ASD-LFMDR-10D16CC-BZ 10 Inch LED Flush Mount Ceiling Light User Guide

: June 6, 2024
: ASD

ASD-LFMDR-10D16CC-BZ 10 Inch LED Flush Mount Ceiling Light User Guide

LED DOUBLE RING FLUSHMOUNT

DESIGN & OPTIONS –

LED DOUBLE RING FLUSHMOUNT has a modern, multipurpose design and a stylish look with efficient lighting. It provides smooth dimming capabilities ranging from 100% to 10% with modern LED dimmers. The 120° beam angle grants you smooth and even lighting. It is also CCT adjustable, letting you set it to either 3,000K, 4,000K or 5,000K with a simple switch. Models with a built-in bi-level microwave motion sensor and battery back-up are also available. Sensor can be programmed via dip switches. The built-in battery backup ensures 90 min of power. It comes with a 120V or 120-277V, in 10″, 12″, 14″, 16″ and 18″ with either a BRONZE or BRUSHED NICKEL finish.

INSTALLATION

– Installation is quick and easy: just attach the mounting bracket to the outlet box, connect the wires and fix the lamp body on the mounting Screws, wire nuts and all installation accessories are provided. Refer to install instructions for detailed steps.

APPLICATION

– The LED DOUBLE RING FLUSHMOUNT provides bright, yet smooth lighting for your family room, bedroom, hallway, corridor, or any other common area in your living space. It can be used as an additional light to an already existing ceiling light as well. This fixture is also Damp location rated.

ENERGY SAVING & EFFICIENCY

– Replacing an incandescent fixture with LED DOUBLE RING FLUSHMOUNT can save you 8 times as much on your current energy With a lifespan of 50,000 hours, these fixtures are made to last decades with normal operation! This fixture will save you a significant amount of money in its lifetime.

CERTIFICATION & WARRANTY

– Buy with confidence: ASD provides a 5-year warranty along with ETL and ENERGY STAR certifications to guarantee top quality products and safety!
Top US certifications allow participation in rebates; please check the rebate programs available in your state.

Catalog number|
---|---
Notes|
Type|

LED DOUBLE RING FLUSHMOUNT

Model| Size| Watts| Voltage| Dimmable| Lumens| CCT| Finish| Dimensions (LxWxH)| Options
---|---|---|---|---|---|---|---|---|---
ASD-LFMDR-10D16CC-NK| 10 inch| 16 W| 120 V| TRIAC| 1,150 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 10 3/8″ x 10 3/8″ x 3 1/2″| –
ASD-LFMDR-10D16CC-BZ| 10 inch| 16 W| 120 V| TRIAC| 1,150 lm| 3CCT (3,000/4,000/5,000 K)| Oil Rubbed Bronze| 10 3/8″ x 10 3/8″ x 3 1/2″| –
ASD-LFMDR-12D15CC-NK| 12 inch| 15 W| 120 V| TRIAC| 1,150 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 11 7/8″ x 11 7/8″ x 3 1/8″| –
ASD-LFMDR-12D15CC-BZ| 12 inch| 15 W| 120 V| TRIAC| 1,150 lm| 3CCT (3,000/4,000/5,000 K)| Oil Rubbed Bronze| 11 7/8″ x 11 7/8″ x 3 1/8″| –
ASD-LFMDR-12D20CC-NK| 12 inch| 20 W| 120 V| TRIAC| 1,400 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 11 7/8″ x 11 7/8″ x 3 1/8″| –
ASD-LFMDR-14D21CC-NK| 14 inch| 21 W| 120 V| TRIAC| 1,500 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 14″ x 14″ x 3 5/8″| –
ASD-LFMDR-14D21CC-BZ| 14 inch| 21 W| 120 V| TRIAC| 1,500 lm| 3CCT (3,000/4,000/5,000 K)| Oil Rubbed Bronze| 14″ x 14″ x 3 5/8″| –
ASD-LFMDR-16D24CC-NK| 16 inch| 24 W| 120 V| TRIAC| 1,700 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 15 3/4″ x 15 3/4″ x 3 3/4″| –
ASD-LFMDR-16D24CC-BZ| 16 inch| 24 W| 120 V| TRIAC| 1,700 lm| 3CCT (3,000/4,000/5,000 K)| Oil Rubbed Bronze| 15 3/4″ x 15 3/4″ x 3 3/4″| –
ASD-LFMDR-18D28CC-NK| 18 inch| 28 W| 120 V| TRIAC| 1,960 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 17 3/4″ x 17 3/4″ x 4″| –
ASD-LFMDR-18D28CC-BZ| 18 inch| 28 W| 120 V| TRIAC| 1,960 lm| 3CCT (3,000/4,000/5,000 K)| Oil Rubbed Bronze| 17 3/4″ x 17 3/4″ x 4″| –
LFMDR-MS WITH MOTION SENSOR
ASD-LFMDR-MV-12N15CC-MS-NK| 12 inch| 15 W| 120-277 V| –| 1,050 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 12″ x 12″ x 3 1/8″| Motion sensor
ASD-LFMDR-MV-14N21CC-MS-NK| 14 inch| 21 W| 120-277 V| –| 1,500 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 14″ x 14″ x 3 1/2″| Motion sensor
LFMDR-EM WITH BATTERY BACK-UP
ASD-LFMDR-MV-12D15CC-EM-NK| 12 inch| 15 W| 120-277 V| TRIAC| 1,050 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 11 7/8″ x 11 7/8″ x 4 1/4″| 6W Battery back up
ASD-LFMDR-MV-14D21CC-EM-NK| 14 inch| 21 W| 120-277 V| TRIAC| 1,470 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 13 3/4″ x 13 3/4″ x 4 3/4″| 12W Battery back up
ASD-LFMDR-MV-16D24CC-EM-NK| 16 inch| 24 W| 120-277 V| TRIAC| 1,680 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 15 3/4″ x 15 3/4″ x 4 3/4″| 12W Battery back up
ASD-LFMDR-MV-18D28CC-EM-NK| 18 inch| 28 W| 120-277 V| TRIAC| 2,000 lm| 3CCT (3,000/4,000/5,000 K)| Brushed Nickel| 17 3/4″ x 17 3/8″ x 5 1/8″| 12W Battery back up

