Vinsetto 921-275V80 Leather Massage Office Chair Instruction Manual
- June 1, 2024
- Vinsetto
Table of Contents
Vinsetto 921-275V80 Leather Massage Office Chair
IMPORTANT, RETAIN FOR FUTURE
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
SAFETY INFORMATION
-
The intended use:This product is intended for indoor use only.
Used for work and study. -
Maximum weight: 120 KG
-
To prevent the chair falling, make sure that the weight is evenly distributed.
-
Remove all parts from the box and make sure all parts are included before assembly.
-
Keep your feet always on the floor and do not press your head on the headrest when you recline the chair.
-
When you adjust the backrest, make sure your fingers are safe and out of harm’s way.
-
To avoid damage, never pull fast and strongly in your house.
-
This chair is designed to sit only and nothing else.
-
Don’t use it as a base or as a ladder.
-
Don’t sit in the arms of the chair.
-
This chair is designed to seat only one person at same time.
-
If some parts are missing, damaged or worn, stop using it immediately.
-
Avoid direct sunlight on the chair so that the plastic components won’t become brittle.
Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
MAINTENANCE INSTRUCTIONS
- Clean with vacuum cleaner.
- Wipe with a fabric dampened with water.
PARTS
HARDWARE
Assembly Instruction
| Input voltage | 100-240 | V |
|---|---|---|
| Input AC frequency | 50-60 | Hz |
| Output voltage | 12 | V |
| Output current | 0.6 | A |
| Output power | 7.2 | W |
| Average active efficiency | 85 | % |
| Efficiency at low load (10 %) | 72.73 | % |
| No-load power consumption | 0.104 | W |
FUNCTIONAL DESCRIPTION OF MASSAGER
Graphic presentation of Controller
- POWER : turn on/off selection key
- INTENSITY : high/low selection key.
- MODE : working mode selection key
- BACK : back massage function selection key
- LUMBAR : lumbar massage function selection key
- THIGH : thigh massage function selection key
- TIMER : set working time key
Operating Instructions
- Insert the power into the DC socket
- Press the POWER key to start the unit
- Press the TIMER key, the unit’s control time will switch between 15 min, 30 min and 60 min.
- Press the MODE key to select different working modes(PULSE,PRESS,WAVE, AUTO,NORMAL)
- Press the INTENSITY key to switch the intensity of vibration.
- Press the,BACK LUMBAR and THIGH key to massage the different places of the body.
Customer Support
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
