PIOCREAT G5Ultra 3D Printer User Manual

: September 6, 2024
: PIOCREAT

G5Ultra 3D Printer

“`html

Specifications

Model: G5Ultra
Printing Size: 500x500x400mm
Molding Tech: FGF
Nozzle Number: Single nozzle
Slice Thickness: 0.2-1.0mm
Nozzle Diameter: 0.4-2.0mm (optional: 3.0),
standard: 0.8mm, 1.0mm, 2.0mm
X-Y axis positioning accuracy: X-Y
Filament:
PLA/PETG/PETG+10%GF/ABS/PA6/PS/GPPS/PP/PP+30%GF/TPE/TPV/TPU/15-5PH
and other composite materials
Slice Software:
Piocreat_Slicer/Cura/Simplify3D
File Format: STL, OBJ, AMF
File Transfer: USB/WIFI

Product Usage Instructions

1. Equipment Installation

Follow the detailed steps provided in the user manual to install
all the equipment components correctly.

2. Circuit Wiring

Ensure proper circuit wiring as per the instructions provided to
avoid any electrical issues.

3. Equipment Wiring

Connect all equipment wiring securely to ensure proper
functioning of the printer.

4. Load Filament

Insert the filament into the loading barrel and follow the
guidelines to load it properly.

5. Z-axis Offset & Z Level the Platform

Adjust the Z-axis offset and level the platform using the
provided tools for accurate printing.

6. Preheat Settings

Set the preheat temperature and allow the printer to reach the
desired temperature before starting a print.

7. Model Slicing

Slice your model using the recommended software for optimal
printing results.

8. Start Printing

Begin printing your model after ensuring all settings are
correct and the printer is ready.

9. Operation Guide

Refer to the operation guide in the manual for any specific
instructions during printing.

10. Troubleshooting

If you encounter any issues, refer to the troubleshooting
section in the manual for solutions.

11. Maintenance

Regularly maintain and clean your printer as instructed to
ensure its longevity and performance.

12. After-sales Service

Contact our support team via the provided phone number or email
address for any post-purchase assistance.

Frequently Asked Questions (FAQ)

Q: Can children use the printer unsupervised?

A: Children under 10 years should not use the printer without
supervision for safety reasons.

Q: What filament types are compatible with this printer?

A: The printer supports various filament types including PLA,
PETG, ABS, TPU, and more. Refer to the user manual for a complete
list.

Q: Which software can I use for slicing models?

A: You can use Piocreat_Slicer, Cura, or Simplify3D for slicing
your models before printing.

“`

G5Ultra
FGF
3D Printer User Manual
3D
V1.0

Dear Consumers, Thank you for choosing our products.For the best experience, please read the instructions before operating the Printer. Our teams will always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer. For a better experience in using our product, you can also learn how to use the printer in the following ways: View the accompanied instructions and videos in the U disk.
U

NOTES
1 Do not use the printer any way other than described herein in order to avoid personal injury or property damage. 2 Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well- ventilated, low-dust environment. 3 Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality. 4 Please use recommended resin to in case damage of machine. 5 Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet. 6 Please do not open the plastic cover during usage, otherwise the printing will be interrupted. 7 Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage. 8 Please wait a moment after the print is finished. And please wear gloves to take out the print by tools. 9 Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame,
guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface. 10 Children under 10 years should not use the printer without supervision. 11 This machine is equipped with a security protection mechanism. Do not manually move the nozzle or printing platform mechanism manually while booting
up, otherwise the device will automatically power off for safety. 12 Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to
safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Piocreat will not be responsible for any violators’ legal liability under any circustance.
1 ; 2 ; 3 ; 4 ; 5 ; 6 ; 7 ; 8 ; 9 ; 10 10; 11 ; 12

Contents
Introduction Parameters Parts list Equipment installation Circuit Wiring Equipment wiring Load filament Z-axis Offset Z Level the platform Preheat settings Model slicing Start Printing Operation guide Troubleshooting Maintainance After-sales service card

