Vinsetto 921-318V91 Heated 6 Points Vibration Massage Executive Office Chair Instruction Manual
- June 1, 2024
- Vinsetto
Table of Contents
Vinsetto 921-318V91 Heated 6 Points Vibration Massage Executive Office
Chair
INSTRUCTION MANUAL
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center.
Our contact details are below:
UK| 0044-800-240-4004|
enquiries@mhstar.co.uk
---|---|---
DE| 0049-(0)40-88307530| service@aosom.de
FR| 0033-1-84166106| aosom@mhfrance.fr
ES| 0034-931294512|
atencioncliente@aosom.es
PT| 0034-931294512| info@aosom.pt.
IT| 0039-0249471447| clienti@aosom.it
IMPORTANT
SAFETY INFORMATION
-
The intended use:This product is intended for indoor use only.
Used for work and study. -
Maximum weight: 120 KG
-
To prevent the chair falling, make sure that the weight is evenly distributed.
-
Remove all parts from the box and make sure all parts are included before assembly.
-
Keep your feet always on the floor and do not press your head on the headrest when you recline the chair.
-
When you adjust the backrest, make sure your fingers are safe and out of harm’s way.
-
To avoid damage, never pull fast and strongly in your house.
-
This chair is designed to sit only and nothing else.
-
Don’t use it as a base or as a ladder.
-
Don’t sit in the arms of the chair.
-
This chair is designed to seat only one person at same time.
-
If some parts are missing, damaged or worn, stop using it immediately.
-
Avoid direct sunlight on the chair so that the plastic components won’t become brittle.
-
Your chair is equipped with rollers for textile floor coverings. If the chair is used on hard floors, e.g. har dwood floors, laminate, PVC , or tile, the rollers should be replaced for safe ty purposes, since these floors require the use of different rollers.
Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
MAINTENANCE INSTRUCTIONS
- Clean with vacuum cleaner.
- Wipe with a fabric dampened with water.
FUNCTIONAL DESCRIPTION OF MASSAGER
I. Graphic presentation of Controller
1. POWER: turn on/off selection key
2. HEAT: heating on/off key
3. INTENSITY: high/low selection key.
4. MODE: working mode selection key
5. BACK: back massage function selection key
6. LUMBAR: lumbar massage function selection key
7. THIGH: thigh massage function selection key
8. TIMER: set working time key
II. Operating Instructions
1. Insert the power into the DC socket
2. Press the POWER key to start the unit
3. Press the HEAT to turn on the heating function.
4. Press the TIMER key, the unit’s control time will switch between15min,
30min and 60min.
5. Press the MODE key to select different working modes(PULSE,PRESS,WAVE,
AUTO,NORMAL)
6. Press the INTENSITY key to switch the intensity of vibration.
7. Press the BACK, LUMBAR and THIGH key to massage the different places of
the body
IMPORTER
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>