Vinsetto 921-272 Massage Office Chair Instruction Manual
- August 19, 2024
- Vinsetto
Table of Contents
Vinsetto 921-272 Massage Office Chair
Product Specifications
- Input voltage : 100-240 V
- Input AC frequency : 50-60 Hz
- Output voltage : 12 V
- Output current : 0.6 A
- Output power : 7.2 W
- Average active efficiency : 85%
- Efficiency at low load (10%) : 72.73%
- No-load power consumption : 0.104 W
Product Usage Instructions
Power Connection
Ensure the input voltage of the product matches the power supply in the
range of 100-240 V. Connect the power cable to the designated power source.
Device Setup
Connect the device to the output voltage of 12 V using the appropriate
connectors. Make sure the device is properly connected and secured.
Operation
Turn on the device using the power button or switch. Adjust settings as
needed based on the product functionality.
Safety Precautions
Follow all safety guidelines provided in the user manual to prevent any
hazards or misuse of the product. Ensure proper ventilation and avoid water
contact.
IMPORTANT, RETAIN FOR FUTURE REFERENCE : READ CAREFULLY
SAFETY INFORMATION
- The intended use:This product is intended for indoor use only. Used for work and study.
- Maximum weight : 120 KG
- To prevent the chair falling, make sure that the weight is evenly distributed.
- Remove all parts from the box and make sure all parts are included before assembly.
- Keep your feet always on the floor and do not press your head on the headrest when you recline the chair.
- When you adjust the backrest, make sure your fingers are safe and out of harm’s way.
- To avoid damage, never pull fast and strongly in your house.
- This chair is designed to sit only and nothing else.
- Don’t use it as a base or as a ladder.
- Don’t sit in the arms of the chair.
- This chair is designed to seat only one person at same time.
- If some parts are missing, damaged or worn, stop using it immediately.
- Avoid direct sunlight on the chair so that the plastic components won’t become brittle.
Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
MAINTENANCE INSTRUCTIONS
- Clean with vacuum cleaner.
- Wipe with a fabric dampened with water.
Parts
Hardware
Assembly Instructions
FUNCTIONAL DESCRIPTION OF MASSAGER
Graphic presentation of Controller
- POWER : turn on/off selection key
- INTENSITY : high/low selection key.
- MODE : working mode selection key
- BACK : back massage function selection key
- LUMBAR : lumbar massage function selection key
- THIGH : thigh massage function selection key
- TIMER : set working time key
Operating Instructions
- Insert the power into the DC socket
- Press the POWER key to start the unit
- Press the TIMER key, and the unit’s control time will switch between 15min, 30min, and 60min.
- Press the MODE key to select different working modes(PULSE, PRESS, WAVE, AUTO, NORMAL)
- Press the INTENSITY key to switch the intensity of the vibration.
- Press the BACK LUMBAR and THIGH keys to massage the different places of the body
If you have any questions, please contact our customer care center, Our
contact details are below
001-877-644-9366
customerservice@aosom.com Imported by
Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
If you have any questions, please contact our customer care center, Our
contact details are below
416-792-6088
customerservice@aosom.ca Imported by Aosom
Canada Inc. 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
MADE IN CHINA
Frequently Asked Questions
Q: What should I do if the device does not power on?
A: Check the power connection, ensure the input voltage is correct, and
verify that the device is properly set up and turned on.
Q: How can I adjust the settings of the device?
A: Refer to the user manual for specific instructions on adjusting settings
and operating the device efficiently.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>