Silver Cross Seville Cot Bed Instruction Manual

Silver Cross Seville Cot Bed

Specifications

• Product Name: Seville Cot Bed
• Model Number: IND.1133875
• Dimensions: 80 x 60 x 40 inches
• Material: Wood

Product Usage Instructions

Step 1: Assembling the Cot Bed

• Follow the instructions to assemble components G x4, 2, 3, and 1 in the correct order.

Step 2: Attaching Components

• Attach components D x4, A, F x4, and G x4 as per the manual.

Step 3: Continuing Assembly

• Combine components G x4, F x4, D x4, and A following the given instructions.

Step 4: Additional Steps

• Proceed with step 4 as outlined in the manual.

Step 5: Adjusting Heights

• Adjust the cot bed base to one of the three available heights for safety reasons.

Step 6: Aligning Fixing Holes

• Carefully unscrew each of the 4 fittings until the fixing holes line up correctly.

Step 7: Further Instructions

• Follow the steps provided for completing the assembly process.

FAQ

• Q: What should I do if I leave the child unattended in the cot?
  

• A: Always ensure that the dropside is in the highest position if the child is left unattended.

• Q: How do I adjust the cot bed base height?
  

• A: Refer to Step 5 in the manual to adjust the cot bed base to the desired height for safety.

• Q: Can I disassemble the cot bed for storage or transportation?
  

• A: Yes, you can carefully disassemble the cot bed following the reverse order of assembly steps.

IMPORTANT RETAIN FOR FUTURE REFERENCE READ CAREFULLY
IMPORTANT: THE ASSEMBLY OF THIS PRODUCT REQUIRES TWO PEOPLE

Parts list

Fittings list

Installation Instructions

Step 1

Step 2

Step 3

Step 4

Step 5

• The cot bed base can be fitted at three different heights. The lowest is the safest.

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14

Step 15

Step 16

Step 17

Step 18

Warnings & Instructions For Safe Use & Maintenance

• WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc, in the vicinity of the cot/bed.
• WARNING: Do not use the product if any part is broken, damaged, torn, or missing. Approved replacement parts can be obtained from Silver Cross.
• WARNING: Do not leave anything in the cot/bed, or place it close to another product that provides a foothold or presents a danger of suffocation or strangulation. For example strings, blind/curtain cords etc.
• WARNING: Do not use more than one mattress in the cot.
• WARNING: Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed too close to other furniture or windows, and should be placed either tight to any wall or have a gap of 300mm between the wall and the side of the bed.
• WARNING: Do not place this child’s bed near heat sources, windows, and other furniture.
• The lowest position of the mattress base is the safest and should be used as soon as the baby is old enough to sit up. To prevent injury from falls, when the child can climb out of the cot, the cot shall no longer be used for that child.
• The thickness of the mattress chosen must not reduce the internal depth (from mattress surface to top of the side) to less than 500mm with the base in its lower position or 200mm with the base in its higher position.
• Maximum 10cm thick mattress to be used with this cot bed.
• If you leave the child unattended in the cot, always make sure that the dropside is in the highest position.
• All assembly fittings should be tightened properly, checked regularly, and re-tightened as necessary.
• Screws and bolts should not be loose because a child can squeeze parts of the body, or clothing e.g string, necklaces, ribbons for babies dummies, etc. could get caught. There would be a danger of strangulation.
• The cot/bed must be used on a level and stable surface, away from electric sockets. Once assembled do not dismantle. Never move the cot/ bed with a child in it.
• Excessive chewing may damage the wood and cause splintering. If any part is damaged stop using it until the correct replacement part has been obtained from Silver Cross.
• Your cot/bed can be cleaned by wiping with a damp cloth and drying immediately with a soft clean cloth.
• Do not use abrasives, bleach, alcohol, or ammonia-based household polishes.
• Take care when handling or moving furniture, careless handling can damage wooden furniture.
• Wood is a natural material, the color will darken with age.
• The size of the mattress to be used with the child’s bed is 1400x700mm.
• Cot conforms to BS EN 716-1/2:2017 and toddler bed to BS 8509:2008+A1:2011.
• Cots that convert to toddler beds are intended from birth up to approximately 4 years.
• The mattress length and width shall be such that the gap between the mattress and the sides and ends does not exceed 30mm.

CONTACT

• Silver Cross (UK) Ltd, Micklethorn, Broughton, Skipton, North Yorkshire, BD23 3JA
• silvercrossbaby.com
• IND.1133875

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>