ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture Owner’s Manual

: August 20, 2024
: ASD

Table of Contents

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture
PRODUCT SPECIFICATIONS:
PACKAGE CONTENTS:
ACCESSORIES
MOTION SENSOR INFORMATION
WITH DUSK/DAWN FUNCTION:
BUILT-IN PHOTOCELL INFORMATION
INSTALLATION GUIDE
FLOODLIGHT MOUNTING BRACKET
MOTION SENSOR INSTALLATION
ORDERING INFORMATION
ACCESSORIES:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LED AREA LIGHT
WITH Q-BASE

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture

▶ DESIGN – LED AREA LIGHT WITH Q-BASE AND PHOTOCELL is extremely efficient with a 170lm/W output. With 10kV surge protection, it is designed to operate on 120-277V or 277-480V circuits with a 0-10V dimmable driver. The built-in motion sensor base allows you to install the microwave or Infrared motion sensor. Integrated photocell switches the fixture on at night time. It can be easaily deactivated by putting the cap on.
▶ COLOR AND POWER SELECTABLE – You can choose either a 3,000K warm white, 4,000K cool white or 5,000K daylight color temperature, and change the power with a simple switch.
▶ 3G vibration rated, withstands conditions with repeated vibration, making it conform to standards for roadway.
▶ INSTALLATION – This fixture is Wet Locations rated and can be pole, post, or wall mounted using the slip fitter bracket, arm bracket, floodlight bracket, or full trunnion bracket. It comes with a 3.9ft cord. Perfect commercial or industrial solution for roadway lighting, highway lighting, sport lighting, parks, parking lots, backyards, and many other applications.
▶ ADVANTAGES – With calculated lifespan up to 163,000 hours, these fixtures are made to last decades under normal operation! ASD provides a 5-year limited warranty along with UL and DLC Premium certifications to guarantee top quality products and safety!
Catalog number …………………………………..
Notes …………………………………………………
Type …………………………………………………. ASD-LSB5A-PRO-150WH LED Parking Lot Light
Fixture

PRODUCT SPECIFICATIONS:

Construction & Materials

temperature

| -4℉ to 122℉ (-20℃ to 50℃)
L-70 Life| R > 54,000 hrs; C > 163,000 hrs
Optical system
Luminous flux| ASD-LSB5A-PRO-150WH|

24,391/25,823/24,914 lm

6 A

80 A (0.35 S)

75 A (0.42 S)

300/400/500W

ASD-LSB5A-PRO-150SL| ASD-LSB5A-PRO-240SL| ASD-LSB5A-PRO-500SL
ASD-LSB5A-PRO-150BR| ASD-LSB5A-PRO-240BR| ASD-LSB5A-PRO-500BR
ASD-LSB5A-PRO-150BK| ASD-LSB5A-PRO-240BK| ASD-LSB5A-PRO-500BK
ASD-LSB5A-PRO-200WH| 100/150/200W| ASD-LSB5A-PRO-300WH| 200/240/300W| ASD- LSB5A-HV-PRO-150BR| 100/120/150W
ASD-LSB5A-PRO-200SL| ASD-LSB5A-PRO-300SL| ASD-LSB5A-HV-PRO-200BR| 100/150/200W
ASD-LSB5A-PRO-200BR| ASD-LSB5A-PRO-300BR| ASD-LSB5A-HV-PRO-240BR| 150/200/240W
ASD-LSB5A-PRO-200BK| ASD-LSB5A-PRO-300BK| ASD-LSB5A-HV-PRO-300BR| 200/240/300W
| ASD-LSB5A-HV-PRO-500BR| 300/400/500W
Power factor| > 0.9
Output voltage| 180-260 V
Electrical system

Max output current| ASD-LSB5A-PRO-150WH| 0.5-0.75 A| ASD-LSB5A-PRO-240WH| 0.75-1.1 A| ASD-LSB5A-PRO-500SL| 1.5-2.2 A
Max output current| ASD-LSB5A-PRO-150SL| ASD-LSB5A-PRO-240SL| ASD-LSB5A-PRO- 500BR
ASD-LSB5A-PRO-150BR| ASD-LSB5A-PRO-240BR| ASD-LSB5A-PRO-500BK
ASD-LSB5A-PRO-150BK| ASD-LSB5A-PRO-240BK| ASD-LSB5A-PRO-500WH
ASD-LSB5A-PRO-200WH| 0.65-0.9 A| ASD-LSB5A-PRO-300WH| 1.1-1.5 A| ASD-LSB5A-HV- PRO-150BR| 0.58-0.7 A
ASD-LSB5A-PRO-200SL| ASD-LSB5A-PRO-300SL| ASD-LSB5A-HV-PRO-200BR| 0.75-0.95 A
ASD-LSB5A-PRO-200BR| ASD-LSB5A-PRO-300BR| ASD-LSB5A-HV-PRO-240BR| 0.75-1.1 A
ASD-LSB5A-PRO-200BK| ASD-LSB5A-PRO-300BK| ASD-LSB5A-HV-PRO-300BR| 1-1.45 A
| ASD-LSB5A-HV-PRO-500BR| 1.5-2.2 A
Surge protection
DM/CM| 6 kV / 6 kV
for 500W models: 10 kV / 10 kV
Effective projected area (EPA) ratings
Fixture q-ty| | | | | |
Single| Double 180°| Double 90°| Triple 90°| Triple 120°| Quad 90°
EPA of 100/150/200W| 0.28| 0.52| 0.52| 0.8| 0.74| 0.8
EPA of 240/300W| 0.33| 0.61| 0.69| 0.85| 0.83| 0.85
EPA of 500W| 0.48| 0.94| 0.92| 1.27| 1.22| 1.42
Dimming compatible controls

Brand| Eaton
Models| SF10P| DF10P
Regular and voluntary certifications
5-year limited warranty
DesignLights Consortium (DLC) listed (Classification: Premium) Main: Outdoor luminaires; General application: High/Very high output (Very high output for models from 240W and higher); Primary use: Outdoor pole/arm-mounted area and roadway luminaires
UL certified E473804

PACKAGE CONTENTS:

Description	Q-ty
LED Area Light with Q-Base	1
Box	1

ACCESSORIES

(sold separately): ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture -
ACCESSORIES

ACCESSORY COMPATIBILITY LIST: ASD-LSB5A-PRO-150WH LED Parking Lot Light
Fixture - Table 1

MOTION SENSOR INFORMATION

REMOTE CONTROL
HD05R sold separately:

Button| |

Remarks

---|---|---
| ON/OFF| Turn the sensor ON/OFF.
| MW/IR| Select microwave or infared sensor.
| Scene| Shows current settings saved in remote.
| Start| Press this to begin scene setup.
| Memory| Saves the scene settings.
| Apply| Applies current scene settings to the fixture.
| Detection range| Also known as “sensitivity”, 100 % means the highest sensitivity and longest distance. Use this button and the + – buttons to adjust.
| Stand-by dimming| After hold time, the light will dim from 100 % to optional standby
dimming levels. Use this button and the + – buttons to adjust.
| UP| The main functional buttons to adjust the factors to desired level.
Press + – button to dim light directly in non-detection mode.
| DOWN
| Hold time| The period that light will stay illuminated 100 % after no motion is detected. Use this button and the + – buttons
to adjust.
| Stand-by period| The period after holdtime, during which the light keeps standby dimming level. Use this button and the + – buttons to adjust.
| Daylight sensor| The preset lux level at which motion will be detected. Use this button and the + – buttons to adjust.
| Test mode| Press this button to test the sensor; it will temporarily change the hold time to 2s. This setting cannot be saved.
| Power| The dimming output in detection mode. Use this button and the + – buttons to adjust.

When any programming is set, icon will blink for 5s and fixture will dim and then resume at 100 % meaning the program has been saved.

