tp-Link TL-WPA7817 KIT Gigabit Powerline Installation Guide

August 24, 2024
tp-link

tp-Link TL-WPA7817 KIT Gigabit Powerline Installation Guide

Plug and Play

  • TL-WPA7817 KIT (European version) is used for demonstration in this guide.

Attention

Unify Your Wi-Fi Networks

Copy SSID and password from your router via any of the methods below to create one unified Wi-Fi network throughout your home.

Note: If your router doesn’t support the two methods below, refer to Personalize Your Networks section to manually change the extender’s Wi-Fi settings.

Create a Secure Powerline Network by Pairing

Note: You can only pair two devices at a time. We recommend that you plug in the powerline devices near each other when pairing.

Sync Wi-Fi Settings to More Extenders

If you have more extenders, simply plug in and pair each one with the existing adapter to join the network. Then the Wi-Fi settings will automatically sync from the existing extender to the new ones.

Personalize Your Networks

Manage your powerline devices using any of the methods below. You can change the SSID and password, set Wi-Fi schedules, create a guest network and more

tpPLC App
For easy management via your smartphone or tablet, download the app from Apple App Store or Google Play, or simply scan the QR code.

tpPLC Utility

For easy management via your computer, download the utility at
https://www.tp-link.com/support/download/.
Note: For detailed instructions, refer to the utility manual on the product’s Support page.
Web Interface
To access all settings, connect to an extender wirelessly and visit http://tplinkplc.net.

Note: For detailed instructions, refer to the product manual on the product’s Support page.

EasyMesh-Compatible

You can experience strong, stable, and seamless wireless connections throughout your home with EasyMesh, a whole home mesh standard that works across different access points for ultimate flexibility.

  • Seamless Roaming
    Connects mobile devices to your routers or extenders that provide the best coverage.
    Devices compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.

  • Easy Setup and Management
    Easily set up and manage a unified Mesh network.

  • Flexible Scalability
    Flexibly scale your home networking with different vendors,* different topologies, different Protocols and different product categories.

*TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed connections may be due to firmware conflicts of different vendors.
The EasyMesh-Compatible function is still being developed on some models and will be supported in subsequent software updates. This product is compatible with standardized EasyMesh technology but has not obtained the Wi-Fi EasyMesh certification.
For more information, visit https://www.tp-link.com/easymesh/.

LEDs & Buttons

Frequently Asked Questions

Q1. How do I reset my adapter and extender to factory default settings?
A. Press and hold the Pair button for at least 6 seconds. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is complete.

Q2. What should I do if the Powerline LED is off?
Al . Try another wall socket and make sure all powerline devices are on the same service panel.
A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.
A3. If the problem persists, contact our Technical Support.

Q3. What should I do if there is no internet connection in my powerline network?
Al . Make sure all powerline adapters and extenders are on the same service panel.
A2. Make sure the Powerline L EDS are lit on all of your powerline devices. If they are not, pair all devices again.
A3. Make sure all devices are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the modem or router.

Q4. What should I do if a successfully-paired extender does not reconnect after it is relocated?
Al . Make sure all powerline adapters and extenders are on the same service panel.
A2. Try to pair the extender again, and make sure the Powerline LED is on.
A3. Check for pcssible interference due to a washing machine, air conditioner or other household appliances that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical socket to remove the electrical noise if your powerline device has an integrated electrical socket.

For technical support, replacement services, user guides, and other information, @
please visit https://www.tp-link.com/support, or simply scan the QR code.
To communicate with TP-Link users or engineers, please join the TP-Link
13 Community at https://community.tp-link.com.
TP-Link hereby dedares that the device is in compliance with the essential requirements and other relevant provsions of d irectives 2014/53/EU, 2009/1 25/EC, 2011/65/EU and (EU)201 5/863.
The original EU Declaration of Conformity may be found at https•//vwvw.tp- link.com/en/support/ce/
TP-Link hereby dedares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://wwvv.tp- link.com/support/ukca/

Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
  • Do not use the device where wireless devices are not allowed.
  • Plug the powerline devices directly into the wall outlets but not the power strips.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals