GE Profile PFD95ESPWGN 7.8 cu ft. Capacity Smart Front Load Electric Dryer Installation Guide

PFD95ESPWGN 7.8 cu ft. Capacity Smart Front Load Electric Dryer

“`html

Product Specifications:

• Brand: GE Profile

• Model: PFD95ESPWGN/PFD95ESPWDS

• Capacity: 7.8 cu. ft.

• Power Rating:

  • 120V/240V 5600W, 25A, 60Hz
  • 120V/208V 4300W, 23A, 60Hz

• Exhaust Options: 4-way via rear, left, right, and bottom (Side
  Vent Kit required for right, left, and bottom venting)

• Circuit Requirements: 30-amp circuit breaker or time-delay
  fuse

Installation Instructions:

Stacked Installation: Brackets for stacking
dryer over washer not included. Order part no. GFA28KITN.

Alcove or Closet Installation: Minimum
clearance to combustible surfaces on all sides and top.

Bathroom or Bedroom Installation: Follow
general installation requirements.

Venting Kits and Accessories: For more
information, call 1-800-GE-CARES.

Dryer Accessories:

• Metallic Touch-up Paint (Jade Green) – WH97X38418
• Non-Metallic Touch-up Paint (Jade Green) – WH97X38419

Exhaust Length Calculation:

1. The maximum length of 4 rigid duct is determined by the table
   provided.

2. Dryers must be exhausted to the outside to prevent fire hazards
   and damage.

3. Do not terminate exhaust into a chimney, crawl space, attic, or
   common duct with kitchen exhaust.

Frequently Asked Questions (FAQ):

Q: What is the warranty coverage for this dryer?

A: The dryer comes with a limited 1-year warranty for the entire
appliance and a limited 10-year warranty for the motor.

Q: What are the special installation requirements for this

dryer?

A: Special installation requirements include stacked
installation with additional brackets, alcove or closet
installation with specific clearances, and the need for various
accessories for optimal performance.

“`

PFD95ESPWGN/PFD95ESPWDS

GE ProfileTM 7.8 cu. ft. Capacity Smart Front Load Electric Dryer with Steam and Sanitize Cycle
Stacked:
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

ELECTRIC DRYER RATING 120V/240V 5600W, 25A, 60Hz 120V/208V 4300W, 23A, 60Hz

Riser:

Pedestal:

EXHAUST OPTIONS: 4-way via rear, left, right and bottom. (The right, left and bottom venting options require Side Vent Kit: GFA28DSVN)

CIRCUIT REQUIREMENTS: An individual, properly grounded branch circuit, protected by a 30-amp circuit breaker or a time-delay fuse, is required.

NOTE: Dryer wall outlet must be located within 36″ of service cord entry and accessible when dryer is mounted in position.

INSTALLATION INFORMATION: For complete information, see installation instructions packed with your dryer.

28″
(71.2 cm)

46 3/4″
(118.7 cm)

7″
ADA-Compliant
34″
(86.4 cm)

16″
56 1/2″
(143.5 cm)

55 7/8″
(141.8 cm)

79 1/2
(202 cm)

*39 3/4″
(101 cm)

*With leveling legs retracted: 39-3/4″ (101 cm).
With leveling legs fully extended: 40-5/8″ (103.1 cm).

Front View

Side View

22 1/2″
(57.15 cm)

6 1/8″

1-5/8″ 11 ”

Back View

3 5/8″

For answers to your Monogram, CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Product Specification Created 6/24

PFD95ESPWGN/PFD95ESPWDS
GE ProfileTM 7.8 cu. ft. Capacity Smart Front Load Electric Dryer with Steam and Sanitize Cycle

SPECIAL INSTALLATION REQUIREMENTS:
STACKED INSTALLATION: Brackets for stacking dryer over washer are not included with the dryer. Order part no. GFA28KITN.
ALCOVE OR CLOSET INSTALLATION:
­ If your dryer is approved for installation in an alcove or closet, it will be stated on a label on the dryer back.
­ The dryer MUST be exhausted to the outside.
­ Minimum clearances between dryer cabinet and adjacent walls or other surfaces are: 0″ all sides and top.
­ Closet doors must be louvered or otherwise ventilated and must contain a minimum of 60 sq. in. of open area equally distributed. If this closet contains both a washer and a dryer, doors must contain a minimum of 120 sq. in. of open area equally distributed.
BATHROOM OR BEDROOM INSTALLATION:
­ The dryer MUST be exhausted to the outside.
­ The installation must conform with the local codes, or in the absence of local codes, with the National Electric Code and National Fuel Gas Code, ANSI Z223 for gas dryers.
MINIMUM CLEARANCE OTHER THAN ALCOVE OR CLOSET INSTALLATIONS:
Minimum clearances to combustible surfaces 0″ all sides and top.
FOR MORE INFORMATION ON VENTING KITS AND ACCESSORIES, PLEASE CALL 1-800-GE- CARES.
*For improved performance, a 1/2″ clearance is suggested on each side. **Accessories sold separately.