Installation precautions:

Microwave sensor can be installed in any lamp except one with a full metal shell.
The detected surface cannot be shielded by metal objects.
Make sure the microwave module is completely exposed.
The detection surface of the sensor module should be installed facing the detection area.

Application environment:

Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or tree movement.
Shall not be installed in a place with all metal walls or small spaces (such as galvanized-iron roof ).
Shall be mounted securely, to avoid any false triggers caused by movement of the fixture itself.
Shall not be installed next to large operating machines such as a ventilator or ceiling fan, to avoid false triggers caused by machine vibration.

User notes:

Microwaves can penetrate walls or glass thinner than 0.8″ but will be impaired if thicker than 0.8″.
The driver voltage shall be stable and float within 10 %.
Detection area will be affected by speed of motion, mounting height and movement volume.
Conduct testing with adequate ambient lighting for best results.

ASD-09MW-WH:

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture -
mounted

Highest mounting height is 49.2 ft (15 m)
This figure indicates the maximum distance at the highest mounting height with 100 % sensitivity.
Possibly detected area
Well detected area

ASD-09IR-WH:

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - mounted
1 Mounting Height < 39.37 ft (12 m) ceiling mounting
Detection distance radius 9.84-22.96 ft (3-7 m)

Specifications	Model: ASD-09MW-WH	Model: ASD-09IR-WH
Operating voltage	10-15 V
Operating current	< 30 mA	< 15 mA
Working mode	0-10 V
Detection area	25 %/50 %/75 %/100 %
Hold time	Remote control: 5 s/30 s/1 min/3 min/5 min/10 min/20 min/30 min

Built-in switch: 5 s/1 min/5 min/10 min
Daylight threshold| 2 lux (0.2 fc)/10 lux (0.9 fc)/30 lux (2.8 fc)/50 lux (4.7 fc)/80 lux (7.4 fc)/120 lux (11.2 fc)/200 lux (18.6 fc)/250 lux (23.2 fc)/

300 lux (27.9 fc)/350 lux (32.5 fc)/400 lux (37.2 fc)/disable

DEFAULT SETTING:

Specifications

RF interference may affect the operation of this sensor.

WITH DUSK/DAWN FUNCTION:

With insufficient ambient brightness, sensor turns on light and keeps it at standby dimming level even if there is no motion or presence.
When sensor detects motion or presence it will bring the light level up to 100 %.
After motion is no longer detected, fixture remains at 100 % for hold time.
After pre-set hold time period it will dim to standby dimming level again and always keep it.
With sufficient ambient brightness, sensor will turn OFF light automatically.

WITH DAYLIGHT DISABLED:

Sensor turns ON light when motion is detected.
Light will stay on after detecting motion for the desired hold time.
Sensor dims light to standby dimming level after hold time if there is still no motion.
Sensor turns OFF light after standby period.

WITH DAYLIGHT THRESHOLD:

With sufficient daylight, the light remains OFF even after motion is detected.
With insufficient daylight, the sensor turns light ON when motion is detected.
After there’s no motion detected, the sensor keeps light ON 100 % for holdtime.
After holdtime, sensor dims light to standby dimming level for standby period. If the standby period has been set as Os, sensor turns light OFF automatically after holdtime.
The sensor turns OFF light automatically after the standby period when there’s no motion detected.

DAYLIGHT HARVESTING:

When ambient brightness is lower than preset lux level, sensor will turn on light automatically and keep dimming according to the change of the ambient brightness. As it gets darker outside the fixtures will brighten, and as it gets brighter outside the fixtures will dim down.
When the ambient brightness exceeds the preset lux level, the light will turn OFF.

To avoid blocking the microwave emission, the microwave sensor can not be covered with metal materials, be sprayed with a coating of metal components, or have attached metal material or stickers etc. The distance between the antenna and the glass (dielectric material) should be no less than 0.4 ft when the sensor is within the glass lampshade. Otherwise, the microwave motion sensor will not penetrate the glass easily. Avoid placing the sensor inside a metal chamber, this may cause a mis-trigger. The sensor should not be placed in a small confined space. To avoid increasing the sensor detection range or abnormal operation, the sensor should be kept away from large areas of metal and glass reflectors (separation distance at least 3.3 ft). Reduce the detection area setting. To avoid affecting the microwave signal transmission, the microwave antenna should be higher than the surrounding metal surface. Any vibration or movement may trigger the sensor. Ensure the sensor is far from any constant movement. When multiple sensors are installed side-by-side in the same direction, the distance between each sensor should be at least 3.3 ft (the warehouse sensors at least 9.8 ft) to avoid mutual interference.

DAYLIGHT HARVESTING SETTING:

Adjust “daylight” value higher than 50lux.
Preset “standby period” 0S
Press MW/IR button 3 times until the MW/IR icons are both blinking on LCD screen, daylight harvesting function enabled. (With BLE version, press DH button, daylight harvesting function enabled).

BUILT-IN PHOTOCELL INFORMATION

The fixtures with a built-in photocell automatically turn off during daylight hours.

Specifications

Light level to turn ON| ≤ 80 lux (≤ 7.4 fc)
Light level to turn OFF| ≥ 150 lux (≥ 13.9 fc)
Operating temperature| -40℉ to 140℉ (-40℃ to 60℃)

INSTALLATION GUIDE

IMPORTANT SAFETY INFORMATION:
Please read all the instructions below before installation.
▶ Make sure that the supply voltage corresponds to the rated product voltage.
▶ The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes.
▶ If the product is damaged, do not use it.

WARNING
RISK OF PERSONAL INJURY – READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference.
Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product.
Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Risk of Fire: Minimum 194°F supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
ASD® assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.

ELECTRICAL SCHEMATIC DIAGRAM:
LSB5A-PRO LSB5A-PRO with motion sensor LSB5A-HV- PRO LSB5A-HV-PRO with motion sensor LSB5A-PRO (500W) ASD-
LSB5A-PRO-150WH LED Parking Lot Light Fixture - DIAGRAM
4 LSB5A-PRO with motion sensor (500W ) ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - DIAGRAM
5 LSB5A-HV-PRO (500W) ASD-LSB5A-
PRO-150WH LED Parking Lot Light Fixture - DIAGRAM 6 LSB5A-HV-PRO with motion sensor (500W) ASD-LSB5A-PRO-150WH
LED Parking Lot Light Fixture - DIAGRAM 7

FLOODLIGHT MOUNTING BRACKET

ASD-FM1-LSB5
ASD-FM2-LSB5
ASD-FM3-LSB5
sold separately:

Drill holes on the mounting surface corresponding to the holes in the arm.
Attach fixture to bracket with 2 screws.
Align bracket holes with mounting surface holes and secure with 2 screws.
Wire in accordance with the wiring schematic. Seal the connections with the back plate of the fixture. Adjust fixture angle as needed.

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - MOUNTING
BRACKET

SLIP FITTER MOUNTING BRACKET
ASD-SF-LSB5 sold separately:

Thread the wire through the slip fitter and secure it to the fixture with four screws.
Make AC connections in accordance with wiring diagram.
If necessary adjust the fixture angle with the large hex bolt on the side of the slip fitter.

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - MOUNTING BRACKET
1 The wiring is inside the pole, the side is sealed with a rubber ring and secured with screws, preventing water from getting inside the fixture.
SLIP FITTER MOUNTING BRACKET FOR 500W
ASD-SF2-LSB sold separately:

Remove the circular plate from the slip fitter (2 screws).
Thread the wire through the slip fitter into the pole. Make AC connections in accordance with wiring diagram.
If necessary adjust the fixture angle with the large hex bolt on the side of the slip fitter.

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - MOUNTING BRACKET
2 The wiring is inside the pole, the side is sealed with a rubber ring and secured with screws, preventing water from getting inside the fixture.

ADJUSTABLE ARM MOUNTING BRACKET
ASD-AMR-LSB5 sold separately:

Open up the door on the arm bracket (1 screw). Install the mounting arm onto the pole (2 bolts). Make sure the silicone gaskets form a tight seal. Choose gasket depending on the shape of the pole (round or flat).
Thread the cord from the fixture through the bracket into the pole and tighten the two M8 screws on the body of the light. Wire in accordance with wiring schematic.
Adjust the fixture angle with the large hex bolt on the side of the bracket If necessary.

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - MOUNTING BRACKET
3

ADJUSTABLE ARM MOUNTING BRACKET
FOR 500W ASD-AMR2-LSB sold separately:

Open up the door on the arm bracket (1 screw). Install the mounting arm onto the pole (2 bolts). Make sure the silicone gaskets form a tight seal. Choose gasket depending on the shape of the pole (round or flat).
Thread the cord from the fixture through the bracket into the pole and tighten the two M8 screws on the body of the light. Wire in accordance with wiring schematic.
Adjust the fixture angle with the large hex bolt on the side of the bracket If necessary.

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - MOUNTING BRACKET
4

FULL TRUNNION MOUNTING BRACKET
ASD-TR-LSB5 ASD-TR2-LSB sold separately:

Drill holes on the mounting surface matching in size to the holes on the arm. Secure the bracket on the wall with screws. Pull wires through mount, secure fixture to the bracket.
Wire the AC power into the water tight junction box as shown in the wiring schematic diagram. Adjust the screw position to get desired angle when necessary.

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture - MOUNTING BRACKET
5

LENS
ASD-L2A-LSB5 ASD-L2B-LSB5 ASD-L4A-LSB5 ASD-L4B-LSB5 ASD-L5A-LSB5 ASD-L5B- LSB5 sold separately:

Unscrew all screws from the original lens (T3-M) on the housing.
Install the rubber ring on new lens (T4/T5-M, sold separately).
Place the lens on the housing and make sure it fits the LEDs correctly.
Tighten all the screws back.

Lens

150W, 200W| 1 lens (L2A, L4A, L5A)
240W, 300W| 1 lens (L2B, L4B, L5B)
500W| –

ASD-LSB5A-PRO-150WH LED Parking Lot Light Fixture -
LENS POWER AND COLOR TEMPERATURE SETTINGS:
Open knockout cap in the front panel of the fixture and select needed power and color temperature with a simple switch. Then close the knockout cap back.

MOTION SENSOR INSTALLATION

ASD-09MW-WH ASD-09IR-WH sold separately:

Unscrew the microwave sensor base cap.
Insert and twist the sensor until it is tight on the base surface.

PHOTOCELL SETTINGS:
Integrated photocell switches the fixture on at night time. It can be easaily deactivated by putting the cap on.

ORDERING INFORMATION

Model| UPC| Pcs. per carton| Carton size| Carton weight| GTIN 14
---|---|---|---|---|---
LSB5A-PRO
ASD-LSB5A-PRO-150WH| 810128113984| 1| 16.9″ x 11.8″ x 4.3″| 8.7 lbs| –
ASD-LSB5A-PRO-150SL| 810128111843| 1| 16.9″ x 11.8″ x 4.3″| 8.7 lbs| –
ASD-LSB5A-PRO-150BR| 810128112413| 1| 16.9″ x 11.8″ x 4.3″| 8.7 lbs| –
ASD-LSB5A-PRO-150BK| 810128111850| 1| 16.9″ x 11.8″ x 4.3″| 8.7 lbs| –
ASD-LSB5A-PRO-200WH| 810128113151| 1| 16.9″ x 11.8″ x 4.3″| 8.8 lbs| –
ASD-LSB5A-PRO-200SL| 810128111874| 1| 16.9″ x 11.8″ x 4.3″| 8.8 lbs| –
ASD-LSB5A-PRO-200BR| 810128112437| 1| 16.9″ x 11.8″ x 4.3″| 8.8 lbs| –
ASD-LSB5A-PRO-200BK| 810128111867| 1| 16.9″ x 11.8″ x 4.3″| 8.8 lbs| –
ASD-LSB5A-PRO-240WH| 810128113991| 1| 20.9″ x 13.4″ x 4.3″| 11.2 lbs| –
ASD-LSB5A-PRO-240SL| 810128111881| 1| 20.9″ x 13.4″ x 4.3″| 11.2 lbs| –
ASD-LSB5A-PRO-240BR| 810128110969| 1| 20.9″ x 13.4″ x 4.3″| 11.2 lbs| –
ASD-LSB5A-PRO-240BK| 810128111898| 1| 20.9″ x 13.4″ x 4.3″| 11.2 lbs| –
ASD-LSB5A-PRO-300WH| 810128113168| 1| 20.9″ x 13.4″ x 4.3″| 11.5 lbs| –
ASD-LSB5A-PRO-300SL| 810128111904| 1| 20.9″ x 13.4″ x 4.3″| 11.5 lbs| –
ASD-LSB5A-PRO-300BR| 810128112420| 1| 20.9″ x 13.4″ x 4.3″| 11.5 lbs| –
ASD-LSB5A-PRO-300BK| 810128111911| 1| 20.9″ x 13.4″ x 4.3″| 11.5 lbs| –
ASD-LSB5A-PRO-500WH| 810128114004| 1| 28.4″ x 15″ x 4.3″| 19.8 lbs| –
ASD-LSB5A-PRO-500SL| 810128111935| 1| 28.4″ x 15″ x 4.3″| 19.8 lbs| –
ASD-LSB5A-PRO-500BR| 810128110983| 1| 28.4″ x 15″ x 4.3″| 19.8 lbs| –
ASD-LSB5A-PRO-500BK| 810128111928| 1| 28.4″ x 15″ x 4.3″| 19.8 lbs| –
LSB5A-HV-PRO
ASD-LSB5A-HV-PRO-150BR| 810128110990| 1| 16.9″ x 11.8″ x 4.3″| 8.8 lbs| –
ASD-LSB5A-HV-PRO-200BR| 810128111799| 1| 16.9″ x 11.8″ x 4.3″| 9 lbs| –
ASD-LSB5A-HV-PRO-240BR| 810128111003| 1| 20.9″ x 13.4″ x 4.3″| 11.2 lbs| –
ASD-LSB5A-HV-PRO-300BR| 810128111010| 1| 20.9″ x 13.4″ x 4.3″| 11.5 lbs| –
ASD-LSB5A-HV-PRO-500BR| 810128111027| 1| 28.4″ x 15″ x 4.3″| 19.8 lbs| –

ACCESSORIES:

