Steinbach 11538 Combo Valve Instruction Manual
- October 27, 2023
- Steinbach
Table of Contents
Steinbach 11538 Combo Valve Instruction Manual
Inflate
1a. Remove the valve cap
of the check valve bracket and push the valve bracket firmly into the deflation outlet.
1b. If the valve bracket
anti-return is already inserted into the deflation outlet, pull on the valve
cap.
2. Insert the pump hose compressor.
CAUTION: In order to avoid risk free, do not use or the nozzle.
3. Replace the cap firmly.
Deflate 1.
Remove the valve cap.
2. Remove the valve bracket backflow preventer to release air.
3. Replace the valve bracket firmly. anti-return and plug
Bloating 1a.
Remove the valve cap the valve chamber and press the valve chamber into the valve opening. 1b.
If the valve chamber already pressed into the valve chamber, pull the valve cap to open.
2. Insert the pump hose or nozzle into the hole.
CAUTION: Do not use a high pressure pump or compressor as you risk the product exploding.
3. Then fit the valve chamber and the valve cap back in.
Exclusion of air 1.
Pull out the valve cap.
2. Pull out the valve chamber to vent the air.
3. Then fit the valve chamber and the valve cap back in.
How to inflate
1a.Firmly insert the valve housing into the exhaust port with the valve cap
separated from the valve housing. 1b.If the valve housing is already inside
the exhaust port, just pull off the valve cap. 2. Insert the hose or nozzle of
the pump
CAUTION: To prevent the product from exploding, do not use a high pressure pump such as a compressor. 3. Put the cap back on firmly. Bleed air
- Pull out the
valve cap. 2. Remove valve and housing to remove air. 3. Replace the valve and housing and close the cap firmly.
©2021 Intex Marketing Ltd. – Intex Development Co.Ltd. – Intex Recreation Corp. All rights
Read More About This Manual & Download PDF: