Silver Cross Hoxton Cot Bed & Dresser Furniture Set Instruction Manual

: June 4, 2024
: Silver Cross

Table of Contents

Hoxton Cot Bed & Dresser Furniture Set
Fitting List
Warnings & Instructions For Safe Use & Maintenance
Parts List
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hoxton Cot Bed & Dresser Furniture Set
Instruction Manual

Hoxton Cot Bed & Dresser Furniture Set

IMPORTANT RETAIN FOR FUTURE REFERENCE READ CAREFULLY
Hoxton Dresser
IMPORTANT: THE ASSEMBLY OF THIS PRODUCT REQUIRES TWO PEOPLE

Fitting List

|
---|---
|
|
The cot bed base can be ﬁtted at three different heights. The lowest is the safest.|
|
|
|
|

Warnings & Instructions For Safe Use & Maintenance

WARNING: Be aware of the risk of an open fire and other sources of strong heat, such as electric bar fires, gas fires etc, in the vicinity of the cot/bed.
WARNING: Do not use the product if any part is broken, damaged, torn or missing. Approved replacement parts can be obtained from Silver Cross.
WARNING: Do not leave anything in the cot/bed. or place it close to another product that provides a foothold or presents a danger of suffocation or strangulation. For example strings. blind/curtain cords etc.
WARNING: Do not use more than one mattress in the cot.
WARNING: Children are likely to play. bounce, jump and climb on beds, therefore the child’s bed should not be placed too close to other furniture or windows, and should be placed either tight to any wall or have a gap of 300mm between the wall and the side of the bed.
WARNING: Do not place this child’s bed near heat sources, windows, and other furniture.
The lowest position of the mattress base is the safest and should be used as soon as the baby is old enough to sit up. b prevent injury from falls when the child is able to climb out of the cot, the cot shall no longer be used for that child.
The thickness of the mattress chosen must not reduce the internal depth (from mattress surface to top of the side) to less than 500mm with the base in its lower position or 200mm with the base in its higher position.
Maximum 10cm thick mattress to be used with this cot bed.
If you leave the child unattended in the cot, always make sure that the drop side is in the highest position.
All assembly fittings should be tightened properly checked regularly and re- tightened as necessary
Screws and bolts should not be loose because a child can squeeze parts of the body or clothing e.g string, necklaces, ribbons for babies dummies, etc. could get caught. There would be a danger of strangulation.
The cot/bed must be used on a level and stable surface, away from electric sockets. Once assembled do not dismantle. Never move the cot’s bed with a child in it.
Excessive chewing may damage the wood and cause splintering. If any part is damaged stop using it until the correct replacement part has been obtained from Silver Cross. \bur totted can be cleaned by wiping with a damp cloth and drying immediately with a soft clean cloth. Do not use abrasives, bleach, alcohol or ammonia-based household polishes. Take care when handling or moving furniture, careless handling can damage wooden furniture. Wood is a natural material, the color will darken with age. The size of the mattress to be used with the child’s bed is 1400x700mm. Cot conforms to BS EN 716.1/2:2017 and toddler bed to BS 8509:2008+A1:2011. Cots that convert to toddler beds are intended from birth up to approximately 4 years. The mattress length and width shall be such that the gap between the mattress and the sides and ends does not exceed 30mm.
Silver Cross (UK) Ltd. Micklethorn, Broughton, Skipton, North
Yorkshire, 8023 3.1A silvercrossboby.com IND.1126146

IMPORTANT RETAIN FOR FUTURE REFERENCE READ CAREFULLY
Hoxton Dresser
IMPORTANT: THE ASSEMBLY OF THIS PRODUCT REQUIRES TWO PEOPLE

Parts List

|
---|---
|
|
|
|
It is advised for safety reasons that the dresser is connected to the wall using the wall strap provided. All walls are different compositions and it is important the correct fittings are used. Wall fittings are not supplied with this furniture and it is advised to consult a professional before fitting.| Fix the wall strap to the furniture as shown with the fittings provided – do not use these fittings to connect to the wall. Consult a professional before fitting the strap to the wall.
Feed the wall strap through the hole and secure it with the screw provided on the inside of the Dresser.
|
|
|
|

Warnings & Instructions For Safe Use & Maintenance
Safety notes This item is o high-quality Silver Cross product. With correct use and maintenance, it will give you good service. If however, you should have any problems with your product, please contact your Silver Cross retailer who will take appropriate action.
WARNING: DO NOT LEAVE THE CHILD UNATTENDED The safety of your child is your responsibility.
WARNING: Regularly check all fittings and components of the changer is fully tightened and in good working order. If any parts have become worn or damaged then do not use the product and seek advice from your retailer or Silver Cross. Only use spare parts supplied by Silver Cross.
WARNING: Be aware of the risk of an open fire and another sour of strong heat, such as electric bar fires, gas fires etc. in the near vicinity of the changing unit.
WARNING: A changing mattress is not supplied with this product. Place the changing mattress on the changing surface inside the retaining rails.
WARNING: Suitable for children up to 12 months old (approximately). Maximum weight 11 kgs.
WARNING: Never use the changer if any parts are broken or missing.
WARNING: Never drag or pivot the Dresser Changer. It must be lifted and moved by at least two people.
WARNING: Before use, ensure the changer is on a level, stable surface.
WARNING: Do not allow children to climb on the changer. The changer can be cleaned with a damp cloth. Never use bleach, abrasive or strong detergents. Thoroughly dry immediately after cleaning.
WALL STRAP INFORMATION
Never modify or change the wall strap in any way. Never use any other fittings other than those supplied to attach the wall strap to the dresser. The wall strap provided is to be used with this product only. Never use the screw provided to attach the strap to the wall. All walls are of different compositions and it is important that the correct wall fittings are used. Consult a professional before attempting to attach the strap to the wall. No wall fittings are supplied with this product. The wall strap must not be used to replace any other fittings supplied with this piece of furniture We recommend the wall strap is used in all cases. To improve the stability of the furniture an even wood or tiled floor is best. A carpeted or warped floor can enable the furniture to rock, increasing the potential of the furniture to fall over.
IMPORTANT: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE