Vogels EFFE 1140 RC Electronic floorstand Mounting Instruction
- October 30, 2023
- Vogel's
Table of Contents
Vogels EFFE 1140 RC Electronic floorstand
Warning
- Correct installation is extremely essential and falls outside the scope of responsibility of Vogel. Read this manual carefully before installation and use.
- Maximum weight of LCD/plasma screen: EFTE 2240 RC: 30 kg / 66 lbs, EFTE 2265 RC: 70 kg / 154 lbs, EFFE 1140 RC: 45 kg / 96 lbs.
- During installation please also follow the instructions for installation and use of the apparatus to be installed/fixed (for example the LCD/plasma screen).
- Store and operate this device in a clean, dry and temperate environment (between 0 en 40 degrees Celcius)
- No obstacle should hinder the movement of this device or the attached screen; provide for the necessary clearance space around this device and the attached screen. Always ensure children are at a safe distance.
- The sound level of this device during operation does not exceed 70 dB(A)
- Do not operate this device continuously; max. The 1-minute continuous operation followed by 9 minutes rest.
Troubleshooting
- In case the device does not respond to the remote : (1) check all connections of the power supply cables, (2) check to ensure the remote control battery is in working order, (3) if the problem persists contact your dealer
- In case the auto-center function forward/reverse does not function properly : (1) lift the mounting bar (part N) together with the screen from the column (part P), (2) press auto-centering on the remote control forward/reverse, (3) wait for the motor to stop, (4) place the mounting bar back in the column, (5) rotate the screen manually until you hear a click (you should feel resistance now), (6) the auto center function should now function properly.
- In case of any other problems, please contact your dealer.
How To Operate
EC DECLARATION OF CONFORMITY
Concerning the machinery directive (Appendix IIA)
We : Vogel’s Products b.v., Hondsruglaan 93,
5628 DB Eindhoven,
The Netherlands, declares entirely under or own responsibility:
-
We are the manufacturer of the product: Flat screen Swivel Stand
Mark: Vogel’s Products b.v.
Type: EFFE 1140 RC, EFTE 2240 RC, EFTE 2265 RC
Serial no: all production numbers of these types to which this declaration refers. -
The machine has been designed and built conforming with the requirements of the machinery directive 98/37/EEC
(latest issue). -
The machine meets the requirements of the additional EC directives shown below: EMC-directive 89/336/EEC (latest issue) and Low-voltage directive 2006/95/EEC. (latest issue)
-
The machine has been designed and built in conforming with the European Standards: NEN-EN 1050: 1997 Principles of risk assessment
WEEE Disposal Instruction
Do not dispose of this device, the remote control or it’s battery with unsorted household waste. Improper disposal may be harmful to the environment and human health. Please refer to your local waste authority for information on return and collection systems in your area.
Guarantee terms and conditions
Congratulations on the purchase of this Vogel’s product! The product you now
have in your possession is made of durable materials and is based on a design,
every detail of which has been meticu-lously thought-out. That is why Vogel’s
gives you a 5-year guarantee for defects in materials or manufacturing. The
guarantee is limited to 2 years for the motorized modules, electronic boards,
and remote control (the battery is not covered by a guarantee).
- Vogel’s guarantees that if during the guarantee period of a product, faults arise due to defects in manufacturing and/or materials, it will, at its discretion, repair or if necessary replace the product, free of cost. A guarantee for normal wear and tear is hereby expressly excluded.
- If the guarantee is invoked, the product should be sent to Vogel’s together with the original purchase document (invoice, sales slip, or cash receipt). The purchase document should clearly show the name of the supplier and the date of purchase.
- Vogel’s guarantee shall lapse in the following cases:
If the product has not been installed and used in accordance with the Instructions for use;
If the product has been altered or repaired by someone other than Vogel’s; • If a fault arises due to external causes (outside the product) such as for ex- ample lightning, water nuisance, fire, scuffing, exposure to extreme temper- atures, weather conditions, solvents or acids, wrong use or negligence;
If the product is used for different equipment than is mentioned on or in the packing.
Frequently Asked Questions
What is an electronic floorstand?
An electronic floor stand, also known as an electric floor stand, is a device used to mount and adjust the height of electronic equipment. It typically consists of a sturdy base, a vertical stand, and a motorized mechanism that allows for height adjustment.
How do electronic floorstands adjust the height?
Electronic floorstands usually feature a motorized mechanism controlled by a remote or buttons on the stand itself. This mechanism allows you to raise or lower the equipment to the desired height. Some floor stands also offer additional adjustment options, such as tilt, swivel, or rotation.
Are electronic floorstands easy to install?
The installation process for electronic floorstands can vary depending on the specific model and equipment being mounted. However, most floor stands come with clear instructions and the necessary hardware for installation. It's typically a straightforward process that can be accomplished with basic tools.
Can electronic floorstands support heavy equipment?
Yes, electronic floorstands are designed to support various weights. When purchasing a floor stand, make sure to check the weight capacity specified by the manufacturer. Different models have different weight limits, so it's essential to choose a floor stand that can accommodate the weight of your equipment.
Download PDF Link:
Vogels EFFE 1140 RC Monitor Mount
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>