weighing
- Maximum weight of each custom top door panel: 44 lbs (20 kg)
- Maximum weight of custom bottom drawer panel: 20 lbs (9 kg)
Disclaimer : While every effort has been made to ensure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change any part of the information at any time without notice. For detailed installation specifications, consult the installation manual. Fratelli Bertazzoni, Bertazzoni, and the winged wheel brand icon are registered trademarks of Bertazzoni Spa. Version 2.0. www.bertazzoni.com
Product Usage Instructions
Panel Installation
- Contact a cabinet maker and installer to manufacture and fit the custom door panels.
- Ensure the dimensions of the panels align with the specifications provided.
- Adjust the toe kick height if necessary based on the cabinet niche.
- For flush installation, ensure the custom door panels do not exceed a thickness of 3/4″ (19 mm).
Maintenance
Regularly clean the custom door panels with a mild detergent and water solution. Avoid using abrasive cleaners that may damage the panels’ finish.
Troubleshooting
If you encounter any issues with the custom door panels, contact the manufacturer or a qualified technician for assistance.
Frequently Asked Questions (FAQ)
Q: Can I install the custom door panels myself?
A : It is recommended to have a professional cabinet maker and
installer handle the manufacturing and fitting of the custom door panels to
ensure proper installation.
Q: What should I do if the custom door panels do not fit correctly?
A : If the panels do not fit as expected, consult with the cabinet
maker or installer to make necessary adjustments for a proper fit.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>