Genius KM-8216 Keyboard and Mouse Smart

1. Remove the battery cover from the mouse. Install one AA battery into the mouse.
2. Remove the battery cover from the keyboard. Install two AAA batteries into the keyboard.
3. Plug the receiver into your computer.
4. Connect both devices, wait 5-10 seconds and you are ready to begin.

Mouse Button Assignments

1. Left Button: Provides traditional mouse functions like click, double click, and drag.
2. Magic-Roller: Scroll the button to surf the Internet and Windows documents.
3. Right Button: Provides traditional mouse right-click function
4. DPI Switch: 800 / 1200 (default) / 1600.
5. AI Copilot: Assistant on Windows 11 or above
6. Enable voice typing: on Windows 11 or above.

CAUTIONS FOR BATTERY REPLACEMENT

Replace Batteries
If the mouse or keyboard does not work properly, then the batteries have lost their charge, so you need to replace them.

Warning
Do not mix or use different types of batteries at the same time.

Notes on Battery Usage
When you use the battery, carefully read and strictly observe the Safety

Instructions and notes are described below

• Different battery types and surrounding temperatures may affect the battery’s performance.
• Avoid using batteries in extremely cold environments as low temperatures can shorten the
• Battery life and reduced wireless device performance.
• If you are using a new rechargeable battery or rechargeable battery that has not been used for an extended period (batteries that pass the expiry date are exceptions) it might affect the period according to local regulations.
• You can use this device. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them at least one complete cycle before use.
• The battery or wireless device may feel warm when used for an extended period.
• This is normal and not a malfunction.
• If you will not be using the batteries for an extended period, remove them from the wireless device to prevent leakage or corrosion.
• Always keep the terminals in a clean state.
• Risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to local regulations.

Hardware Installation

1. Install one AA battery into the mouse and two AAA batteries into the keyboard.
2. The receiver from the mouse and plug it into a USB port on your PC.

Replace batteries
If the mouse or keyboard does not work properly, then the batteries have lost their charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same time.

Hotkeys

Function keys

Federal Communication Commission interference statement
This equipment has been tested and found to comply with the limits of a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

• Reorient / Relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

FCC CAUTION
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Disclaimer
The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties concerning this documentation, whether expressed or implied. All material is provided “as is”. This includes but is not limited to, any implied warranties of merchantability and fitness for a particular purpose. The information covered in this document is subject to change without notice. KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies. Copyright©KYE Systems Corp. All rights reserved.

Declaration of Conformity
The following designated product: M/N: KM-8216
is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to the Radio Equipment Directive (2014 / 53 / EU). For the evaluation regarding the electromagnetic compatibility, the following standards were applied :

EN 300 328 / EN 301 489-1 / EN 301 489-17 / EN 62479 / EN 62368-1
This declaration is prepared for the manufacturer: KYE SYSTEMS CORP.
No. 492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 241017, Taiwan (R.O.C.)

KYE Systems Corp

492, Sec. 5, Chongxin Rd., Sanchong Dist.,

New Taipei City 241017, Taiwan
Tel: 886-2-2995-6645
Fax: 886-2-2995-6649
Email: support@geniusnet.com.tw
http://www.geniusnet.com

KYE SYSTEMS CORP.

492, Sec. 5, Chongxin Rd., Sanchong Dist.,

New Taipei City 241017, Taiwan
Ricky Chen
QADV Department
KYE SYSTEMS CORP

The frequency band of the product is 2400 MHz ~ 2483.5 MHz and the radio- frequency transmitted maximum power (equivalent isotropic radiated power, EIRP) is less than 10 mW.
Operating temperature : 0 ~ 40℃

References

• Genius designs personal peripheral devices with a target to provide a better experience in everyone's lives. Visit Genius to find your devices with high quality, easy usage and effective cost.
• Каталог декларацій відповідності MTI
• Genius Support - Register your device, download driver and apps and choose product support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>