PRODUCT SPECIFICATIONS

Construction & Materials

Lens| White Acrylic
Housing| Steel
Finish Color| Brushed Nickel, Oil Rubbed Bronze

Weight

1.7 lb (0.8 kg)

Luminous Flux

Max input current

0.25 A

Inrush current (Action time)

Power Consumption

15 W

Output voltage

| ASD-LFMDR-10D16CC-NK|

–

| ASD-LFMDR-14D21CC-NK|

–

25-37 V

Max output current

| ASD-LFMDR-10D16CC-NK|

–

| ASD-LFMDR-14D21CC-NK|

–

Models

MOTION SENSOR INFORMATION

Specifications	Model HD401S 1
Operating voltage	120-277 V
Switching capacity	Max. 200 W (Control gear) Max. 400 W (Incandescent lamp)
Standby power	< 1 W
Detection area	10% / 50% / 75% / 100%
Hold-time	5 s / 90 s / 5 min / 15 min
Daylight threshold	2Lx (0.2Fc) / 10Lx (0.9Fc) / 50Lx (4.7Fc) / Disable
Microwave frequency	5.8 GHz ± 75 MHz
Microwave power	< 0.3 mW
Interfaces	4-pole pluggable clamp terminal (L,N,N,L’) for 1.5 mm 2 cable
Mounting height	Max. 39.4 ft (11.9 m)
Detection range	Max. 52.5 x 39.4 ft (15.8 x 11.9 m)

(ceiling mounted)

| RF interference may affect the operation

of this sensor

|
Operating temperature| -4 +158°F (-20 +70°C)
IP rating| IP20
Size| 3.2 x 1.4 x 0.9 inch

BACK-UP BATTERY INFORMATION

Model| Battery Watts| Lumens in emergency mode| Battery Capacity| Emergency Mode| Charging time
---|---|---|---|---|---
ASD-LFMDR-MV-12D15CC-EM-NK| 6 W| 644 lm| 2,200 mAh| 90 > min| 8 hours
ASD-LFMDR-MV-14D21CC-EM-NK| 12 W| 826 lm| 2,200 mAh| 90 > min| 8 hours
ASD-LFMDR-MV-16D24CC-EM-NK| 12 W| 826 lm| 2,200 mAh| 90 > min| 8 hours
ASD-LFMDR-MV-18D28CC-EM-NK| 12 W| 826 lm| 2,200 mAh| 90 > min| 8 hours

BATTERY BACK-UP OPERATION

Indicator light is ON: Battery back-up fully charged and device is using circuit
Indicator light is FLICKERING: Battery back-up recharging and device is using circuit
Indicator light is OFF: Device is using battery back-up
In order to test the battery back-up press the test switch one To turn off the emergency power state press test switch one more time.

PACKAGE CONTENTS:

Description	Q-ty
LED Double Ring Flushmount	1
Wire nut (A)	3
Screw (B)	2
Box	1
Cut sheet	2

DEFAULT SETTING

| | 1| 2|
---|---|---|---|---
I| ON| ON| 100%
II| –| ON| 75%
III| ON| –| 50%
IV| –| –| 10%

Detection Area
Detection area means detection coverage. lt can be adjusted by combining
DIP swithches for specific application.

| | 3| 4|
---|---|---|---|---
I| ON| ON| 5s
II| –| ON| 90s
III| ON| –| 5min
IV| –| –| 15min

Hold Time
Hold-time is the time period the light will be ON after the last detection.

| | 5| 6|
---|---|---|---|---
I| ON| ON| Disable
II| –| ON| 50Lx (4.7Fc)
III| ON| –| 10Lx (0.9Fc)
IV| –| –| 2Lx (0.2Fc)

Daylight threshold
Daylight sensor priors to motion sensor. Set threshold for specific needs. If set on “Disable” only the motion sensor will work.

Specifications	GL-INR18650-3S1P-2200mAh-11.1V
Input Voltage	100-277 V 50/60 Hz
AC Input Current	110 mA max.
AC Input Power Rating	5.0 W max.
Output Current and Voltage	360 mA 36 Vdc
Output Power	6 W
Lumens	400 lm
Emergency Time	min 90 minutes
Warranty	5 Years
Indicator Light	Illuminated Test Switch
Battery	Li-ion battery – 11.1 V / 4000 mAh
Battery Charging Current	440 mA
Charging Time	5 Hours
Temperature Rating (Ambient)	32°F to 113°F (0°C to +45°C)

INSTALLATION GUIDE

IMPORTANT SAFETY INFORMATION:

Please read all the instructions below before installation.

Make sure that the supply voltage corresponds to the rated product
The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes.

If the product is damaged, do not use it.

ELECTRICAL SCHEMATIC DIAGRAM:

LFMDR

LFMDR-MS with motion sensor

LFMDR-EM with battery back-up

WARNING

RISK OF PERSONAL INJURY – READ and follow all WARNINGS and installation instructions.
Keep or give to the owner for future reference.
Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product.
Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Risk of Fire: Minimum 194°F supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
ASD® assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.

INSTALLATION STEPS:

Unscrew three cap nuts counter-clockwise, remove the metal ring and the lens.
- Attach two screws to the outlet Connect the wires: Black to Black, White to White, Ground to Ground. Carefully tuck all the wires back into the outlet box.
- In fixtures with Emergency battery connect the LED Emergency controller to the battery back-up.

3. Place the fixture pan over the outlet box and feed fixture screws through keyhole slots. Rotate the fixture pan clockwise until screws lock into the narrow end of the keyhole slots and tighten screws firmly. Choose either 3,000K, 4,000K or 5,000K with a simple switch. Secure the lens and the metal ring to the fixture pan using three cap nuts.

ORDERING INFORMATION

Model	UPC	Pcs. per Carton	Carton Size	Carton Weight	GTIN-14
ASD-LFMDR-10D16CC-NK	810050731706	4	16.3″ x 12″ x 12.2″	9.9 lb

10810050731703
ASD-LFMDR-10D16CC-BZ| 810050731713| 4| 16.3″ x 12″ x 12.2″| 9.9 lb| 10810050731710
ASD-LFMDR-12D15CC-NK| 810050735728| 4| 15.6″ x 13.2″ x 13.4″| 11.7 lb| 10810050735725
ASD-LFMDR-12D15CC-BZ| 810050736077| 4| 15.6″ x 13.2″ x 13.4″| 11.7 lb| 10810050736074
ASD-LFMDR-12D20CC-NK| 810050735735| 4| 15.6″ x 13.2″ x 13.4″| 11.7 lb| 10810050735732
ASD-LFMDR-14D21CC-NK| 810050736084| 4| 15.9″ x 15.9″ x 15.7″| 16.4 lb| 10810050736081
ASD-LFMDR-14D21CC-BZ| 810050736091| 4| 15.9″ x 15.9″ x 15.7″| 16.4 lb| 10810050736098
ASD-LFMDR-16D24CC-NK| 810050736107| 4| 17.7″ x 17.5″ x 16.5″| 19.2 lb| 10810050736104
ASD-LFMDR-16D24CC-BZ| 810050736114| 4| 17.7″ x 17.5″ x 16.5″| 19.2 lb| 10810050736111
ASD-LFMDR-18D28CC-NK| 810050735551| 4| 20.1″ x 18.3″ x 20.1″| 27.5 lb| 10810050735558
ASD-LFMDR-18D28CC-BZ| 810050735940| 4| 20.1″ x 18.3″ x 20.1″| 27.5 lb| 10810050735947
LFMDR-MS WITH MOTION SENSOR
ASD-LFMDR-MV-12N15CC-MS-NK| 810050733519| 4| 15.4″ x 13.4″ x 13.4″| 12.1 lb| 10810050733516
ASD-LFMDR-MV-14N21CC-MS-NK| 810050733526| 4| 15.9″ x 15.9″ x 15.9″| 16.9 lb| 10810050733523
LFMDR-EM WITH BATTERY BACK-UP
ASD-LFMDR-MV-12D15CC-EM-NK| 819201027989| 4| 13.6″ x 13.6″ x 22″| 19.4 lb| 10819201027986
ASD-LFMDR-MV-14D21CC-EM-NK| 819201027996| 4| 15.9″ x 15.9″ x 22″| 24.2 lb| 10819201027993
ASD-LFMDR-MV-16D24CC-EM-NK| 819201028009| 4| 23.4″ x 17.9″ x 17.9″| 31.3 lb| 10819201028006
ASD-LFMDR-MV-18D28CC-EM-NK| 819201028016| 4| 24.8″ x 20.5″ x 20.5″| 41.2 lb| 10819201028013