502618076 Tire change kit FXA 18V-L XCLICK Instruction Manual

502618076 Tire change kit FXA 18V-L XCLICK

Product Information

Specifications:

• Model: 502618076 FXAJD5082KIT G2
• Intended Use: Domestic
• Warranty: Conditions apply, void if damaged due to misuse, negligence, unauthorized repairs, or external damages
• Safety Standards: Complies with ANSI Z87.1 for eye protection

Product Usage Instructions

Safety Precautions:
Before operating the power tool, please ensure the following basic safety precautions are taken:

1. Read the instruction manual thoroughly to understand the tool’s application, limitations, and potential hazards.
2. Hold the power tool by insulating gripping surfaces when working near hidden wiring.
3. Wear eye protection with side shields complying with ANSI Z87.1.

Domestic Use Only:
This power tool is designed for domestic use only. It should not be used for commercial or professional purposes. Misuse of the product may void the warranty.

Product Disposal:
When disposing of the product, do not throw it in household waste. Recycle or dispose of it in an environmentally friendly manner at authorized facilities. Contact your local waste authority for disposal options.

Specific Safety Instructions:

1. Hold the power tool by insulated surfaces when working near live wires to prevent electric shock.
2. Read the operator’s manual thoroughly to understand applications, limitations, and hazards.
3. Follow the manufacturer and vehicle owner’s manual for product usage. Do not exceed recommended specifications.
4. Always wear eye protection complying with ANSI Z87.1 standards.
5. Be cautious with battery-operated tools to avoid electric shock or fire risks.

FAQs

Q: Can this power tool be used for professional purposes?

A: No, this power tool is intended for domestic use only and should not be used professionally.

Q: What should I do if the power tool is damaged?

A: If the power tool is damaged due to misuse, negligence, unauthorized repairs, or external factors, the warranty may be void. Contact customer service for further assistance.

Q: How should I dispose of the product?

A: Do not dispose of the product in household waste. Recycle or take it to an authorized disposal facility to minimize environmental impact.

INTRODUCTION
Thank you for purchasing this product which has passed through our extensive quality assurance process. Every care has been taken to ensure that it reaches you in perfect condition.

SAFETY INSTRUCTION

SAFETY FIRST
Before attempting to operate this power tool the following basic safety precautions should always be taken to reduce the risk of fire, electric shock, and personal injury. It is important to read the instruction manual to understand the application, limitations, and potential hazards associated with this tool.

CERTIFICATE OF GUARANTEE
This product is guaranteed for 2 Years, with effect from the date of purchase, and applies only to the original purchaser. This guarantee only applies to defects arising from, defective materials and or faulty workmanship that become evident during the guarantee period only and does not include consumable items. The manufacturer will repair or replace the product at their discretion subject to the following. That the product has been used under the guidelines as detailed in the product manual and that it has not been subjected to misuse, abuse, or used for a purpose for which it was not intended. That it has not been taken apart or tampered with in any way whatsoever has been serviced by unauthorized persons or has been used for hire purposes. Transit damage is excluded from this guarantee, for such damage the transport company is responsible. Claims made under this guarantee must be made in the first instance, directly to the retailer within the guarantee period. Only under exceptional circumstances should the product be returned to the manufacturer. In these cases, it shall be the consumer’s responsibility to return the product at their cost ensuring that the product is adequately packed to prevent transit damage, and must be accompanied by a brief description of the fault and a copy of the receipt or other proof of purchase. The manufacturer shall not be liable for any special, exemplary, direct, indirect, incidental, or consequential loss or damage under this guarantee. This guarantee is in addition to and does not affect any rights, which the consumer may have by the Sale of Goods Act 1973 as amended 1975 and 1999.

• The power tool is intended for domestic use only. The power tool is not suitable and is not intended for commercial or professional use.
• The warranty does not cover defects and damage to power tools resulting from use for purposes other than domestic use, in particular as a result of pushing through and abuse.

The warranty is voided in case the tool is damaged due to one of the conditions below:

1. Misuse of product or negligence of proper maintenance of product,
2. Commercial, professional, or rental use of the product,
3. Repair is done by an unauthorized service company.
4. Damages caused by external objects or substances.”

STATUTORY RIGHTS
This guarantee is in addition to and in no way affects your statutory rights.

PRODUCT DISPOSAL

• When this product reaches the end of its life or is disposed of for any other reason, it must not be disposed of in the household waste. To preserve natural resources, and to minimize adverse environmental impact, please recycle or dispose of this product in an environmentally friendly way. It should be taken to your local waste recycling center or other authorized collection and disposal facility.
• If in doubt consult your local waste authority for information regarding available recycling and/or disposal options.

SPECIFIC SAFETY INSTRUCTIONS

• Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fastener contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Know your power tool. Read the operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this power tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
• Please follow the manufacturer and vehicle owner’s manual on the use of this product. Do not exceed recommended specifications in any way. Tighten wheel nuts according to torque specifications stated in the vehicle’s owner’s manual. Over or under-tightening of wheel nuts could result in wheel failure.
• Always wear eye protection with side shields marked to comply with ANSI Z87.1. Following this rule will reduce the risk of serious personal injury.
• Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
• If an emergency dictates using this tool on the road, keep the work area as clear of clutter as possible. Park the vehicle on firm, level ground away from traffic.
• If you are forced to use this tool in wet conditions, extreme care must be taken as serious injury may result if the tool is exposed to moisture.
• Children must be kept at a safe distance when using this tool. Failure to do so may result in serious injury or death.
• Store in a dry location and keep out of the reach of children.
• Do not modify this tool and do not use it for a purpose for which it was not intended.
• Ensure the trigger is in the locked position when not in use and before installing the battery. Do not carry the tool with your finger on the On/Off trigger, whether the battery is installed or not.
• The Impact Wrench requires the use of both hands when operating. This helps maintain tool stability and keeps hands away from the work area.
• Do not operate the tool for more than 10 minutes continuously. Allow the tool to cool down between each continuous operation.
• Always block or chock wheels and apply emergency brakes before using this tool.
• Do not touch the Impact Wrench drive with your hands during operation.
• Do not use the tool to change vehicle wheels while the engine is running.
• When using the impact wrench on alloy wheels be careful not to over-tighten as it is possible to fracture the alloy wheel mountings. If in doubt consult a qualified mechanic and/or garage to confirm the correct torque with a torque wrench.

ADDITIONAL SAFETY RULES CHARGERS

1. Before using the charger, read all the instructions and cautionary markings on the charger and battery pack as well as the instructions on using the battery pack.
2. Only charge your batteries indoors as the charger is designed for indoor use only.
3. DANGER! If the battery pack is cracked or damaged in any other way, do not insert it in the charger. There is a danger of electric shock or electrocution.
4. WARNING! Do not allow any liquid to come into contact with the charger. There is a danger of electric shock.
5. The charger and battery packs supplied with it are specifically designed to work together. Do not attempt to charge the battery pack with any other charger than the one supplied.
6. Do not pull on the power cord to disconnect it from the main supply socket.
7. Do not use the charger if it has been subjected to a heavy knock, dropped, or otherwise damaged in any way. Take the charger to an authorized service center foracheckorrepair.
8. Do not disassemble the charger. Take it to an authorized service center when service or repair is required. Incorrect re-assembly may result in the risk of fire, electric shock, or electrocution.
9. To reduce the risk of an electric shock, unplug the charger from the power supply before attempting to clean it. Removing the battery alone does not reduce the risk.

ADDITIONAL SAFETY RULES FOR THE BATTERY PACK

1. The battery pack for this tool has been shipped in a low-charge condition. You should charge the battery pack fully before use.

2. Do not incinerate the battery pack even if it is seriously damaged or can no longer hold a charge. The battery pack can explode in a fire.

3. A small leakage of liquid from the battery pack may occur under extreme usage or temperature conditions. This does not necessarily indicate a failure of the battery pack. However, if the outer seal is broken and this leakage comes into contact with your skin wash the affected area quickly with soap and water. If the leakage gets in your eyes flush your eyes with clean water for a minimum of 10 minutes and seek immediate medical attention.
   Inform the medical staff that the liquid is a 25-35%solution of potassium hydroxide.

4. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks open or cracks, immediately discontinue its use and do not recharge it.

5. Do not store or carry a spare battery pack in a pocket toolbox or any other place where it may come into contact with metal objects. The battery pack may be short-circuited causing damage to the battery pack, burns, or a fire.

BATTERY CHARGING INFORMATION
Charging rates for NiCad and/or Li-Ion NiCad and/or Li-Ion battery charging rates are determined by the time taken to fully charge the battery and are determined by the charge current. The three most commonly used charging rates are typically:

• Fast charge.
• Slow charge.
• Trickle charge.

FAST CHARGE BATTERIES
The charging rates for fast-charge batteries can vary between 30 minutes and 90 minutes. The charging rate for the battery supplied with a cordless power tool is stated in the product manual.

SLOW CHARGE BATTERY
The charging rates for slow-charge batteries are between 3 hours and 5 hours.

TRICKLE CHARGE BATTERIES
The charging rates for trickle-charge batteries are between 7 hours and 9 hours.

IMPORTANT!

• NICAD AND/OR LI-ION BATTERY CHARGING INFORMATION.
• ALWAYS FULLY DISCHARGE A NiCad and/or Li-Ion BATTERY BEFORE CHARGING AND NEVER EXCEED THE CHARGING RATE TIME, EXCEPT WHEN “CONDITIONING” A NEW BATTERY.

CHARGING PROCEDURE

• When charging a new NiCad and/or Li-Ion battery it should be fully discharged followed by a full charge for the charging rate for the battery as stated in the product manual plus 30 minutes. This should then be followed by a full discharge and a further full charge for the charging rate for the battery as stated in the product manual plus 30 minutes. This procedure will condition the battery and equalize the cell voltages. Following this procedure will ensure the optimum operation of the battery.
• When repeatedly using the charger to charge many batteries always allow the charger to cool down before charging another battery. It is recommended that the cooling down period is not less than 30 to 45 minutes.
• When charging a battery that has been discharged during heavy use allow the battery to cool down before charging. It is recommended that the cooling down period is not less than 30 to 45 minutes.

NICAD AND/OR LI-ION CHARGING & CHARGERS

• NiCad and/or Li-Ion batteries need to be recharged with a reasonable amount of care, largely because they can be damaged by overcharging.
• Overcharging can result in the battery temperature and internal pressure to rise rapidly. This can cause the cells to distort and lose electrolytes, and in extreme cases where the internal pressure is extremely high they can even explode.
• This situation can also arise when an overcharged battery is fitted to the product and is being used. To avoid this extreme situation it is of vital importance that NiCad and/or Li-Ion batteries are fully discharged before charging and that the charge time is not exceeded except when “Conditioning” a new battery. Repeated charging of partially discharged batteries could cause failure of one or more of the cells.

SELF DISCHARGE
A lithium battery can self-discharge and lose its stored charge. Typically it can lose approximately 5% of its charge in the first month after fully charging (when stored at room temperature) and then lose it by a further 3% per month. When stored at higher temperatures the self-discharge rate will be accelerated.

BATTERY CHARGING INDOORS
This charger is designed to be used indoors. We do not recommend that it be used inside your home. Ideally, batteries should be charged on a bench in a workshop, garage, or shed. If the charging operation is to be carried out in your home the area must be well ventilated and the charger must be placed on a noncombustible surface ensuring that the ventilation slots are not blocked. Never exceed the charging time except when “Conditioning” a new battery, as this could damage the battery and charger.

BATTERY DISPOSAL

• When the battery fails to charge or maintain its charge, its usable life is exhausted. To preserve natural resources, please recycle or dispose of the battery pack properly. This battery pack contains nickel-cadmium cells. Before disposal ensure that the battery pack is fully discharged by operating your cordless product then remove the battery pack from the drill housing and cover the battery pack connections with heavy-duty tape, to prevent short circuits and energy discharges which could result in a fire. Do not attempt to open or remove any of the components.
• Consult your local waste authority for information regarding available recycling and/or disposal options.

SPECIFIC SAFETY INSTRUCTIONS

RE-CHARGEABLE BATTERIES.

• Batteries may leak or explode if not charged or handled correctly. Always observe the following precautions when handling batteries. Ensure that the machine is switched off before removing or fitting batteries.
• Do not use this battery with any other product.
• Do not attempt to fit the battery the wrong way around.
• Do not short out, or attempt to dismantle the battery.
• Do not expose the battery to flames or excessive heat.
• Do not immerse in or expose the battery to water.
• Do not store or transport the battery with loose metal objects such as drill and driver bits.
• Batteries are prone to leakage when discharged. To avoid damage to the product, remove or re-charge the battery when no charge remains. Store the battery in a cool place when not in use.
• After prolonged use, the battery may become hot. Before removing the battery, switch the machine off and allow the battery to cool down. Do not use the battery if you notice any discoloration or distortion of the battery casing.

GENERAL SAFETY RULES

WARNING!
Read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1. WORK AREA

   • Keep the work area clean and well-lit. Cluttered and dark areas invite accidents.
   • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes.
   • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

   • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
   • Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   • Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
   • When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.

