SOLIGHT WM-30W-RE LED spotlight Owner’s Manual

SOLIGHT WM-30W-RE LED spotlight

Product Information

Specifications:

• Luminous flux: 3000lm*
• Power: 30W
• Chromaticity temperature: 4000K
• Light source: 60x LED SMD2835
• Batteries: Li-Ion (6600mAh, 3.7V)
• Battery life: min. 2h/max. 10h
• Battery charging time: about 6h
• LED lifetime: 20,000 hours
• Protection: IP54

Description of Equipment:

1. Spotlight
2. Handle
3. LED panel
4. Stand
5. USB-C charging cable
6. Wing nut for fixing the tilt
7. Charging indicator
8. Battery status button
9. USB-C socket cover
10. ON/OFF button
11. USB-C charging socket

Safety Notice:
Positioning of the Reflector:
You can adjust the position of the device vertically and horizontally. Follow the instructions in the manual for proper positioning.

Operation of Equipment:
The device can be operated in different modes by pressing the ON/OFF button. Follow the manual for mode selection.

Maintenance and Storage:
For cleaning, use a dry, lint-free cloth. Store the device in a dry place inside its packaging when not in use. Follow the manual for battery maintenance.

FAQ (Frequently Asked Questions):

1. Q: Can the light source be replaced?
   A: The light source of this luminaire is non-replaceable. The entire luminaire must be replaced at the end of its service life.

2. Q: How often should I charge the device to maintain battery capacity?
   A: The device needs to be charged for two hours every 4 months to maintain the capacity of the rechargeable battery.

Thank you for purchasing our portable LED spotlight. Please read this manual carefully and heed the safety warnings and instructions before installing, using or repairing the unit. Doing so will ensure not only the protection of persons, but also the longevity of the equipment.

TECHNICAL PARAMETERS

• maximum luminous flux is achieved at full charge

DESCRIPTION OF EQUIPMENT

1. Spotlight
2. Handle
3. LED panel
4. LED panel
5. Stand
6. USB-C charging cable
7. Wing nut for fixing the tilt
8. Charging indicator
9. Battery status button
10. USB-C socket cover
11. ON/OFF button
12. USB-C charging socket

SAFETY NOTICE

• Fully charge the batteries before starting the device for the first time.
• The device is not intended for children.
• If the device is damaged, do not continue to use it.
• Neither the manufacturer nor the distributor shall be liable for any damage caused by improper use of the product.
• Do not repair or modify the equipment, all repairs must only be carried out by the manufacturer’s service centre.
• Do not open the cover or otherwise interfere with the construction of the product.
• Keep the device away from: open flames, hot surfaces and flammable materials.
• Place the device at least 0.1m from the object to be illuminated.
• Do not cover/uncover the product while charging, as this creates a risk of overheating.
• Keep the batteries out of the reach of children.
• The battery is not replaceable, in the event of a failure the entire device must be disposed of at a designated location.

POSITIONING OF THE REFLECTOR

You can adjust the position of the device vertically and horizontally.

1. Using the handle (2), place the product on a flat and stable surface.
2. Fold out LED panels (3)
3. When the desired position is reached, tighten the screws to secure the rotation.

Tighten the pivot screws when the adjustment is complete.

OPERATION OF EQUIPMENT
The device can be operated in different modes. These can be selected by repeatedly pressing the ON/OFF button (11). 1. Press: 100% illumination | 2. Press: 50% illumination | 3. Press: 20% illumination | 4. Off.

Charging:
Open the cover (10) of the USB-C charging socket and connect the supplied charging cable to the socket (12). Connect the charging cable to a 5V, max. 2A AC adapter (not included) and plug it into a power outlet.
(It is not possible to switch on the reflector while it is charging. Always charge in a dry place.)
When charging, all the indicator lights (8) start flashing. The battery is fully charged when all lights are on continuously.

NOTE:
After charging is complete, be sure to reattach the USB input cover (10) to protect the reflector from moisture and to ensure protection against splashing water.

Switching On/Off:
Press the ON/OFF button (11) to switch the device on/off.

Maintenance and storage:
Do not use chemicals for cleaning. Use a dry, lint-free cloth. Clean only when the product is switched off and disconnected.
When not in use, store the device in a dry place inside its packaging.
To maintain the capacity of the rechargeable battery, the device needs to be charged for two hours every 4 months.
The light source of this luminaire is non-replaceable, at the end of its service life the entire luminaire must be replaced and disposed of in a designated place. This product contains a light source that for design reasons cannot be removed for verification and therefore the entire product is considered a light source.

Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Czech Republic.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>