ASD 38925461 LED Square Downlight with Junction Box Installation Guide

June 6, 2024
ASD

LED SQUARE DOWNLIGHT with Junction box

 DESIGN & OPTIONS

LED SQUARE DOWNLIGHT WITH JUNCTION BOX
has a classic, low-profile design with a baffle trim that allows you to have a stylish look with efficient lighting. Smooth dimming capabilities ranging from 100% to 109% with modern LED dimmers allow you to control the look and feel of your space. You can choose either 3,000K, 4,000K or 5,000K color temperature. The 120° beam angle grants you smooth and even lighting.

INSTALLATION

This fixture has an integrated J-box, making installation quick and easy. It has everything you need in one set. Just cut out the template, connect the J-box wiring on the back of the recessed downlight to your light switch, and place it into your ceiling. Spring-loaded clips ensure a snug fit to the surface. This fixture is IC rated so there is no can or any other housing required. Refer to installation instructions for detailed steps.

APPLICATION

Install the fixture to the ceiling for bright light in your family room, bedroom, hallways, corridors, or any other common areas in your living space. It is also suitable for wet locations, making it perfect for kitchen and bathroom lighting as well. You could also use it as a complimentary light to an existing ceiling light.

ENERGY SAVINGS & EFFICIENCY

Replacing an incandescent bulb with the LED SQUARE DOWNLIGHT WITH JUNCTION BOX can save you up to 8 times as much on your current energy costs. With a lifespan of 50,000 hours, these fixtures are made to last decades under normal operation! This fixture will Save you a significant amount of money in its lifetime.

 CERTIFICATION & WARRANTY

Buy with confidence: ASD provides a 5-year warranty along with ETL and ENERGY STAR certifications to guarantee top-quality products and safety!  Top US certifications allow participation in rebates; please check the rebate programs available in your state

Catalog|
---|---
Notes|
Type|

PRODUCT LEGEND:

Family Size Dimmable Watts CCT Finish
ASD-LOLOBS X X XX )0( xx
LEO Square Downright with Junction box 4 = 4 inch 0= Dimmable 10=10W 30 =
3,000K WH = White
6 = 6 inch 15=15W 40 = 4,000 K
50 = 5,000 K

LED SQUARE DOWNLIGHT WITH JUNCTION BOX:

Model Size Watts Voltage Dimmble CCT Lumens Dimensions l.zWxH)ll
ASO-LDLOBS-401030-WH 4 inch 10 W 120 V TRIAC 3,000 K 6501m 5 x 5 x 3

7/8′
ASO-LOLOBS-401040-WH| 4 inch| 10 W| 120 V| TRIAC| 4,000 K| 6501m| 5’x5 x37/8*
ASO-LDLOBS-401050-VVH| 4 inch| 10 W| 120 V| TRIAC| 5,000 K| 6501m| 5x 5′ x 3 7/8′
ASO-LOLOE3S-601530-WH| 6 inch| 15 W| 120 V| TRIAC| 3,000 K| 9501m| 7 3/Wx 7 3/8′ x 3 5/8′
ASO-LDLOBS-601540-WH| 6 inch| 15 W| 120 V| TRIAC| 4.000 K| 9501m| 7 3/Wx 7 3/8′ x 3 5/8′
ASO-LDLOBS-601550-WH| 6 inch| 15 W| 120 V| TRIAC| 5.000 K| 9501m| 7 318’x 7 3/8′ x 3 5/8′

ORDERING INFORMATION:

Model UPC Pcs. Per Carton Carton Size Carton Weight GTIN 14
ASO-LDLOBS-401030-WH 810050732406 12 13.4′ x 12.8′ x 12′ 117 lb

30810050732407
ASO-LOLOBS-401040-WH| 810050732413| 12| 13.4′ x 12.8′ x 17| 12.| 30810050732414
ASD-LDLOBS-401050-WH| 810050732420| 12| 13.4′ x 12.8′ x 12′| 11.7 (b| 30810050732421
ASO-LOLOBS-601530-WH| 8101E150732437| 12| 16.7′ x 12.4′ x 15.9*| 16.| 30810050732438
ASO-LDLOBS-601540-WH| 810050732444| 12| 16.7 x 12.4′ x 15.7| 15.71b| 30810050732445
ASO-LOLOBS-601550-WH| 810050732451| 12| 16.7′ x 12.4′ x 15.9″| 15.71b| 30810050732452

PRODUCT SPECIFICATIONS:

