Renowatt MTN-94181 Portable Power Station User Manual
- August 21, 2024
- Renowatt
Table of Contents
USER MANUAL
MTN-94181 Portable Power Station
CHARGE FIRST! Before using your new power station, plug it into a suitable
power outlet until it is fully charged.
Then you can start your exciting journey with it.
FAQs
1. What type of battery is in an Power Station?
Contains a battery pack which consists of an array of cylindrical Lithium-ion battery cells with high energy density.
2. How do I know if my Power Station is charged?
To Check the charge level of the, refer to the LCD battery Display.
3. Can I charge the while supplyiing power at the same time?
The power station could power the devices while recharging itself.
4. How do I know if my device will work with the ?
You will need to check the amount of power your device requires. This may require some research on your end. An online search or examining the user guide for your device should suffice. To be compatible with the you should use devices that require less than 400W.
WHAT’S IN THE BOX
CHARGING
This is some common devices (within 400W)
| Car Fridge (60W)
Around 5.4 Hours| | Phone (4000mAh)
Around 27 Recharges| | Refrigerator (120W)
Around 2.7 Hours
---|---|---|---|---|---
| Projector (100W)
Around 3.2 Hours| | Drone (40W)
Around 8 Recharges| | Rice cooker (330W)
Around 1.0 Hours
| Camping light (125W)
Around 2.6 Hours| | Photography lights (300W)
Around 1.1 Hours| | Electric fan (45W)
Around 7.2 Hours
| Macbook 12
Around 5 Recharges| | Camera (16W)
Around 20 Recharges| |
RECHARGEMENT
Before using or storage,plug your Power Station into the wall plug until it is
fully charged.
If the LCD shows less than 20% capacity, plug it into a power source, like an
AC outlet or a solar panel, as soon as possible.
There are four ways to recharge your Power Station:
*DC 5.52.5mm Input**
| Wall Charger (120WAround 4 Hours
---|---
| Car Charger (120W)
Around 4 Hours
| 100W Solar Panels(Optional) Around 5.5 Hours
(Depending on Weather
Type-C Input
| Type-C Wall Charger ( PD 60W)
Around 8 Hours
---|---
DC input and Type-C input Simultaneously (180W)
Around 3 hours
SPECIFICATIONS
Output
AC output| Rated voltage| 230V
Rated power| 400W
Peak power| 800W
Frequency| 50Hz
DC2 Output| Rated voltage| 13.3V
Rated current| 10A
DC Output Ciger Socket| Rated voltage| 13.3V
Rated current| 10A
USB-A3 Output| Rated voltage| 5V
Rated current| 2.4A
USB-C1 Output| PD: 60W Max| 5V3A, 9V3A,12V3A,15V3A,20V3A
Floodlight| Lux| 200 Low / 800 Middle / 1400 high
Input
DC Input| Rated voltage| 12V-24V(0-10A)
Rated power| Max 120W
USB-C1 Input| PD: 60W Max| 5V3A, 9V3A,12V3A,15V3A,20V3A
DC input and USB-C1 input at the same time to recharge the power station, the
input power can be up to 180W max
Battery
Rated capacity| 320Wh
Battery cell type| Lithium-ion
General
Working environment condition| Relative humidity: 20%-90%
Temperature: 32-104°F (-10-40°C)
Size| 237.2195.2*190.6mm±5mm
ATTENTION
| Not permitted on aircrafts.| | To preserve the battery lifespan,
please use and recharge at least once
every 6 months.
---|---|---|---
| Use original or certified charger
and cables.| | Avoid extreme temperature
| Avoid Dropping| | Do not disassemble
| It’s not waterproof, do not expose
to liquids.| | Please dispose of batteries and electronic goods in accordance
with local regulations.
DISCLAIMER
Our company cannot be held liable for damages caused by fire, earthquake, use
by a third party , other accidents, intentional misconduct on the part of the
customer, abuse or other abnormal conditions.
Do not repair any damage to the AC plug or power supply on your own.
The warranty covers all terms and conditions of the warranty. Contents that
are not specified in the warranty terms and conditions are beyond our
responsibility.
Our company assumes no liability for damaged caused by incorrect use or non-
compiance with this instruction manual.
Intended use: The power station unit is intended as a power supply for
electronic devices with a maximum power comsumption of 400W. Our product is
not suitable to be used with equipment that relates to one’s own personal
safety and relies heavily on electricity, such as medical devices, equipment
for nuclear faciliites, the manufacture of air and spacecraft, etc. We
therefore asssume no liability for accidents involving personal safety, fires,
or machine failures, caused by usinig our product with the aforementioned
devices.
WARRANTY
Limited Warranty
Our company warrants to the original comsumer purchaser that the our company
product will be free from defects in workmanship and material under normal
consumer use during the applicable warranty period identified in the ”
Warranty Period” section below, subject to the exclusions set forth below.
This warranty statement sets forth our total and exclusive warranty
obligation. We will not assume, nor authorize any person to assume for us, any
other liability in connection with the sale of our products.
Warranty Period
The warranty period is 12 months. In each case, the warranty period is
measured starting on the date of purchase by the original cunsumer purchaser.
The sales receipt from the first consumer purchase, or other reasonable
documentary proof, is required in order to establish the start date of the
warranty period.
Remedy
Our company will repair or replace (at our option) any our company product
that fails to operate during the applicable warranty period due to defect in
workmanship or material. If a valid claim is made during the applicable
period, our company, at its option, will either(1)replace the product, or (2)
exchange the product with a product that is of equal value. A
replacement product assumes the remaining warranty of the original product or
180 days from the date of replacement, whichever is greater. Coustomer is
responsible for the return shipping costs.
Limited to Original Consumer Buyer
The warranty on our product is limited to the original consumer purchaser and
to any subsequent owner.
Exclusions
Our warranty does not apply to (i) any product that is misused, abused,
modified,damaged by accident, or used for anything other than normal consumer
use as authorized in our current product literature, or (ii) any product
purchased through an online auction house. our warranty does not apply to the
battery cell unless the battery cell is fully charged by you within seven days
after you purchase the product and at least every 6 months thereafter.
How to Receive Service
To abtain warranty service, contact our customer service team The information
contained herein is subject to change without notice. The only warranties for
our company products and services are set forth in the warranty statements
accompanying such products and services. our company shall not be liable for
technical or editorial errors or omissions contained herein.This user guide
describes features that are common to most models.
POWER
LCD Screen Button
Press the LCD button to check the remaining battery.
AC Button/DC 12V Button/USB Button
Turn on each output by pressing its power button before charging your device
as it does not output automatically.
Turn off each output by pressing its power button as it does not tum off
automatically or it will drain the battery out.
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Read the following instructions to ensure safe usage
DANGER
Noncompliance may very likely lead to serious injury or death
DO NOT disassemble,repair or modify the unit or the battery.
DO NOT place the unit close to or in a fire or expose it to heat. Keep out of
direct sunlight.
DO NOT charge,use or store the unit in a bathroom or in an area exposed to
rain or moisture
Only use the output socket to power external devices. Never connect the output
to mains power under any circumstances.
DO NOT touch the unit or the plug-in points if your hands are wet.
DO NOT connect any metallic objects to the AC input or output.
DO NOT rub your eyes if fluid from inside the unit should get in your eyes.
DO NOT use any inappropriate power cords.
DO NOT operate the unit above the specified input voltage.
DO NOT use the unit if it is not functioning correctly.
DO NOT move the unit if it is reharging or in use.
DO NOT put fingers or hands into the product.
DO NOT use a battery pack or appliance that is damaged or modified. Damaged or
modified batteries may exhibit unpredicable behavior resulting in fire,
explosion or risk of injury.
DO NOT disassemble the power pack, take it to aqualified service person when
service or repair is required.
Incorrect reassembly may result in a risk of fire or electric shock.
WARNING
Noncompliance may lead to serious injury or death
Use and store the unit only i a clean and dry environment. DO NOT use and
store in dusty and wet environment.
Check the unit prior to every use. DO NOT use the unit if it is damaged,
broken.
DO NOT use the unit if the power cord is damaged or broken.
Keep the unit away from childred. DNO NOT let childred use the poewr supply
unit.
Keep this product away from pets.
DO NOT use or store the unit in an area or environment with high temperature.
Should fluid from inside of the unit come in contact with your skin or
clothing, wash the affected areas with tap water.
In a storm,unplug the power cord from the socket.
DO NOT charge the unit via power supply systems that operate outside of
100-240V.
DO NOT place the unit on its side or upside down while in use or storage.
DO NOT use accessories for other usage.
WARNING – RISK OF EXPLOSIVE GASES
To reduce risk of battery explosion, follow these instructions and those
published by battery manufacturer and manufacturer of any equipment you intend
to use in vicinity of the battery. Review cautionary marking on these products
and on engine.
LCD
Power Level Percentage
Check the battery level by pressing the display button before using. If
battery is at a low level, charge first.
Power of Input & Output (W)
If the Power Station total output exceeds 400W, it will automatically shut
off.
Please ensure the power consumption is less than 400W, then press the power
button.
Low & High Temperature Alarm
The can power your devices at temperature sranging from -10~40°C(14~104°F).
If your working temperature is outside this range, the power station may stop
working.
Warning symbol
: Input overvoltage protection
The symbol flashes for 5 seconds and then turn off the input. When input
overvoltage protection is released, the symbol will not display again.
: Output overload protection
The symbol flashes for 5 seconds and then turns off the output.
The symbol will not be displayed when the overload is removed.
: Lower Power Alarming
This symbol flashes to indicate that the product is in a low power state,
power less than 3%.
: Low temperature alarming
When this symbol display, please stop charging or discharging this power
station immediately to avoid damaging.
: High temperature alarming
When this symbol display, please stop charging or discharging this power
station immediately to avoid damaging.
LED FLASHLIGHT
Short press the button: weak light – bright light – strong light – turn off
cycle in turn.
Double click the button to turn on SOS function and press the button again to
turn off the lighting.
PERSONAL PRECAUTIONS
- NEVER smoke or allow a spark or flame in vicinity of battery
- Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical part that may cause explosion.
- DO NOT expose a power pack to fire or excessive temperature. Exposure fire or temperature above 130℃ may cause explosion.
CAUTION
Noncompliance may lead to inuries and /or property damage.
If rust, peculiar odors, overheating or other abnormal circumstances are
observed, stop using the unit immediately and contact the dealer or our
customer service center.
The unit complies with all legal requirements for transport of dangerous
goods.
Make sure that the unint is properly secured when transporting it in a motor
vehicle.
Only charge, use and store the unit within an ambient temperature of 0 to 40
(32 – 104F)
Switch the unit off immediately if it has ccidentally fallen, was dropped or
was exposed to vibrations.
Carefully read the instructions for the electric devices that you intend to
connect to your power supply unit.
Make sure that the device you are connecting is switched off before you
connect it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>