FRIGIDAIRE FHWW185WE2 Inverter Window Room Air Conditioner User Guide

Table of Contents

Specifications

Before starting, ensure you have read the Installation Instructions provided. When plugging in the unit, press the RESET button on the Current Device.
To turn on the unit, simply press the On/Off button. The default mode is Cool with Eco. Adjust the temperature using the – or + buttons. In Eco mode, cooling shuts off when the set temperature is reached, and the fan runs every 10 minutes for sensing room temperature.
To set the timer, press the Timer button. Enter up to 24 hours for automatic turn on or shut off. Hold the Timer button for 2 seconds to cancel the timer setting.
Press the Mode button to choose the desired mode.
Press the Fan button to increase fan speed. Auto Fan mode adjusts fan speeds automatically based on room temperature changes.
After 250 hours of use, the Dust Filter light will remind you to clean the filter. Press and hold the Fan button for 5 seconds to reset the light.
Press the Eco button to activate Eco Mode. Press again to deactivate.
To activate Child Lock, press and hold the Mode button for 3 seconds. Pressing the Eco button for 5 seconds resets the light.
If installed, the PureAirTM Filter light will indicate its status. Replace the filter after 1440 hours of use for optimal performance.

Q: How often should I clean the dust filter?
A: The dust filter should be cleaned every 250 hours of use or as needed if you notice reduced airflow.
Q: How do I reset the PureAirTM Filter light?
A: Press the Eco button for 5 seconds to reset the PureAirTM Filter light.

Get Started

Press the On/OFF button. That’s it!
The unit is programmed to start in Cool mode with Eco feature, auto fan speed, and a temperature setting of 72°F.
To change the temperature setting press the – or + button.
In Eco mode (Energy Saver mode), cooling will turn off once the set temperature is reached. Every 10 minutes fan will run so room temperature can be sensed.

Change Mode

Adjust Fan Speed

Press the Fan button to increase fan speed.
You may also select Auto Fan, which will speed up or slow down fan speeds automatically based on significant changes in room temperature.

Eco Mode (Energy Saver Mode)

Press the Eco button to activate Eco Mode, the icon on the display will illuminate.
Press again to deactivate.

Activate Child Lock

Press and hold the Mode button for 3 seconds. In the Child Lock state, the control panel will be locked. Press the Mode button for another 3 seconds to deactivate.

Set the Timer

Press the Timer button. Then enter up to 24 hours for automatic turn on or shut off.
When the unit is On, the value entered is the time that the unit will shut off. When a unit is off, the value entered is the time that the unit will turn on. Press and hold the Timer button for 2 seconds to cancel the timer setting.

Change Temperature Unit

Press and hold the – and + buttons together for 3 seconds to change the display temperature unit between °F and °C.

Clean the Dust Filter

After 250 hours of use the Dust Filter light will illuminate to remind you to clean the dust filter. Press and hold the “Fan” button 5 seconds and the light will go off.

PureAirTM Premium Allergen Filter (sold separately)

If the PureAirTM Premium Allergen Filter is installed, the PureAirTM Filter light will illuminate white. After 1440 hours of use the light will illuminate red to remind you to replace a new Filter. Press the Eco button for 5 seconds to reset the light.

Your air conditioner has a reserved space for PureAirTM Premium Allergen Filter (sold separately).
Enjoy fresher room air with the PureAirTM Filter that captures household dust, dust mite debris, pet hair, dander, smoke, and other fine particles.

Remember