Lenovo ERAZER X15Pro Wireless Earbud Instruction Manual

: August 16, 2024
: Lenovo

Lenovo ERAZER X15Pro Wireless Earbud

INSTRUCTION MANUAL

Specification of Product

Model of Product: X15PRO
Version: V5.4
Effective Distance: Approx. 10m
Speaker Diameter: (014.2mm
Impedance: 160
Frequency Respinse: 20Hz-20KHz
Microphone Sensitivity: -42dB±3dB
Earphone Input: 5V=-40mA
Charging Case Input: 5V=300mA
Charging Case Output: 511=80mA
Earphone Battery Capacity: 40mAh
Charging Case Battery Capacity: 300mAh
Duration: Approx. 4.5 H (Earphone)
Earphone Charging Time: Approx. 1 H
Charging Time of the Charging Case: Approx. 1 H

Item list

Headphones *1
Instruction *1 1-1-13 I) — 1 I II
Charging case *1
Lanyard *1
Charging cable *1

Welcome to ERAZER Open Wearable Stereo

Take out and pair it

When using for the first time, take out the left and right earphones at the same time. When the white light and ice blue light of the earphones flash alternately, the earphones will enter the automatic pairing mode.

How to wear headphones correctly

Product Description

Touch Operation

Connect with Bluetooth device

Open the Bluetooth settings option of the Bluetooth device to be paired, enter the options and find the Bluetooth pairing name of the headset “ERAZER X15PRO”.Click the pairing name to pair.

Indicator Light Description

When the headset is turned on:the white light and the ice blue light flash alternately
When the headset is turned off: the white light flashes 3 times quickly and then goes out
Pairing status: white light and ice blue light flash alternately
Connection successful: no light
Headphone Charging: The Charging case indicator light is always white, and the headset white light is always on. After the headset is fully charged, the white light turns to ice blue and then goes out, and the Charging case indicator light goes out at the same time.
Charging of the Charging case: The ice blue light of the Charging case indicator flashes.After the Charging case is fully charged, the indicator light of the Charging case is always on.

Power On

Auto power on: The Earphone are taken out of the charging case, the Earphone will be powered on, with the prompt sound of “Du”. Manual power-on: Long press for 3 seconds, the Earphone will be powered on, with the prompt sound of “Du”.

Power Off

Auto power off: Put the Earphone in the charging case, the Earphone will be powered off, with the prompt sound of “Du”. Manual power off: Long press for 5 seconds, the Earphone will be powered off, with the prompt sound of “Du”.

Note: After powering on, if it is not paired with a Bluetooth device for 3 minutes, it will automatically shut down; If it is not connected to a Bluetooth device after 3 minutes, it will automatically power off after 3 minutes, with the prompt sound of “Du”.

ONCE PRESS

DOUBLE PRESS

LONG PRESS

Wake up voice assistant

When using both ears, press and hold the left ear multi-function button for 2 seconds to activate the voice assistant. When using one earphone, press and hold the left (or right) earphone for 2 seconds to activate the voice assistant

Phone mode

Press and hold the left (or right) ear multi-function button for two seconds: call rejection

TRIPLE PRESS

Switch between game mode and music mode (Mono/Binaural operation)

Note 1: When using one earphone, you cannot switch between game mode and music mode. Note 2: The factory setting defaults to music mode

Clear Bluetooth pairing history

When both ears cannot be paired, you need to clear all connected devices and click the left and right earphones 5 times at the same time.

Wireless pairing mode

1. When there is no pairing record for the left and right earphones, the left and right earphones will automatically pair after they are turned on. After successful pairing, there will be two beeps.

2. When the left and right earphones have pairing records, they will automatically connect back when they are turned on, and the prompt will sound “beep”

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Frequently Asked Questions (FAQ)

Q: What does the FCC compliance mean for the device?

A: The FCC compliance ensures that the device meets the regulatory standards set by the Federal Communications Commission, indicating it operates within acceptable limits.

Q: Can the device be used in portable conditions?

A: Yes, the device is designed to be used in portable exposure conditions without any restrictions, as it meets the necessary RF exposure requirements.