audio-technica AT-SB727 Wireless Stereo Disc Player System User Guide
- June 12, 2024
- Audio-Technica
Table of Contents
audio-technica AT-SB727 Wireless Stereo Disc Player System
Product Information
- Product Name: AT-SB727
- Model Number: AT-SB727
- Telephone Number: 0120-887-416
- PHS Number: 03-6746-0212
- Battery Type: Li-ion
- Bluetooth Version: 2.4GHz FH-SS10m
- Bluetooth SIG Certified: Yes
- FCC Notice Compliance: Part 15
- FCC RF Exposure SAR Value: 0.05 W/Kg
- ISED SAR Value: 0.05 W/Kg
- Responsible Company: Audio-Technica U.S., Inc.
- Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
- Telephone Number: 330-686-2600
- ISED Statement: CAN ICES-003 (B)/NMB-003(B)
Product Usage Instructions
- Before using the product, read through the caution guide provided in the manual to ensure correct usage. Keep the manual for future reference.
- Observe all safety precautions, warnings, and cautions while using the product to prevent accidents.
- The product is equipped with a rechargeable lithium-ion battery. Follow the cautions for rechargeable battery usage.
- If you are in the USA, this product complies with Part 15 of the FCC Rules. It must not cause harmful interference and should accept any interference received.
- Do not make any changes or modifications to the product that are not expressly approved in the manual, as it may void your authority to operate the equipment.
- Do not co-locate or operate this transmitter in conjunction with any other antenna or transmitter used in other systems.
- For RF exposure, the highest SAR value reported under FCC certification is 0.05 W/Kg when used next to the head with a minimum separation distance of 0 mm. Do not collocate or operate this transmitter with any other antenna or transmitter.
- For customers in Canada, this device complies with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). It must not cause interference and should accept any interference received. The equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Thank you for purchasing this Audio-Technica product. Before using the product, read through this caution guide to ensure that you will use the product correctly. Please keep this manual for future reference.
Safety precautionsAlthough this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Important information
Warning:
- To prevent fire or shock hazard, do not expose this apparatus to rain or moisture.
- Do not touch the moving parts.
Caution:
- Do not expose this apparatus to drips or splashes.
- To avoid electric shock, do not open the cabinet.
- Refer servicing to qualified personnel only.
- Do not expose this apparatus to excessive heat such as sunshine, fire or the like.
- Do not subject this apparatus to strong impact.
- Do not place any objects filled with liquids, such as vases, on this apparatus.
- To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus.
Do not install this apparatus in a confined space such as a bookcase or similar unit.
Install this apparatus only in the place where ventilation is good.
Cautions for rechargeable battery
The product is equipped with a rechargeable battery (lithium ion battery).
-
If battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately.
-
If battery fluid leaks, do not touch fluid with bare hands. If fluid remains inside the product, it may cause malfunction. If battery fluid leaks, contact your local Audio-Technica dealer.
- If fluid gets in your mouth, gargle thoroughly with clean water such as tap water and consult a doctor immediately.
- If your skin or clothing comes in contact with fluid, immediately wash the affected skin or clothing with water. If you experience skin irritation, consult a doctor.
-
To avoid leakage, generation of heat or explosion:
- Never heat, disassemble or modify the battery, nor dispose of it in a fire.
- Do not attempt to pierce with a nail, hit with a hammer or step on the battery.
- Do not drop the product or subject it to strong impact.
- Do not get the battery wet.
-
Do not use, leave or store the battery in the following places:
- Area exposed to direct sunlight or high temperatures and humidity
- Inside of a car under the blazing sun
- Near heat sources such as heat registers
-
Charge only with the included USB cable to avoid malfunction or fire.
-
Danger of explosion if battery is incorrectly replaced. Replace only with the same type.
When the product is disposed of, the built-in rechargeable battery needs to be discarded properly. Always consider the environmental issues and follow local regulations when disposing of batteries. -
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
For customers in the USA
FCC Notice
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution:
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems.
