BLACKZON Smyter MT Turbo 3S Brushless Instruction Manual

: August 16, 2024
: BLACKZON

Table of Contents

BLACKZON Smyter MT Turbo 3S Brushless
Product Information
Product Usage Instructions
Components
Decal Application
Transmitter Information
Charging the Battery
Getting Started
Headlight Installation
Maintenance after driving
Trouble Shooting
Parts List
Exploded View
Wheelie Bar Installation
Guarantee
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACKZON Smyter MT Turbo 3S Brushless

Product Information

Specifications

Product: Blackzon RC Vehicle
Type: Radio Controlled Vehicle (RC vehicle)
Components: Transmitter, Wheelie Bar, ESC/Receiver
Recommended Charger: USB Adaptor with an output of at least 2A (Not included)

Product Usage Instructions

Safety Precautions

Read and understand the instruction manual thoroughly before operating the model.
Never connect the rechargeable drive battery in reverse polarity or disassemble the battery.
Avoid running RC models near people, animals, public streets, or highways to prevent accidents and injuries.
Ensure the mains power socket when using a charger is easily accessible and not left plugged in when not in use.

Charging Instructions

Use only the included charger to charge the battery pack to avoid damage and fire risks.
Do not leave the battery pack unattended while charging. Monitor the charging process constantly.
Avoid charging the battery inside the R/C vehicle or a full-size vehicle. Use a fireproof LiPo bag for charging and storage.

Charging Process

Connect the charging socket to the supplied battery pack’s power plug, ensuring correct orientation.
The charger will automatically start charging the battery pack and stop when it reaches full charge.

Component Guide

Transmitter: Steering Wheel, Trigger, Steering Trim, Steering Reverse Switch, Power Indicator, Power Switch,Steering Dual Rate (D/R), Speed Switch, Throttle Reverse Switch

ESC/Receiver: Servo Plug Socket, Plug for LED Lights, Motor Plug Socket, Antenna, Power Indicator

Thank you
Thank you for selecting this Blackzon RC product! HAVE FUN! But please read this first !!
We know you will have great fun with your model, but to get the best from your purchase please read this information BEFORE you operate the model.

Safety precautions

This product is an authentic radio controlled vehicle (RC vehicle) and it is not a toy. Read and understand this instruction manual thoroughly before running the model. If you are not familiar with RC vehicles, we recommend that you ask someone familiar with RC vehicles for advice.

Never connect the rechargeable drive battery in the reverse polarity or disassemble the battery. If the drive battery is used in the wrong way, high current can be generated and it is very dangerous.
Never run RC models near people or animals, or on public streets or highways. This could cause serious accidents, personal injuries, and/or property damage.

Make sure the mains power socket when using a charger is readily accessible and never left plugged in when not in use.
If you are using Rechargeable AA’s for the Transmitter please make sure you also purchase a suitable charger for this battery type.

Equipment Needed

3x AA Batteries for Transmitter

Components

Decal Application

Transmitter Information

Steering Wheel
Trigger
Steering Trim
Steering Reverse Switch
Power Indicator
Power Switch
Steering Dual Rate (D/R)
Speed Switch
Throttle Reverse Switch
Bind Button
(This button is disabled for this car)

ESC/Receiver

Servo Plug Socket
Plug for LED Lights
Motor Plug Socket
Antenna
Power Indicator

Open the battery holding tray to expose the empty battery slots.
Insert 3 AA batteries into the marked spaces.
Please note the correct direction of the batteries
Incorrect battery insertion could damage the transmitter.
The Power Indicator lights indicate the current status of the transmitter batteries. When both power indicator lights are illuminated, the batteries have sufficient capacity to power the transmitter safely. If the green power indicator light begins to flash, the batteries are loosing power and should be replaced.

Charging the Battery

CAUTION
Failure to follow the instructions below could result in damage to the product,personal injury, damage to property, and possibly fire.

ONLY USE THE INCLUDED CHARGER TO CHARGE THE BATTERY PACK.
Failure to use a proper charger may result in damage to the batery and possible fire.
LiPo batteries should always be charged in an open area away from flammable materials to reduce the chance of fire and property damage.

DO NOT LEAVE THE BATTERY PACK UNATTENDED WHILST CHARGING.
When charging the battery you should remain in constant observation to monitor the charging process and react to potential problems that could occur.

