Vinsetto 921-635V90 Massage Office Chair Instruction Manual
- June 4, 2024
- Vinsetto
Table of Contents
Vinsetto 921-635V90 Massage Office Chair
Specifications:
- Input voltage: 100-240 V
- Input AC frequency: 50/60 Hz
- Output voltage: 12 V
- Output current: 0.6 A
- Output power: 7.2 W
Product Usage Instructions:
Panel Description:
The panel includes indicators for massage position, massage position timer,
timer, mode, intensity, and power.
Operation :
- Connect the appliance to the adapter and plug it in.
- Press the Power button to turn the appliance on/off. It will cycle through modes every minute.
- Set a timer (15 or 30 minutes) by pressing the Timer button. The appliance will shut down when the timer ends.
- Adjust massage intensity by pressing the Intensity button. There are five levels, with the default at level two.
- Select a massage position by pressing the Position button. Choose between neck, back, and waist positions.
- Select a massage mode by pressing the Mode button. It will switch modes automatically after a minute.
Troubleshooting Common Faults:
- If the machine is not working, ensure it is correctly plugged into a power source.
FAQ:
Q: How do I adjust the massage intensity?
A: Press the ‘+’ button to increase intensity and ‘-‘ to decrease. There are
five levels available.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.
Our contact details are below:
Country | © Phone | |
---|---|---|
us | 001-877-644-9366 |
customerservice@aosom.com
CA| 416-792-6088|
customerservice@aosom.ca
UK| 0044-800-240-4004|
enquiries@mhstar.co.uk
DE| 0049-0( 40)-88307530| service@aosom.de
FR| 0033-1-84166106|
atencioncliente@aosom.es
ES| 0034-931294512|
atencioncliente@aosom.es
PT| 0034-931294512|
info@aosom.pt
IT| 0039-02494 71447| clienti@aosom.it
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
SAFETY INFORMATION
- The intended use: This product is intended for indoor use only. Used for work and study.
- Maximum weight: 120 KG
- To prevent the chair falling, make sure that the weight is evenly distributed.
- Remove all parts from the box and make sure all parts are included before assembly.
- Keep your feet always on the floor and do not press your head on the headrest when you recline the chair.
- When you adjust the backrest, make sure your fingers are safe and out of harm’s way
- To avoid damage, never pull fast and strongly in your house.
- This chair is designed to sit only and nothing else.
- Don’t use it as a base or as a ladder.
- Don’t sit in the arms of the chair.
- This chair is designed to seat only one person at same time.
- If some parts are missing, damaged or worn, stop using it immediately.
- Avoid direct sunlight on the chair so that the plastic components won’t become brittle.
- Your chair is equipped with rollers for textile floor coverings. If the chair is used on hard floors, e. g. har dwood floors, laminate, PVC, or tile, the rollers should be replaced for safe ty purposes, since these floors require the use of different rollers.
Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
MAINTENANCE INSTRUCTIONS
- Clean with vacuum cleaner.
- Wipe with a fabric dampened with water.
FUNCTIONAL DESCRIPTION OF MASSAGER
Panel description
Operation
- Connect the appliance to the adapter, then plug it in.
- Press the Power button to turn the appliance on/off. When turned on, the appliance will automatically cycle through the different modes every one minute. Once it reaches the eighth mode, it will return to the first mode again.
- Press this button to set a timer (15 or 30 minutes). When the timer is up, the appliance will automatically shut down.
- Press this button to adjust the massage intensity (there are five levels). The default setting is the second level. Press ‘+’ to increase the intensity. When you reach the fifth level, pressing ‘+’ will have no effect. Press ‘-‘ to reduce the intensity. When you reach the first level, pressing ‘-‘ will have no effect.
- Press this button to select a massage position. Keep pressing to choose between 1, 2 and 3 (neck, back and waist) respectively. Press the button again to exit this state – the appliance will resume to the automatic cycling through modes.
- Press this button to select one of the massage modes – it will automatically switch to the next mode after one minute.
Troubleshooting Common Faults
Specification:
US_IMPORTER: Imported by Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA MADE IN CHINA
ES/PT_ IMPORTADOR:
SPANISH AOSOM, S.L. C/ ROC GROS, N° 15. 08550, ELS HOSTALETS DE BALENYÀ,
SPAIN. B66295775 WWW.AOSOM.ES
ATENCIONCLIENTE@AOSOM.ES
TEL: 931294512 HECHO EN CHINA SPANISH AOSOM, S.L C.ROC GROS N.15, 08550.
ELS HOSTALETS
DE BALENYÀ TEL: 931294512 (SEG-SEX DAS 7:30H ÀS 16:30H)
INFO@AOSOM.PT WWW.AOSOM.PT