Model| Description| UPC| Pcs. per carton| Carton size| Carton weight| GTIN 14
---|---|---|---|---|---|---
ASD-09MW-WH| Microwave motion sensor 3pin| 810128113700| 120| 15.8″ x 11.8″ x 9.3″| 12.1 lbs| 10810128113707
ASD-09IR-WH| Infrared motion sensor 3pin| 810128113694| 120| 15.8″ x 11.8″ x 9.3″| 12.1 lbs| 10810128113691
HD05R| Remote control for motion sensor| 810050738767| 78| 15.8″ x 11.8″ x 9.3″| 21.5 lbs| 10810050738764
ASD-L2A-LSB5| Clear lens type II-M for 150-200W| 810128114103| 50| 18.5″ x 11″ x 9.1″| 25.4 lbs| 10810128114100
ASD-L4A-LSB5| Clear lens type IV-S for 150-200W| 810128114127| 50| 18.5″ x 11″ x 9.1″| 25.4 lbs| 10810128114124
ASD-L5A-LSB5| Clear lens type V-S for 150-200W| 810128114141| 50| 18.5″ x 11″ x 9.1″| 25.4 lbs| 10810128114148
ASD-L2B-LSB5| Clear lens type II-M for 240-300W| 810128114110| 25| 12.6″ x 12.6″ x 9.8″| 19.1 lbs| 10810128114117
ASD-L4B-LSB5| Clear lens type IV-S for 240-300W| 810128114134| 25| 12.6″ x 12.6″ x 9.8″| 19.1 lbs| 10810128114131
ASD-L5B-LSB5| Clear lens type V-S for 240-300W| 810128114158| 25| 12.6″ x 12.6″ x 9.8″| 19.1 lbs| 10810128114155
ASD-AMR-LSB5-WH| Adjustable arm mounting bracket white for 150-300W| 810128113298| 20| 27.4″ x 16.5″ x 14″| 52.9 lbs| 10810128113295
ASD-AMR-LSB5-SL| Adjustable arm mounting bracket silver for 150-300W| 810128112253| 20| 27.4″ x 16.5″ x 14″| 52.9 lbs| 20810128112257
ASD-AMR-LSB5-BR| Adjustable arm mounting bracket bronze for 150-300W| 810128112246| 20| 27.4″ x 16.5″ x 14″| 52.9 lbs| 20810128112240
ASD-AMR-LSB5-BK| Adjustable arm mounting bracket black for 150-300W| 810128112239| 20| 27.4″ x 16.5″ x 14″| 52.9 lbs| 20810128112233
ASD-AMR2-LSB-WH| Adjustable arm mounting bracket white for 500W| 810128114011| 10| 21.4″ x 9.6″ x 13.4″| 30.9 lbs| 10810128114018
ASD-AMR2-LSB-SL| Adjustable arm mounting bracket silver for 500W| 810128113335| 10| 21.4″ x 9.6″ x 13.4″| 30.9 lbs| 10810128113332
ASD-AMR2-LSB-BR| Adjustable arm mounting bracket bronze for 500W| 810128113328| 10| 21.4″ x 9.6″ x 13.4″| 30.9 lbs| 10810128113325
ASD-AMR2-LSB-BK| Adjustable arm mounting bracket black for 500W| 810128113311| 10| 21.4″ x 9.6″ x 13.4″| 30.9 lbs| 10810128113318
ASD-SF-LSB5-WH| Slip fitter mounting bracket white for 150-300W| 810128113304| 20| 15.5″ x 17.7″ x 11.1″| 35.3 lbs| 10810128113301
ASD-SF-LSB5-SL| Slip fitter mounting bracket silver for 150-300W| 810128111973| 20| 15.5″ x 17.7″ x 11.1″| 35.3 lbs| 10810128111970
ASD-SF-LSB5-BR| Slip fitter mounting bracket bronze for 150-300W| 810128111041| 20| 15.5″ x 17.7″ x 11.1″| 35.3 lbs| 20810128111045
ASD-SF-LSB5-BK| Slip fitter mounting bracket black for 150-300W| 810128111966| 20| 15.5″ x 17.7″ x 11.1″| 35.3 lbs| 10810128111963
ASD-SF2-LSB-WH| Slip fitter mounting bracket white for 500W| 810128114257| 10| 18.4″ x 9.3″ x 11.8″| 35.1 lbs| 10810128114254
ASD-SF2-LSB-SL| Slip fitter mounting bracket silver for 500W| 810128114240| 10| 18.4″ x 9.3″ x 11.8″| 35.1 lbs| 10810128114247