THE BATTERY SHOULD NEVER BE CHARGED INSIDE THE R/C VEHICLE OR INSIDE A FULL-SIZE VEHICLE.
It is recommended to charge and store the battery in a fireproof LiPo bag to reduce the risk of short circuit and property damage due to fire.

DO NOT USE DAMAGED OR LEAKING BATTERIES.
LiPo batteries should always be handled with care to prevent them from being punctured, dented, scraped or otherwise damaged.
If the battery begins to balloon or swell at any time, quickly and safely disconnect the battery and place it in a safe area away from flammable materials and observe it for at least 15 minutes.
Continuing to charge or discharge a battery that has begun to balloon or swell could result in a fire.
A battery that has ballooned or swollen should be discarded in a safe manner according to your local disposal regulations.

STORE THE BATTERY AT ROOM TEMPERATURE AND APPROXIMATELY 1/2 CHARGE.
Avoid storing the battery in environments that can reach high temperatures, like an automobile in direct sunlight. Storing the battery at minimum or maximum voltage will decrease the usable lifespan of the battery and may lead to cell damage, deterioration and swelling.

Do not allow the battery to come in contact with water or liquids. Submersing the battery could cause dangerous short-circuits and damage the battery.

Never place LiPo batteries in your pocket or any other area where they could come into contact with objects that could cause shorting,puncturing or other forms of damage.

Charging the Battery

The USB Charger requires a USB Adaptor with an output of at least 2A (Not included)

Connect the charging socket to the supplied battery packs power plug. The connectors are sided and have a clip to secure it in place. Do not force together and always check you have the connection the right way round.
The charger will automatically start to charge your battery pack. The USB charger will stop charging when it detects the battery pack is at full charge.

Error: Voltage out of charging range. If this is reoccurring your battery pack may be damaged and need replacing.

Getting Started

Turn on Switch

Turn on transmitter first and then turn on receiver.
Turn on the transmitter switch and the LED battery indicator will light up.
Turn on the receiver. Press and hold for 2-3 seconds to switch on.
The Red LED will show if the installed AA batteries have sufficient charge.
The Red LED will flash if the batteries need replacing.

Transmitter Operation

Reverse operation: Forward → Brake Twice → Reverse

Steering Trim Setup

Turn steering trim to set tires in completely centered position.

Speed Switch

The speed switch is a throttle limiter. Turning the switch all the way down reduces the top speed to 40% of maximum speed. Turning the switch up increases the speed up to 100%.

Steering Reverse Switch

If the vehicle turns right when you steer left and turns left when you steer right, flip the “Steering Reverse” switch.

Throttle Reverse Switch

If the vehicle goes backwards when you pull the trigger, flip this switch.

Steering Dual Rate

The dual rate settings adjust the maximum degree of movement from the servo. Move the D/R lever down to increase or up to decrease the maximum steering angle.

Turning R/C Unit Off

Turn off receiver first, then turn off transmitter.
If you switch off the transmitter first before the R/C car, you may lose control of the R/C car.

Press and hold for 2-3 sec. to switch off

Disconnect the battery when you are not running the vehicle.
The vehicle may run out of control or the battery can overheat and cause a fire.

Headlight Installation

The headlights are included in the box and not installed on the car.
Take out the headlight, the zip ties, and the adhesive tape from the box.
Apply the adhesive tape to the headlight board and stick it on the upper deck as shown in Photo 1.
Gently insert the headlights into the slots on the back of the front bumper. Make sure they are securely in place.
Insert the headlight plug into the slot on the ESC/Receiver. (See Photo 2)
Arrange the wires and bind them up with the aid of the zip ties.

Maintenance after driving

Proper maintenance is very important. After running, clean the chassis and check all moving parts for damage. If any parts are broken or damaged, repair or replace them before the next run. Regular maintenance is necessary to prevent damage to the car and maintain its performance.
Completely remove all dirt and debris from the vehicle, especially in the suspension, drive shafts and steering parts. Inspect each part and screws for loosening, missing parts or damages.

Trouble Shooting

The vehicle does not work at all:

Check to ensure that radio controller and car are switched on.
Check if there are damaged parts/wires/connectors, repair or replace if necessary.
Car battery is flat. Charge the battery pack.

