PIOCREAT C01 3D Printer User Manual

PIOCREAT C01 3D Printer

Specifications

• Model: C01
• LCD screen: 10.114K Ultra HD Mono LCD
• Input voltage: 100-120/200-240V~50/60Hz
• Print method: U disk / WIFI
• XY axis accuracy: 16.8*24.8m
• XY Z-axis resolution: 0.01-0.2mm (layer thickness)
• Z-axis resolution: 70mm/h0.05mm
• Special resin: High Fidelity Model Resin, Flexible, ABS, Transparent, Water Washable resin, Standard resin, High hardness, High toughness, Biocompatible Resin, ABS UV integrated lamp bead (wavelength 405nm)
• Software: Piocreat Box / CHITUBOX
• Nominal power: 300W
• X/Y-axis resolution: 13320*5120
• XY Print size: 223 x 126 x 200mm (length x width x height)
• Machine size: 340 x 292 x 552mm (length x width x height)
• Package size: 480 x 425 x 720mm (length x width x height)
• Machine weight: 15.77KG
• Gross weight: 20.55KG

Product Usage Instructions

1. Setup and Assembly
   Follow the assembly instructions provided in the manual to set up the printer correctly.

2. Leveling and Calibration
   Use the leveling screws to ensure the platform is flat and aligned. Calibrate the XY and Z-axis according to the specified accuracy.

3. Loading Resin
   Fill the resin vat with the desired resin type following the guidelines for resin usage.

4. Printing Process
   Transfer your print files to the USB disk and insert it into the USB port on the printer. Use the touch screen to select and start the printing process.

5. Troubleshooting
   If you encounter any issues during printing, refer to the troubleshooting section in the manual for guidance.

Frequently Asked Questions (FAQ)

• Q: Can children use the printer unsupervised?
  A: No, children under 10 years should not use the printer without supervision for safety reasons.

• Q: What should I do if the nozzle or printing platform mechanism needs to be manually moved?
  A: Avoid manually moving the nozzle or platform mechanism while booting up to prevent automatic power-off for safety.

• Q: What type of resin can be used with this printer?
  A: The printer is compatible with various resins including High Fidelity Model Resin, Flexible, ABS, Transparent, Water Washable resin, Standard resin, High hardness, High toughness, and Biocompatible Resin.

C01
3D Printer User Manual

Dear Consumers,

Thank you for choosing our products.For the best experience, please read the instructions before operating the Printer. Our teams will always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the printer.
For a better experience in using our product, you can also learn how to use the printer in the following ways:

1. View the accompanied instructions and videos in the U disk.
2. Visit our official website (www.piocreat3d.com) to find relevant software/hardware information,contact details and operation and maintenance instructions.

NOTES

1. Do not use the printer any way other than described herein in order to avoid personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
4. Please use recommended resin for not to damage the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
6. Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
7. Do not wear cotton gloves when operating the printer, avoiding the burns, injury and machine damage caused by the moving parts.
8. Please wait a moment after the print is finished. And please wear gloves to take out the print by tools.
9. Children under 10 years should not use the printer without supervision.
10. This machine is equipped with a security protection mechanism. Do not manually move the nozzle or printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety.
11. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
12. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Piocreat will not be responsible for any violators’ legal liability under any circumstance

Introduction

1. Limit switch
2. Platform screws
3. Leveling screw
4. Building platform
5. Tank screws
6. Resin vat
7. Touch screen
8. USB port
9. Power port

Equipment Parameters

Basic Parameters

Package Content

Tool list

Interface Information

• Screen clearing: material tank cleaning；
• Z-axis movement: Back to Zero and leveling;
• Print settings: printing parameters, device control,feeding system and Pre-Heat;
• System settings: set WALN, set language and region, upgrade firmware version (local upgrade & network upgrade); view device information, restore factory settings

Note : Check whether the light source is normal when clearing th e screen. The UI is only for reference only and shall be subjec t to the actual UI

Level Platform

Note : The printing platform has been leveled at the factory. If it needs leveling due to transportation or other reasons, please follow the steps
below to adjust the printing platform

1. Note : The printing platform has been leveled at the factory. If it needs leveling due to transportation or other reasons, please follow the steps below to adjust the printing platform
2. As shown above.

If the platform does not stick to the print screen, do as the following:

1. After unscrewing the leveling screws, press“Leveling” to keep the platform and the print screen parallel.
2. Gently press the platform and tighten 4 screws clockwise, and the platform can be leveled successfully.
3.  Press“Auto-homing”，move up the z-axis to a proper position, and then tighten the fixing screws at both ends of the resin vat.

Note: The UI is only for reference only and shall be subject to the actual UI.

Load Resin

• Pour the UV photosensitive resin into the resin vat. The slot capacity is 500ml/1000mlC
• Tips : How to change resin: Take out the resin vat slowly, pour out the remaining resin into the container, clean the resin vat, pour in new resin, and then install the resin vat to the machine.
• Caution : Resin may cause skin irritation or an allergic skin reaction. Please wear gloves before use to avoid direct contact with the skin

Release Film Instructions

• First, remove the 14 screws at the bottom of the vat and take down the old release film.

• Gently remove the protective film on the front and back of the release film.

