Steinbach CP40MN Heat Pump Silent Mini Installation Guide

Steinbach CP40MN Heat Pump Silent Mini

Product Information

Specifications

• Model / Article Number: CP40MN / 049310
• Protection Class: IPX4
• Power Supply: 220-240V~ / 50Hz
• Heating Input Power: 600 W
• Heating Input Current: 2.8 A
• Heating Power: 4,000 W
• Frequency: 2.483 MHz
• Effective Radiation Power ERP: 20 dBM

Product Usage Instructions

General Safety Instructions

Read the quick installation guide and the operating manual carefully. Products marked with the symbol conform to protection class I. Follow all safety warnings to avoid electric shock or other hazards.

Installation Process

1. Prepare the setup location as shown in Figure (A) of the manual.
2.  Follow the installation steps provided in figure (B) of themanual.

Operating the Device

Ensure you have read and understood the operating manual before using the device. The heat pump is designed for heating or cooling privately used swimming pools. Use the device according to the instructions to avoid injuries or damage.

Disposal of Packaging

Dispose of the packaging materials properly by separating cardboard and plastic for recycling.

FAQs

What is the intended use of the heat pump?

The heat pump is exclusively designed for heating or cooling privately used swimming pools as per the operating manual.

What should I do in case of electric shock risk?

Follow all safety warnings provided in the manual to avoid any hazards related to electric shock.

How do I register my product online?

You can register your product online by scanning the QR code provided in the manual.

WE ARE POOL

• At Steinbach, we love everything to do with pools and you can feel this enthusiasm in every product in our extensive range. Whether pools, filtersystems, water care products, pool accessories, pool heaters, pool covers,solar showers or inflatable fun products: Only with Steinbach‘s broad product portfolio can summer become summer.
• Subscribe to the newsletter now and never miss any news!

RECOMMENDED ACCESSORIES Bypass Set

• 060045
• High-quality plastic
• Suitable for swimming pool hoses Ø 32/38 mm
• Complete set including hose clamps

Swimming pool hose

• 060005 / 060015
• Suitable for chlorine and saltwater
• Suitable for all swimming pools with hose connection Ø 32 mm / 38 mm
• Lugged, reinforced ends

You can find further accessories on our website:
www.steinbach-group.com

• DOWNLOADS AND FURTHER LINKS
  More detailed information and details on this heat pump can be found under the following QR code:
  INSTRUCTION MANUAL

ONLINE-REGISTRATION

• Register your product online by scanning the QR code below and enjoy all the benefits
  PRODUCT-REGISTRATION

PACKAGE CONTENTS

• Heat pump
• Hose connector (2x)

GENERAL

Reading the operating manual
This quick installation guide is for Steinbach heat pump „Silent mini“ – hereinafter referred to as „device“ or „heat pump“ Read the manual, especially the safety instructions, carefully before using the device. Failure to comply may result in serious injuries or damageto the device.
Intended use
This device is exclusively designed for heating or cooling privately used swimming pools according to this operating manual. The user is responsible for any misuse.

EXPLANATION OF SYMBOLS

The following symbols are used in this quick guide, the user manual (see QR code), on the device, or on the packaging

SAFETY

The following signal words are used in this quick installation guide:

Warning! This signal symbol/word denotes a hazard with a moderate risk level that, if not avoided, could result in death or serious injury.

General safety instructions

Warning! Risk of fire and explosion
The device‘s refrigerant circuit contains easily flammable, odorless gas. Uncontrolled leakage of refrigerant poses a fire and explosion hazard.

• Operate the device exclusively outdoors
• Keep heat sources and open flames, as well as ignition sources, away from the heat pump
• Store the device in a well-ventilated place

Warning! Risk of electric shock!

• Connect the heat pump only to sockets protected by a 30mA residual current device (RCD/FI switch).
• Do not operate the heat pump if it shows visible damage, if there are people inside the pool or if the power cable or plug is defective.
• Never pull the plug out of the socket by pulling on the power cable; always grip the plug.

SETUP AND INSTALLATION

Preparing the setup location

• Follow the minimum distances (e.g.: to adjacent buildings) according to Figure (A) with a minimum distance of 2500 mm on the air outlet side of the heat pump.
• Place the device on a level, load-bearing surface.

Integrate the device into the water circuit

• Follow the assembly diagram according to Figure (B).
• Connect the hoses for water inlet and outlet with the supplied adapters according to Figure (C).
• Color coding on the device: Blue = inlet (from the pool) / Red = outlet (to the pool)
• Recommended additional material: Steinbach By-Pass Set (Art.# 060045) and swimming pool hoses Ø32 or Ø38mm as needed.

Establish the power supply

• The device must be connected to a circuit protected by an RCD switch (FIswitch) with a 30mA tripping current.
• Power consumption: see the nameplate of the heat pump

DISPLAY

Display: controls and indicators as per figure (D)

1. Display Cooling mode
2. Display Heating mode
3. Display Wifi
4. Display Water inlet temperature
5. Button ON/OFF
6. Button Operating mode
7. Button Control/Navigation UP
8. Button Control/Navigation DOWN

ACTIVATING THE HEATING OPERATING MODE

1. Turn on the filter system – the heat pump requires sufficient water flow (>
   1,000 l/h) to operate

2. Press and hold button 5 (ON/OFF) for 2s to switch on the heat pump

3. Press and hold buttons 7 (Control/Navigation DOWN) and 8 (Control/
   Navigation UP) for 3s to unlock the keypad

4.  Press and hold button 6 (Operating mode) to switch between “heating” and “cooling” mode

5.  Adjust the desired temperature using buttons 7 and 8 (Control/ Navigation)

6.  The heat pump starts when the inlet temperature (display 4) is lower than the set target temperature

7. Press and hold the buttons 6 (Operating mode), 7 and 8 (Control/Navigation) to switch the temperature from °F to °C

8. After 1 minute, the keypad is locked. Press and hold the buttons 7 and 8(Control/Navigation) for 3s to unlock the keypad

9. If the error code „Err 03“ appears on the display, the water flow through the heat pump is too low. For troubleshooting, refer to the detailed manual – see QR code below

TECHNICAL DATA

DECLARATION OF CONFORMITY

Hereby, Steinbach International GmbH declares that the radio equipment type heat pump Silent Mini (049310) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.steinbach-group.com Transmission frequency: 2.483 MHz
Effective radiant power: 20 dBM

WASTE DISPOSAL

• Dispose of packaging
  disposed of the packaging according to type. Dispose of cardboard and cardboard with the waste paper and film in the recycling collection.

• Dispose of old appliances
  Old appliances must not be disposed of with household waste! If the appliance can no longer be used, every consumer is legally obliged to dispose of old appliances separately from household waste, e.g. at a collection point in their municipality/neighborhood. This ensures that old appliances are properly recycled and negative effects on the environment are avoided. This is why electrical appliances are labeled with the symbol above.

• Dispose of refrigerant
  The appliance contains refrigerant. Refrigerants must be disposed of properly as hazardous substances at an authorized collection point.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>