ASD-SF2-LSB-BR| Slip fitter mounting bracket bronze for 500W| 810128114233| 10| 18.4″ x 9.3″ x 11.8″| 35.1 lbs| 10810128114230
ASD-SF2-LSB-BK| Slip fitter mounting bracket black for 500W| 810128114226| 10| 18.4″ x 9.3″ x 11.8″| 35.1 lbs| 10810128114223
ASD-FM1-LSB5-WH| Floodlight mounting bracket white for 150-200W| 810128114073| 10| 13.2″ x 15.9″ x 12.8″| 19.8 lbs| 10810128114070
ASD-FM1-LSB5-SL| Floodlight mounting bracket silver for 150-200W| 810128112024| 10| 13.2″ x 15.9″ x 12.8″| 19.8 lbs| 10810128112021
ASD-FM1-LSB5-BR| Floodlight mounting bracket bronze for 150-200W| 810128112017| 10| 13.2″ x 15.9″ x 12.8″| 19.8 lbs| 10810128112014
ASD-FM1-LSB5-BK| Floodlight mounting bracket black for 150-200W| 810128112000| 10| 13.2″ x 15.9″ x 12.8″| 19.8 lbs| 10810128112007
ASD-FM2-LSB5-WH| Floodlight mounting bracket white for 240-300W| 810128114080| 10| 14.8″ x 13.8″ x 18.9″| 26.5 lbs| 10810128114087
ASD-FM2-LSB5-SL| Floodlight mounting bracket silver for 240-300W| 810128113144| 10| 14.8″ x 13.8″ x 18.9″| 26.5 lbs| 10810128113141
ASD-FM2-LSB5-BR| Floodlight mounting bracket bronze for 240-300W| 810128113137| 10| 14.8″ x 13.8″ x 18.9″| 26.5 lbs| 10810128113134
ASD-FM2-LSB5-BK| Floodlight mounting bracket black for 240-300W| 810128113120| 10| 14.8″ x 13.8″ x 18.9″| 26.5 lbs| 10810128113127
ASD-FM3-LSB5-WH| Floodlight mounting bracket white for 500W| 810128114097| 5| 16.3″ x 19.5″ x 13.4″| 26.5 lbs| 10810128114094
ASD-FM3-LSB5-SL| Floodlight mounting bracket silver for 500W| 810128112055| 5| 16.3″ x 19.5″ x 13.4″| 26.5 lbs| 10810128112052
ASD-FM3-LSB5-BR| Floodlight mounting bracket bronze for 500W| 810128112048| 5| 16.3″ x 19.5″ x 13.4″| 26.5 lbs| 10810128112045
ASD-FM3-LSB5-BK| Floodlight mounting bracket black for 500W| 810128112031| 5| 16.3″ x 19.5″ x 13.4″| 26.5 lbs| 10810128112038
ASD-TR-LSB5-WH| Full trunnion mounting bracket white for 150-300W| 810128113434| 20| 14.8″ x 10.3″ x 12.4″| 44.1 lbs| 10810128113431
ASD-TR-LSB5-SL| Full trunnion mounting bracket silver for 150-300W| 810128111997| 20| 14.8″ x 10.3″ x 12.4″| 44.1 lbs| 10810128111994
ASD-TR-LSB5-BR| Full trunnion mounting bracket bronze for 150-300W| 810128111058| 20| 14.8″ x 10.3″ x 12.4″| 44.1 lbs| 10810128111055
ASD-TR-LSB5-BK| Full trunnion mounting bracket black for 150-300W| 810128111980| 20| 14.8″ x 10.3″ x 12.4″| 44.1 lbs| 10810128111987
ASD-TR2-LSB-WH| Full trunnion mounting bracket white for 500W| 810128114295| 10| 14.5″ x 14″ x 8.2″| 31.7 lbs| 10810128114292
ASD-TR2-LSB-SL| Full trunnion mounting bracket silver for 500W| 810128114288| 10| 14.5″ x 14″ x 8.2″| 31.7 lbs| 10810128114285
ASD-TR2-LSB-BR| Full trunnion mounting bracket bronze for 500W| 810128114271| 10| 14.5″ x 14″ x 8.2″| 31.7 lbs| 10810128114278
ASD-TR2-LSB-BK| Full trunnion mounting bracket black for 500W| 810128114264| 10| 14.5″ x 14″ x 8.2″| 31.7 lbs| 10810128114261