• Use the release film fixing plate to press the release film into the
  bottom of the vat, and tighten the screws diagonally across from each other one at a time. (Note: Make sure there are no debris between the fixing plate and release film)

• Make sure the release film is flat and tight after installation.
  (Note: If not flat or loose, please check whether the screws are locked or the release film is abnormal)

Tips:

1. The diagram is a reference for the film change procedure, please refer to the physical product; if there are excess edges after installation of the release film, you will need to cut them off.
2. It is recommended to replace the release film when it has been used for more than 200 hours.

USB Disk Printing

1. Open the Piocreat BOX slicing software.
2. Click the right printer column to select the device model
3. And click “OPEN” on the top left of the interface to impo trhte model file;
4. Setting Printing Parameters (If use Default-Parameters,skip this step)
5. Click the “Add” icon in the Parameter Configuration
6. Click the Basic Setting Option
7. Set the appropriate parameters → ④Click “Add”
8. Add bracket to the model (skip steps ① and ② if no bracket is added).
9. Click the icon above
10. Set the corresponding parameters
11. Click the slice
12. Waiting for the auto slicing to complete (you can adjust the print parameters as required).
13. →Click “Save”icon to save the sliced file. (* slicing tutorial see the official website slicing video www.poicreat3d.com)

1. Generate .cxdlpv4 file，and save the file to U dis
2. Insert the U disk → press the print button.
   Note : The UI interface is for reference only,and shall be subject to the actual UI.
   Warning : During the printing process the machine can’t be shaken, so as not to avoid influencing affect the printing quality.

1. Select USB disk files;
2. Select USB disk files;
3. Press “Start” button
4. Printing··

WIFI Print

1. Open the Piocreat BOX slicing software.

2. Click the right printer column to select the device model

3. And click “OPEN” on the top left of the interface to import the model file

4.  Setting Printing Parameters (If use Default-Parameters,skip this step)

5. Click the “Add” icon in the Parameter Configuration

6. Click the Basic Setting Option

7. Set the appropriate parameters

8. Click “Add”

9. Add bracket to the model (skip steps ① and ② if no bracket is added).

10. Click the icon above

11. Set the corresponding parameters

12. Click the slice

13. Waiting for the auto slicing to complete (you can adjust the print parameters as required).
    Click “Print”icon to use WIFI-printing (* slicing tutorial see the official website slicing video www.piocreat3d.com)

14. Add bracket to the model (skip steps ① and ② if no bracket is added).

15. Click the icon above

16. Set the corresponding parameters

17. Click the slice;

18.  Select the file on the machine to initiate printing when the transfer is complete

Note: Make sure the Piocreat BOX and the printer are connected to the same WiFi.

Wiring Connection

Adapter board circuit wiring diagram

Troubleshooting

After-Sales Service Card

• Warranty Policy ~
• 1-year Limited Warranty since the date of product purchase.
• No Warranty for the Release Film and Product Gift (U disk, Gloves, Screwdriver, Paper funnel, Brush, etc.)

What Is Covered?
Any defects in material, workmanship of product will be covered until you provide any relating documents and information, including but not limited to:

• User of the product are in the country of purchase
• Defective product is a PIOCREAT product
• Proof of Purchase

What Is Not Covered? ~
PIOCREAT does not guarantee the service as a result of:

1. The proof of purchase being altered or made illegible.
2. The product label or serial number on the product being altered or made illegible.
3. Normal wear of accessories or consumables for use as release fllm.
4. Malfunction or damage caused by personal retrofitting, or improper installation and usage.
5. Malfunction or damage caused by use in non-recommended working environments.
6. Malfunction or damage caused by overuse (overload) or wrong maintenance (damp, mildew, etc.)
7. Malfunction or damage caused by Force Majeure (fire hazard, earthquake, lightning and floods, etc.)
8. Malfunction or damage caused by the use of other brand parts or consumable

Technical Support

• Please enjoy our technical support of the whole lifetime (Except technical problem beyond product itself) after purchase the product while product documents as user manual attached in U disk for instruction.
• Please provide product Serial Number when apply for technical support

Kindly Notification

• Please read the user manual and warranty card carefully before the use.
• For any service, Please priorly contact local seller or contact us via
• Email: after@piocreat3d.com for support.
• See www.piocreat3d.com / for specific warranty information about your product and procedures to act on a warranty claim

WARRANTY

Before returning the product and filling in a warranty, please contact after- sale person for going through after-sale formality. And attach this waranty card along with the returned machine.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Due to the differences between different machine models, the physical objects and the final images can differ.The final explanation rights shall be reserved by Shenzhen Piocreat 3D Technology Co., Ltd.

• Shenzhen Piocreat 3D Technology Co., Ltd.
• Add: Room 1308, Building No. 3, Jincheng Industrial Area, Tongsheng Community, Dalang Street, Longhua District, Shenzhen, China, 518109
• Tel: +86 0755-2103 9743
• Official Website: www.piocreat3d.com
• E-mail: after@piocreat3d.com hello@piocreat3d.com
• www.szcx3d.com

References

• We are the 3DEXPERIENCE company | Dassault Systèmes
• 创想三帝_工业级3D打印机_光固化3D打印机_颗粒物3D打印机品牌厂家

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>