3. PERSONAL SAFETY

   • Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
     A moment of inattention while operating power tools may result in serious personal injury.

   • Use safety equipment. Always wear eye protection. Safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.

   • Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

   • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

   • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

   • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

   • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of these devices can reduce dust-related hazards.

4. POWER TOOL USE AND CARE

   • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
   • Do not use the power tool if the switch does not turn on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   • Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
   • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
   • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   • Use the power tool, accessories tool bits, etc., under these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

5. BATTERY TOOL USE AND CARE

   • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
   • Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
   • When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
   • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6. SERVICE

   • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

COMPONENTS & CONTROLS

COMPONENTS & CONTROLS (FIG 1)

1.  1/2 inch anvil

2.  Forward/reverse switch
3.  Handgrip
4.  Belt clip attachment point
5.  Li-ion battery
6.  Battery release catch
7.  On/Off trigger switch
8.  Charger
9.  3 CRV sockets (17,19, 21mm)

UNPACKING

• Caution! This packaging contains sharp objects. Take care when unpacking. Remove the machine, together with the accessories supplied, from the packaging. Check carefully to ensure that the machine is in good condition and account for all the accessories listed in this manual.
• Also, make sure that all the accessories are complete. If any parts are found to be missing, the machine and its accessories should be returned together in their original packaging to the retailer.
• Do not throw the packaging away, keep it safe throughout the guarantee period, then recycle it if possible, otherwise dispose of it by the proper means. Do not let children play with empty plastic bags due to the risk of suffocation.

CHARGING THE BATTERY PACK

• Warning! Only charge in compatible 18V chargers. Use of other chargers may result in fire, damage, or serious personal injury.
• The battery pack for this tool has been shipped in a low-charge condition to prevent possible problems. Therefore, you should charge it until the green LED on the front right-hand side of the charger comes on.
• Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) for them to become fully charged.
• First, read the safety instructions then follow the charging instructions.
• Plug the charger into a standard 230V~50Hz mains socket outlet, the green LED on the front left-hand side of the charger will illuminate.
• Do not allow the cable to become knotted or kinked.
• Place the battery pack into the charger base.
• (Note the battery has raised ribs which allows it to fit into the charger only one way). Time the charge for 137 minutes only.
• The red LED on the front right-hand side of the charger will illuminate to indicate charging is in progress. A green LED will illuminate when the battery is fully charged.
• Unplug the charger when not in use and store it in a suitable storage cabinet.
• Avoid charging your battery in freezing conditions as charging power will not be sufficient.
• When charging more than one battery pack in succession allow at least 30 minutes for the charger to cool down before charging an additional battery.
• Always remove the battery pack and store it safely when the tool is not in use.
• Caution: If at any point during the charging process, none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. DO NOT insert another battery.

INSTALLING THE BATTERY PACK

Warning!
Always remove the battery pack from your tool when you are assembling parts, making adjustments, cleaning, carrying, transporting, or when not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.

NOTE:
To avoid serious personal injury, always remove the battery pack and keep your hands clear of the lock-out button when carrying or transporting the tool. Slide the battery pack into the tool base, Fig.2. (Note the battery has raised ribs which allows it to fit into the pole saw only one way). Make sure the battery pack snaps into place and that the battery pack is secured in the tool before beginning operation.

Improper installation of the battery pack can cause damage to internal components.

• REMOVING THE BATTERY PACK
  Locate the battery release catch on the top of the battery and press downwards, Fig.3. Whilst holding down the battery release catch slide the battery pack away from the tool.

CHARGE STATUS

To display the amount of charge left in the battery, press the charge level indicator button, Fig.4.

VARIABLE SPEED CONTROL (FIG. 5)
Simply apply light pressure to the trigger to start the wrench at a slow speed. Increasing the pressure on the switch will increase the speed of the wrench.

Note:
You might hear a high-pitched noise from the switch during use. Do not be concerned; this is a normal part of the switch function.

FORWARD & REVERSE SWITCH
This feature is selected via a slide switch located above the trigger, Fig.6. To select the direction of the wrench rotation simply push the button fully in on the left side for reverse rotation. To change to forward rotation push the button fully in on the right side of the handle.

Note:
As a safety precaution from accidental engagement while being carried pushing the forward/reverse button into the middle or neutral position will render the wrench inoperative.

• Caution: To prevent gear damage, always allow the anvil to come to a complete stop before changing the direction of rotation.
• Note: The wrench will not run unless the direction of the rotation selector is pushed fully to the left or right.
• Avoid running the wrench at low speeds for extended periods. Running at low speeds under constant usage may cause the wrench to become overheated. If this occurs, cool the wrench by running it without a load and at full speed.