RF Exposure Information
FCC RF Exposure requirements: The highest SAR value reported under this
standard during product certification for use next to the head with the
minimum separation distance of 0 mm is 0.05 W/Kg. This transmitter must not be
collocated or operating in conjunction with any other antenna or transmitter.
This EUT is compliance with SAR for general population/uncontrolled exposure
limits in IC RSS-102 and had been tested in accordance with the measurement
methods and procedures specified in IEEE 1528 and IEC 62209. This equipment
should be installed and operated with minimum distance 0 mm between the
radiator and your body. This device and its antenna(s) must not be co-located
or operating in conjunction with any other antenna or transmitter.
The ISED SAR value is 0.05 W/Kg.
Contact:
Responsible Company: Audio-Technica U.S., Inc.
Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
Tel: 330-686-2600
For customers in Canada
ISED statement:
CAN ICES-003 (B)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with RSS-102 radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20cm
between the radiator & your body.
Notes on use
- Be sure to read the connected device’s user manual before use.
- Minimize the volume on your device before connecting the product.
- Do not subject the product to strong impact.
- Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places. Additionally, do not allow the product to get wet.
- The product should be positioned on a flat, level surface and not installed vertically, etc.
- Do not touch the record or attempt to move the product when in use.
- When not in use, remove the record and store the 45 RPM adapter and tonearm under the cover. Also, attach the provided protector to the cartridge.
- When carrying the product, hold the carrying handle firmly and do not grasp the cover.
- Do not touch the stylus of the cartridge with your finger.
- Do not allow the cartridge’s stylus to bump against the platter or the edge of the record.
- With long-term use, the product may become discolored due to ultraviolet light (especially direct sunlight) and wear.
- Make sure to hold the plug when connecting and disconnecting the USB charging cable. The USB charging cable may become severed or an accident may occur if you pull on the cable itself.
- When in use, do not attempt to connect or disconnect the USB charging cable.
- When you are not using the USB charging cable, disconnect it from the product.
- If you use the product near an electronic device or transmitter (such as a mobile phone), unwanted noise may be heard. In this case, move the product away from the electronic device or transmitter.
- If you use the product near a TV or radio antenna, noise may be seen or heard in the television or radio signal. In this case, move the product away from the TV or radio antenna.
- Ensure that the plug is inserted all the way to the base.
- To protect the built-in rechargeable battery, charge it at least once every 6 months. If too much time passes between charges, the life of the rechargeable battery may be reduced, or the rechargeable battery may no longer be able to be charged.
- Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight. Otherwise, the battery may deteriorate, possibly resulting in shorter periods of continuous use or failure to charge.
- If the battery runs out soon after charging the product, the rechargeable battery may have reached the end of its service life. If this is the case, the rechargeable battery will need to be replaced. Refer to the user manual for more information. (Battery replacement must be performed by a professional in some countries and regions.)
- This product can be used only in the countries where certified or where it complies with the Radio Law of the country in question. It cannot be used in countries other than those in which it is sold.
If the product does not connect to a device A
If pairing cannot be cancelled or is not successful, you can use pairing mode
to perform pairing again.
- Turn on the product with the audio cable disconnected.
- Press and hold the wireless function button (for about 2 seconds).
- The power supply indicator lamp of the product switches to flashing quickly in white and you will be able to pair with your desired Bluetooth device.
If the product operates abnormally B
Reset the product.
- Use a long, thin object to press the reset button on the bottom of the product.
- Reset is performed.
For a more comfortable Bluetooth communication experience
The effective communication range of this product varies depending on
obstructions and radio wave conditions.
For a more enjoyable experience, please use the product as close as possible
to the Bluetooth device. To minimize noise and sound disruptions, avoid
placing your body or other obstacles between the product’s antenna and the
Bluetooth device.
Communication specifications
Maximum RF output|
10 mW EIRP
Frequency band| 2.402 GHz – 2.480 GHz
Modulation type| GFSK, Pi/4DQPSK, 8DPSK
| 2400 – 2483.5 MHz
www.audio-technica.co.jp
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2022 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
Tel: ：+86 (0)20-37619291
GB8898-2011, GB/T9254.1-2021,GB17625.1-2012, 2022 12
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners.