Walmart M-95B 300M 95B Repeater User Manual
- June 9, 2024
- Walmart
Table of Contents
Walmart M-95B 300M 95B Repeater
Working condition
Working mode Diagram
Note: Ifyou need to connect the network cable, please connect the network cable after the configuration is completed.
Repeater Mode: As a wireless signal extender
- A. Extend your Wi-Fi signal without using any cables to reduce wiring troubles.
- B. Extend your Wi-Fi signal with a cable, connect your device and extender stably.
AP Mode: As a wired signal extender (access point)
Get better WiFi speed by connecting the router and the extender with network
cable in the poor WiFi signal area.
Quick Installation Guide
When the machine work normally,use the mobile phone to search and connect to Repeater-xx (xxxx is the last 4 numbers of the repeater MAC address)
Note: If the mobile phone does not automatically jump to setting page after connecting, please click “forget” the wifi name that has been connected on the mobile in wifi manage, turn off the wifi and then reopen the wifi to search it, or input ” 192.168.11.1″.
Wi-Fi Repeater mode setup
- Step 1: Click repeater mode to enter the network search page.
- Step 2: Select the wireless signal you want to expand,if it is a hidden network, you need to add it manually.
- Step 3: Enter your router connection password and click “NEXT”. If you don’t want the same name as your router, please choose and input the new name.
- Step 4: Click the “Finish” button to complete the relay mode configuration (The extended WiFi’s password is the same as the routers by default)
- Step 5: Complete Repeater Mode setting.
AP mode Setting
- Step 1: Click to Select “AP” mode to enter the setting page.
- Step 2: Set the wireless name and password with more than 8 digits(the wireless name and password can be set according to personal preference).
- Step 3: Click the “Finish” button to complete the AP mode configuration.
- Step 4: Complete AP mode setting.
FAQ (Frequently Asked Questions)
- Q1: What should I do if the mobile phone is connected to the extender SSID,but it does not automatically jump to the login interface?
- A1: lf the mobile phone is connected to the extender SSID,but it does not jump to login interface; you can open the mobile browser and enter “192.168.11.1” to enter.
- A2: Reset the extender(plug in the extender and wait for the system light to flash,press the reset button to restore the factory settings)
- Q2: After the relay mode extension is set successfully,what should I do if the extension signal is connected but there is no network?
- A1: Please check whether the network light is on for a long time; if it is not,please check whether the router can go online normaly
- A2: Reset the extender(plug in the extender and wait for the system light to flash,press the reset button to restore factory settings)
- A3: Power off the router and restart it.
- Q3: After the relay mode extension is set successfully,what should I do if the extension lights and network lights are not on?
- A1: In this case,the connection password of the upper-level router is incorrectly entered. Reset the extender and reset the extension
- Q4: The signal connected to the extender is good,but the Internet speed is slow,what should I do?
- A1: Check the status of the extension light,if it is red,please move the position of the repeater until the extension light is green.
- A2: Restart the router and reset the extender.
- A3: The extender only amplifies the signal of the original router to extend the coverage distance;it will not increase the network speed on the basis of theoriginal network speed.
- Q5: How to set WPS function?
- A1: After the extender powered on, shorty press the WPS buttons orn extender and host router to enable the WPS quick to match automatically.
- A2: WPS function only works under condition of host wireless router also support wps function.
- A3: The Extender WPS function will only be setup after extender turn to default reset status. Note: after you setup WPS function successfully, the extender will be in Repeater working mode automatically.
- Q6: What should I do if I want to reset the extension name and password?
- A1: Please reset the extender and reset it. When the system button is slow flashing,the reset is successful.
Read User Manual Online (PDF format)
Loading......