01-01 02-02 03-04 05-08 09-09 10-13 14-14 15-15 16-16 17-17 18-25 26-27 28-28 29-30 31-31 32-34

1. Introduction

1 Gantry top sheet metal 2 Gantry left sheet metal 3 Loading barrel 4 Feeding tube 5 Nozzle signal terminal 6 XX-axis limit switch 7 Screw extrusion motor 8 Screw kit 9 Hot bed platform 10 Y
Y-axis belt adjustment seat 11 Motherboard power box
01

12 Tie rod fixing plate 13 Gantry right sheet metal 14 Pull rod 15 Nozzle control panel 16 XX-axis beam guide 17 X
X-axis belt adjustment seat 18 ZZ2Z-axis Motor (Z2) 19 LL-shaped connecting piece 20 Power Combination Switch 21 Touch operation screen 22 Drum cover

23 Gantry left and right sheet metal guide components
24 ZZ-axis sliding roller assembly 25 XX-axis sliding roller assembly 26 CR- TouchCR-Touch Auto Leveling Kit 27 Nozzle cooling fan 28 Y Y-axis motor kit 29 Y Y-axis limit switch 30 Y Y-axis energy chain components 31 ZT Z-axis T-type lifting screw 32 X X-axis Motor 33 Z(Z1) Z-axis Motor (Z1) 34 Support feet

2. Equipment Parameters

Basic Parameters

Model |

G5Ultra

Printing Size |

500x500x400mm

Molding Tech |

FGF

Nozzle Number |

Single nozzle |

Slice Thickness |

0.2-1.0mm

Nozzle Diameter |

0.4-2.0mm (optional | 3.0), standard | 0.8mm, 1.0mm, 2.0mm

X-Y axis positioning accuracy | X-Y

±0.1mm

Filament |

PLA/PETG/PETG+10%GF/ABS/PA6/PS/GPPS/PP/PP+30%GF/TPE/TPV/TPU/15-5PH and other composite materials |

Slice Software |

Piocreat_Slicer/Cura/Simplify3D

File Format |

STLOBJAMF

File Transfer |

USB/WIFI

Bed Temp |

120

Max temp of nozzle upper section | 360

Max temp of nozzle lower section | 420

Continue printing after restoring power | YES |

Continue printing after adding materials | YES |

Auto Leveling |

YES |

Language |

English//Deutsch/Español/Français/Italiano//Portugal/ /Türkce

Computer Operating System|

Windows XP/7/8/10 MAC/Linux_x64

Printing Speed |

0~220mm/s

Power Supply |

Input|:AC100-240V 50/60Hz Output|:DC 24V

Nominal power |

1450W

02

3. Package Content

Base Frame x1

Gantry Frame x1

Display x1

4 Power Cord x1

5 Pull rods x2

6 L-shaped connecting piece |L x2

7 Sems Screw M36 x4 M430 x3 M5*40 x4

8 Hexagon flat round head screws M512 x2 M518 x8

9 Hexagon flat round head screws M5*20 x2 M5 Flat padM5 x2

10 ABS granules for consumables ABS 2KG x1

Tips: the above accessories are for reference only, in kind prevail! 03

3. Package Content

U Disk (random color) 11 U
x1
15 Metal blade x 1
19 Nozzle Cleaner x2

Tool list

Wrench 12
x1
16 CR-touch x1 CR-touch
20 Nippers x1

Open-end wrench 13
x4
Nozzle0.8 x1 Nozzle1.0 x1 17 Nozzle2.0 x1
4*150 black 21 rolled strip x10

Screwdriver 14
x3
Socket wrench x 1
18

Tips: the above accessories are for reference only, in kind prevail! 04

4. Install the Display
1 Use the No. 3 Allen wrench to fix the screen bracket with 3PCS-M430 Allen head screws in the position as shown in the figure; 33PCS-M430 2 Then slide the touch screen kit into the mounting bracket hole; 3 After the display is installed, please connect the display cable.
3 Display x1
7 M4x30 Hexagon flat round head screws x3 | M4x30 x3
05