INSTALLING AND REMOVING SOCKETS

• Use only sockets designed for impact wrenches. Always select the correct size impact socket for nuts and bolts. Using the wrong size socket may damage the nut or bolt and cause the fastening torque to be inaccurate or inconsistent.
• Remove the battery pack.
• Push the socket onto the anvil until the detent pin locks it into place, Fig.7.
• To remove the socket, pull it away from the anvil.

INSTALLING THE BELT CLIP

• Before fitting the belt clip set the forward/reverse button to the center position or turn the tool off and disconnect the battery pack.
• To reduce the risk of serious personal injury, do not suspend the tool overhead or suspend objects from the belt hook. Only hang the tool’s belt clip from a work belt.
• When attaching or replacing the belt clip, use only the screw that is provided. Be sure to securely tighten the screw with a Phillips screwdriver.
• The belt clip can be attached to either side of the tool using only the screw provided, to accommodate left or right-handed users.
• To move the belt clip, remove the screw that holds the belt clip in place then reassemble on the opposite side. Be sure to securely tighten the screw.

OPERATING THE IMPACT WRENCH

• Proper fastening torque may be determined by the kind of bolt, the size of the bolt the material, or the workpiece. It is helpful to perform a test operation to determine the proper fastening time for the nut or bolt you are using. While performing the test, make note of the speed selection.
• Hold the tool pointed straight at the nut or bolt.
• Depress the switch and fasten it for the proper fastening time.
• After fastening, always check the torque with a torque wrench.
• NOTE: Do not use this tool to install lug nuts on wheels without a torque-limiting device (not included). Doing so could result in galled or broken lugs.

IMPACT TIME

• Many variables exist that will cause the available torque of the fastener to vary considerably. The optimum impact time is approximately 6 seconds.
• NOTE: Using a universal joint or extension bar may reduce the fastening force of the impact wrench and require a longer fastening time.

MAINTENANCE

WARNING!
Always remove the battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.

• This power tool normally requires no maintenance; from time to time the ventilation slots on the motor casing should be cleaned out. If the unit should become defective, repair should be performed by an authorized service agent for electric tools.
• Tightening Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

Warning!
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.

TECHNICAL SPECIFICATION

CHARGER

ENVIRONMENTAL PROTECTION

Information for (private householders) for the environmentally responsible disposal of Waste Electrical and Electronic Equipment (WEEE)

This symbol on products and or accompanying documents indicates that used and end-of-life electrical and electronic equipment should not be disposed of in household waste. For proper disposal, treatment, recovery, and recycling, please take these products to designated collection points, where they will be accepted on a free-of-charge basis. Alternatively, in some countries, you may be able to return your products to your retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential adverse effects on human health and the environment that could otherwise arise from inappropriate waste disposal and handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste by national legislation.

FOR BUSINESS USERS IN THE EUROPEAN UNION.
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union.

• This Symbol is only valid in the European Union.
• If you wish to dispose of this product, please contact your local authorities or dealer and ask for the correct method of disposal.

SYMBOLS

The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.

EU DECLARATION OF CONFORMITY

1. Product model

2. Name and address of the manufacturer or his authorized representative:
   Nuair Ibérica, Lda. Rua da Zona Industrial, 560, 4520-114, Santa Maria da Feira, Portugal Tel: +351 256 580 930. Email: sat@nuair.pt.

3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

4. The object of the declaration

   • Equipment: 18V Impact Wrench Kit
   • Brand name: FXA
   • Model/type: FXAJD5082KIT G2

5. The object of the declaration described above conforms with the relevant Union harmonization legislation: 2006/42/EC, 2014/35/EU, 2014/30/EU, 2011/65/EU&(EU) 2015/863

6. References to the relevant harmonized standards used or references to the other technical specifications about which conformity is declared: EN62841-1; EN60335-1; EN60335-2-29; EN62233; EN55014-1; EN55014-2; EN61000-3-2; EN61000-3-3

7. The person authorized to compile the technical file

   • Name
   • Address Nuair Ibérica, Lda. Rua da Zona Industrial, 560, 4520-114, SMF, Portugal
   • Signed for and on behalf of
   • Authorised Representative

Manufactured for
Kesko Corporation Building and Technical trade, Työpajankatu 12, FI- 00580 Helsinki © Kesko 2024. Made in China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>