The vehicle runs slowly:

Car battery is flat. Charge the battery pack.
The throttle limiter is turned in too much (see page 7 of the instructions).
Check if the vehicle is properly geared and no dirty or stripped gears are found. Check the gear mesh for the motor pinion and spur gear.
Check if the moving parts have any problems and clean them immediately.

The throttle works but not the steering:

Check if the servo feels jammed, and try centering it gently if it does.
Check if the servo link is loose or if the servo is defective. Repair or replace if possible.

The vehicle steers, but there is no throttle control:

Check if there are damaged parts in the overall drive train.
Check the battery power both for radio controller and the car.

The vehicle dives noisily:

Check gear mesh between spur gear and motor pinion.
Check if there are stripped and/or dirty gears.
Check for any damage to any part throughout the drivetrain.

The vehicle does not steer the same amount in both directions.

Please adjust the steering trim until the steering center point is fixed.

Batteries cannot be charged:

Check if either the charger or the battery is damaged, or batteries are over-discharged.

Parts List

540030	Steering Pivot Balls (8P)	540150	Battery Binding Strap
540043	USB charger	540152	Set Screws M3x3mm (12pcs)
540044	Ball Bearings (ø7.93×12.7×3.95mm)	540153	Pan Head Self Tapping

Exploded View

Wheelie Bar Installation

FAQ

Q: Can I use any USB adaptor for charging the battery pack?
A: No, it is recommended to use a USB adaptor with an output of at least 2A to ensure proper charging.

Q: Is it safe to leave the battery pack unattended while charging?
A: No, it is advised to monitor the charging process constantly and react to any potential problems that may arise.

Q: Where should I charge and store the battery to reduce fire risks?
A: It is recommended to charge and store the battery in a fireproof LiPo bag away from flammable materials.

Guarantee

90 Day Component Guarantee
This product is covered by a 90 day component guarantee from date of purchase. If any part of the product fails as a result of faulty manufacture during this period then we will repair or replace that part at our discretion.
We do not operate a new for old guarantee once the product has been used.
Please note this product is not a toy and it is recommended that children 14 and under are supervised by an adult. It is the responsibility of the parent or guardian to ensure minors are given appropriate guidance and supervision.
If you suspect there is a problem with the product, for whatever reason, it is the user’s responsibility to investigate and take steps to rectify the problem before further damage occurs.

Not Covered By Guarantee
This is a sophisticated, high performance model and should be treated with care and respect. Every effort has been made to make this product as strong and durable as possible, however due to the nature of this product, it is still possible to break or damage parts through crashing or extreme use. Components damaged as a result of crash damage, improper use, lack of maintenance or abuse are not covered by the guarantee.

How to Claim Against your Guarantee
For guarantee claims please first contact your supplying retailer. Do not return the product to your distributor without their prior approval. You may not need to return the product in full, only the damaged component along with a copy of your purchase receipt.
In many cases it is faster and more cost effective for the user to fit the replacement part(s) to the product & therefore we reserve the right to supply parts only in these instances.
Any returned component that is inspected by your distributor and found to have an invalid guarantee claim may be subject to an inspection and handling fee before it can be returned. Any repairs required as a result of neglect or misuse will be charged before any work is carried out on the product. If you decide not to have any work carried out the distributor reserves the right to charge a handling and a shipping fee.
Please attach your proof of purchase in the manual as you may need it again in the future.

Legal Information

Do not dispose of electrical components in household waste. Please use local waste disposal centre.
The radio equipment type in this product transmits within the frequency range 2.4 to 2.485 GHz with a maximum power of 20dBm and is in compliance with EU Directive 2014/53/EU. The full text of the Declaration of Conformity is available at http://ce.blackzon.com/

FCC Compliance:
This device transmits within the range 2.4 to 2.485 GHz and has been tested to comply with the limits for a Part 15 Class B device of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Any change or modification to the device not expressly approved by the manufacturer may void the user’s authority to operate the equipment. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Canada Compliance Statement:
This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with the FCC/IC radiation exposure limits set forth for FCC and Industry Canada portable transmitting devices operation in an uncontrolled environment. The equipment should only be used or installed at locations where there is normally at least a 20cm separation between the antenna and all persons. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

HPI RACING A/S
Jegindoevej 21
8800 Viborg, Denmark
WWW.BLACKZON.COM