Vinsetto 921-539V80 High Back Massage Office Chair Instruction Manual
- August 10, 2024
- Vinsetto
Table of Contents
Vinsetto 921-539V80 High Back Massage Office Chair
Specifications :
- Input voltage: 100-240 V
- Input AC frequency: 50/60 Hz
- Output voltage: 12 V
- Output current: 0.6 A
- Output power: 7.2 W
- Average active efficiency: 85%
- Efficiency at low load (10%): 76.58-72.73%
- No-load power consumption: 0.074-0.104 W
Product Usage Instructions
Assembly Instructions:
- Identify all the components listed in the manual.
- Follow the step-by-step assembly guide provided.
- Ensure not to confuse similar screws during assembly.
- Do not tighten bolts fully until all parts are connected.
Power On Instructions:
- Connect the power adapter to a suitable power outlet.
- Ensure the input voltage matches the required range (100-240V).
- Power on the device using the designated power switch.
Operating Instructions:
- Use the provided buttons or controls to navigate through different modes or settings.
- Refer to the user manual for specific instructions on each operating mode.
- Adjust settings as needed to suit your preferences or requirements.
FAQ :
Q: What should I do if the device is not powering on?
A: Check the power outlet, ensure the input voltage is correct, and verify all connections before contacting customer support.
Q: How do I clean the product?
A: Use a soft, dry cloth to gently wipe the surfaces of the product. Avoid using harsh chemicals or abrasive materials.
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
SAFETY INFORMATION
- The intended use:This product is intended for indoor use only. Used for work and study.
- Maximum weight: 120 KG
- To prevent the chair falling, make sure that the weight is evenly distributed.
- Remove all parts from the box and make sure all parts are included before assembly.
- Keep your feet always on the floor and do not press your head on the headrest when you recline the chair.
- When you adjust the backrest, make sure your fingers are safe and out of harm’s way.
- To avoid damage, never pull fast and strongly in your house.
- This chair is designed to sit only and nothing else.
- Don’t use it as a base or as a ladder.
- Don’t sit in the arms of the chair.
- This chair is designed to seat only one person at same time.
- If some parts are missing, damaged or worn, stop using it immediately.
- Avoid direct sunlight on the chair so that the plastic components won’t become brittle. Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
MAINTENANCE INSTRUCTIONS
- Clean with vacuum cleaner.
- Wipe with a fabric dampened with water.
PARTS
HARDWARE
NOTE
Do not confuse similar screws.Do not tighten bolts fully until all parts are connected!
INSTALLATION INSTRUCTION
SPECIFICATION
| Input voltage | 100-240 | V |
|---|---|---|
| Input AC frequency | 50/60 | Hz |
| Output voltage | 12 | V |
| Output current | 0.6 | A |
| Output power | 7.2 | W |
| Average active efficiency | 85 | % |
| Efficiency at low load (10 %) | 76.58-72.73 | % |
| No-load power consumption | 0.074-0.104 | W |
FUNCTIONAL DESCRIPTION OF MASSAGER
Graphic presentation of Controller
- POWER: turn on/off selection key
- INTENSITY: high/low selection key.
- MODE: working mode selection key
- BACK: back massage function selection key
- LUMBAR: lumbar massage function selection key
- THIGH: thigh massage function selection key
- LEG: leg massage function selection key
Operating Instructions
- Insert the power into the DC socket
- Press the POWER key to start the unit
- Press the MODE key to select different working modes(PULSE,PRESS,WAVE, AUTO,NORMAL)
- Press the INTENSITY key to switch the intensity of vibration.
- Press the BACK, LUMBAR ,LEG and THIGH key to massage the different places of the body
CONTACT
US
If you have any questions, please contact our customer care center.
Our contact details are below: e
001-877-644-9366
N customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA.
CA
If you have any questions, please contact our
customer care center.
Our contact details are below:
416-792-6088
customerservice@aosom.ca
Imported by Aosom Canada Inc.
7270 Woodbine Avenue, Unit 307, Markham,
Ontario Canada L3R 4B9
MADE IN CHINA
UK
If you have any questions, please contact our
customer care center.
Our contact details are below:
50044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>