DRYER ACCESSORIES**

GE PART NUMBER WH97X38418 WH97X38419 WR97X27706 WE02X29449 GFA28DSVN WE25X20060 WX17X10001CA GFP1528PWGN GFP1528PTDS GFR0728PWGN GFR0728PTDS GFA28KITN
WARRANTY

DESCRIPTION Metallic Touch-up Paint (Jade Green) 0.6 oz. Non-Metallic Touch-up Paint (Jade Green) 0.5 oz. pen Touch-up Paint (Carbon Graphite) 0.6 oz. Dryer Rack Assembly Side Vent Kit Steam Kit Vibration Pads Pedestal (Jade Green) Pedestal (Carbon Graphite) Riser (Jade Green) Riser (Carbon Graphite) Stacking Kit

Labor Warranty Parts Warranty

Limited 1-year entire appliance
Limited 1-year entire appliance Limited 10-year motor

28″
16″
28 7/8″
PEDESTAL DIMENSIONS (IN INCHES) The optional 16″ pedestal raises the door opening and height of the washer or dryer.

28″
7″
28 7/16″
RISER DIMENSIONS (IN INCHES) The optional 7″ riser raises the door opening and height of the washer or dryer while remaining ADA-compliant.

For answers to your Monogram, CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Product Specification Created 6/24

PFD95ESPWGN/PFD95ESPWDS
GE ProfileTM 7.8 cu. ft. Capacity Smart Front Load Electric Dryer with Steam and Sanitize Cycle

DRYER EXHAUSTING INFORMATION ­ METAL DUCT ONLY

For complete information, see installation instructions packed with your dryer.

A

DUCTING MATERIALS: For best performance, this dryer should be vented with 4″ diameter all-rigid metal exhaust duct. If rigid-metal duct cannot be used, then UL-listed flexible metal (semi-rigid) ducting can be used (Kit PM08X10084 or PM08X10085). In special installations, it may be necessary to connect the dryer to the house vent using a flexible metal (foil-type) duct. A UL-listed flexible metal (foil-type) duct may be used ONLY in installations where rigid metal or flexible metal (semi-rigid) ducting cannot be used AND where a 4″ diameter can be maintained throughout the entire length of the transition duct. Please see installation instructions packed with your dryer for complete instructions when using flexible metal (foil type) ducting.

EXHAUST LENGTH CALCULATION:

1. Determine the number of 90° turns needed for your installation. If you exhaust to the side or bottom of dryer, add one turn.

2. The maximum length of 4″ rigid (aluminum or galvanized) duct which can be tolerated is shown in the table.

A turn of 45° or less may be ignored. Two 45° turns within the duct length should be treated as a 90° elbow.

A turn over 45° should be treated as a 90° elbow.

Dryers must be exhausted to the outside.

CAUTION: For personal safety, do not terminate exhaust into a chimney, under any enclosed house floor (crawl space), or into an attic, since the accumulated lint could create a fire hazard or moisture could cause damage. Never terminate the exhaust into a common duct or plenum with a kitchen exhaust, since the combination of lint and grease could create a fire hazard.

Exhaust ducts should be terminated in a dampered wall cap to prevent back drafts, bird nesting, etc. The wall cap must also be located at least 12″ above the ground or any other obstruction with the opening pointed down.

FOR MORE INFORMATION ON VENTING KITS AND ACCESSORIES, PLEASE CALL 1-800-GE- CARES.

A 4″
4″
B
2 1/2″
Number of 90° turns
0 1 2 3 4

Domestic Dryer Models

Best Performance

Maximum length of 4″ dia. rigid metal duct

Exhaust hood type

A 4″ opening
90 ft. 60 ft. 45 ft. 35 ft. 25 ft.

B 2 1/2″ opening
60 ft. 45 ft. 35 ft. 25 ft. 15 ft.

6 1/8″

1 5 /8″ 11″

Optional 55″ long Power Cord
3 5 /8″
Dryer Vent

For answers to your Monogram, CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Product Specification Created 6/24

PFD95ESPWGN/PFD95ESPWDS
GE ProfileTM 7.8 cu. ft. Capacity Smart Front Load Electric Dryer with Steam and Sanitize Cycle

FEATURES AND BENEFITS
STEAM SANITIZE ­ Sterilize clothing with elevated temperatures designed to kill common household germs and bacteria, while using steam technology to reduce wrinkles and odors
WASHER LINK ­ Wirelessly link your washer to your dryer so you only have to choose a setting once
ADAPTIVE MySettings ­ Through AI Learning, the washer and dryer can personalize your cycle selections automatically
SMART FEATURES POWERED BY SMARTHQTM ­ Start, stop and monitor your laundry from anywhere while receiving real-time notifications and updates
STAINLESS STEEL DRUM ­ Enjoy premium durability with a drum that resists rust and helps protect clothes
WRINKLE CARE ­ Prevents wrinkles by extending the tumble without heat
REDUCE STATIC ­ Prevent static cling with a gentle mist near the end of the cycle
QUICK DRY ­ This cycle quickly dries individual items and small loads, making it perfect for families on the go
DAMP ALERT ­ Signals when clothes reach the ideal dampness level for ironing or air drying
STEAM CYCLES ­ Refresh small loads and de-wrinkle larger loads with the power of steam
CHECK VENT NOTIFICATION ­ Receive a notification when the dryer vent needs to be cleaned, ensuring safe operation and optimal drying performance
CONVENIENT 4-WAY VENTING ­ Flexible venting options allow venting from the front, rear or either side
ENERGY STAR®-QUALIFIED ­ Meets or exceeds federal guidelines for energy efficiency
MODEL PFD95ESPWGN ­ Jade Green MODEL PFD95ESPWDS ­ Carbon Graphite

4-Way Venting Option

For answers to your Monogram, CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Product Specification Created 6/24

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>