vogel s RISE A131 Laptop Support Installation Guide
- August 16, 2024
- vogel s
Table of Contents
vogel s RISE A131 Laptop Support
Mounting instructions
- Subject to printing errors and technical amendments.
Designed and engineered in the Netherlands. More information on: www.vogels.com
Product Specifications
- Model: RISE A131
- Product Type: Laptop Support
- Maximum Load: 5 kg / 11 lbs
Product Usage Instructions
Assembly
- Identify components: A, B, C
- Position A in the center
- Do not fully tighten screws while assembling
Mounting
- Place the laptop support on a stable surface
- Adjust to one of the 3 positions available
- Ensure the screws are tightened securely, especially screw C
- The minimum distance from the laptop to the support should be 50 mm
Product Care
Regularly check the tightness of the screws to maintain stability and
safety.
Frequently Asked Questions (FAQ)
Q: Can this laptop support be used for laptops heavier than 5 kg?
A: It is recommended to adhere to the maximum load capacity of 5 kg for safety
reasons.
Q: Is it necessary to use all components (A, B, C) during assembly?
A: Yes, all components are essential for proper functionality and stability
of the laptop support.
Q: How do I adjust the position of the laptop support?
A: You can choose from 3 available positions by adjusting the placement of
component A. Designed and engineered in the Netherlands. More information on:
www.vogels.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>