Construction and Material

Housin| Aluminum, PC
Lens| Acrylic
Finish Color| White
Weight| ASO-LOLOBS-401030-WH| 0.6 lb (0.3 kg)
ASO-LOLOBS-401060-WH
AW-LOLOBS-401050-WH
ASO-L(1085-601530 -WH| 1 tb (0.5 kg)
ASO-LOLOBS-601560 -WH
ASO-LOLOBS-601550 -WH
Work Environment| Sulitaple for Wet Locations
Operating Temperature| 13°F to 113°F (-25°C to 45°C)
L-70 Life| > 50,000 hrs
Optical System
Luminous Flux| ASEI-LOLOBS-401030-WH| 650lm
ASO-LDLOBS-401040-WH
 ASO-LDLOBS-401050-WH
ASO-LOLOBS-601530-WH| 950 lm
ASO-LOLOBS-601540-WH
A5O-LOLOBS-601550-WH
Color Temperature| 3.000 K:4.000 K 5,000 K
CRI| >90
Control
Dimming Range 10- 100%
Dimming Compatible Controls
Brand| Lutron| Leviton
---|---|---
Models| DVCL-153P-WH| SLV-600P-WH| 6672| 6674
MALL-153M-WH| CT-603PG| 0B33K1| 6631
S-600P| S-603P| 1E1205|
DVLV-603P-IV| DV-600P| 1F4205|
CTCL-153PDH| DVW-603PGH-WH| 6633-P|

INSTALLATION GUIDE

IMPORTANT SAFETY INFORMATION:
Please read all the instructions below before installation.

  • Make sure that the supply voltage corresponds to the rated product voltage.
  • The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes.
  • If the product is damaged, do not use it.

WARNING
RISK OF PERSONAL INJURY — READ and follow all WARNINGS and
installation instructions.
Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, stalling, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum 194°F Supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD® assumes no responsibility for claims arising out of improper or careless Installation or handling of this product. For recessed installation: Access above ceiling required. Inherently protected. Vapor barrier must be suitable for 194°F

ELECTRICAL SCHEMATIC DIAGRAM:

Electrical System

Input Voltage| 120 V
Max input current| ASD-LDLOBS-4D1030-WH| 0.1 A
ASD-LDLOBS-4D1040-WH
ASD-LDLOBS-4D1050-WH
ASD-LDLOBS-601530-WH| 0.15 A
ASD-LDLOBS-6D1540-WH
ASD-LDLOBS-6D1550-WH
Inrush current (Action time)| 0.2 A ( 0.03 S)
AC input range| min 108 V max 132 V
Off State Power| 0 W
Power Consumption| ASD-LDLOBS-4D1030-WH| 10 W
ASD-LDLOBS-4D1040-WH
ASD-LDLOBS-4D1050-WH
ASD-LDLOBS-6D1530-WH| 15 W
ASD-LDLOBS-6D1540-WH
ASD-LDLOBS-6D1550-WH
Power Factor| > 0.9
Output voltage| 132 V
Max output current| ASD-LDLOBS-4131030-WH| 60 mA
ASD-LDLOBS-401040-WH
ASD-LDLOBS-4D1050-WH
ASD-LDLOBS-6D1530-WH| 90 mA
ASD-LDLOBS-6D1540-WH
ASD-LDLOBS-6D1550-WH
LED Driver Class| DOB|
Regular and Voluntary Certifications
9-year limited warranty| cETLus certified 4008281| Energy star listed

PACKAGE CONTENTS:

Description Q-ty
LED Square Downlight with Junction box 1
Wire Nut (A) 3
Template (B) 1
Box 1
Cut sheet 2
Model Fixture size Rec. Holes
4 inch 5” AV/2’x4 1/2″
6 inch 73/8″ 6 11/16’x 6 11/16″

INSTALLATION STEPS:

  1. Use template to cut an appropriately sized hole.

  2. Open the junction box. Connect the wires: Black to Black, White to White, Green to Green. Secure the connection with wire nuts. Tuck all the wires back into
    junction box and close it.

  3. Push the Spring-loaded clips upwards and insert the fixture base into the mounting hole. Release the clips and the fixture will be “pulled” into place against the ceiling. Once assembly is complete, turn the power on to ensure the fixture is operating properly.

For most up-to-date spec sheets please refer to asd-lighting.com

ASD LIGHTING CORP
E-mail: orders@asd-lighting.com
Web site: www.asd-lighting.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals