VIMAI V1 Open Wearable Stereo Earbuds User Manual
- August 15, 2024
- VIMAI
Table of Contents
VIMAI V1 Open Wearable Stereo Earbuds
Specifications
- Bluetooth Version: Bluetooth 5.3
- Material: ABS+PC
- Headphones Battery Capacity: 3mAh/1295Wh
Product Overview
- The Ventioc OpenBeat 012pen Ear Headphones feature a sleek spherical design with a striking breathing lights effect.
- The product offers comfortable and stable wear, and exceptional sound quality, with a handy portable lanyard, enhancing your musical journey with both comfort and style.
Product Usage Instructions
Power On
Take the headphones out of the charging case, and the headphones will automatically power on.
Pair & Connect
- For the first connection after being taken out of the case, the left and right headphones prioritize interconnection and enter the Automatic Pairing State.
- Start the Bluetooth of your mobile phone or other devices, click ‘Vention12’ in Search for Bluetooth devices, and click ‘Pairing’ when the device is searched. You will hear a prompt tone when the connection is done.
Music Controls
- Play/Pause: Double-press the Multi-Function Button (MFB) on the left or right headphone
- Skip Back: Press the MFB (L) for 2 seconds
- Skip Forward: Press the MFB (R) for 2 seconds
- Volume Control: Press the MFB (R) for volume up, and Press the MFB (L) for volume down
Voice Assistant
In Standby State, triple press the MFB (R) for 1.5 seconds to turn the Voice Assistant on or off.
Indicator Lights of Charging Case
- Low Power: The white lights flash twice every 6 times and then go out.
- Charging: The white lights flash once every 4 seconds and then go out after the charging case is fully charged.
- Putting in the Headphone: The white lights flash 3 times every 4 seconds.
Safety Warning
- Please read all instructions and warnings before using this product. Non-standard use may damage the product or pose a safety risk.
- Do not expose the battery to sunlight, fire, or high-temperature environments. Avoid storing it in harsh environments.
- Improper use may cause damage to the product or endanger personal safety. Consumers are liable for any resulting damages from improper use.
- Non-professional personnel are strictly prohibited from disassembling this product.
- Avoid using electrical appliances or loads that exceed the output current of this product.
Introduction
- The Vention OpenBeat 012 Open Ear Headphones feature a sleek spherical design with a striking breathing lights effect.
- The product offers comfortable and stable wear, and exceptional sound quality, with a handy portable lanyard, enhancing your musical journey with both comfort and style
Specifications
- Model: V1
- Bluetooth Version. Bluetooth 5.3
- Material ABS+ PC
- Headphones’ Battery Capacity. 35mAh/0.1295Wh
- Headphones’ Input Power 5V=35mA
- Charging Case’s Battery Capacity- 400mAh/1 48Wh
- Charging Case’s Input Power: 5V=230mA
- Charging Case’s Interface. USB-C
Product Overview
Packaging List
For more interesting information and events, please follow us on social media platforms.
- For warranty service or support, please contact the Vention team.
- Website: www.ventiontech.com
- Email: vention@ventiontech.com
Instructions
Power On
Take the headphones out of the charging case, and the headphones will automatically power on.
Pair & Connect
- For the first connection, after being taken out of the charging case, the left and right headphones priority interconnect and enter the Automatic Pairing State
- Note: Pairing Mode will be automatically on after one headphone powers on.
- The headphone has a connection record and will be connected to the previous device after powering on; if fails, it will automatically enter the Pending Pairing State.
- Start the Bluetooth of your mobile phone or other devices, click “Vention 012″ in Search for Bluetooth Devices”, and click ‘Pairing” when the device is searched. You will hear a prompt tone if the connection is done
- Note: If the headphone is out of the connection range, it will enter Callback State for 3 minutes, and will automatically power off if there is no connection during that time.
- If the headphone is not connected to a device, it will automatically power off after 3 minutes
Power Off
- Automatic:
- After turning off the Bluetooth on your device, the headphones will automatically power off after 3 minutes of no connection (the device can be connected again if the Bluetooth is turned on again).
- After being disconnected from your device, the headphones will automatically power off after 3 minutes of no connection (it can be connected again within 3 minutes).
- Manual:
- Put the headphones into the charging case to power them off, Or you can long-press the MFB on the left or right headphones for 5 seconds to power them off.
Phone Calls
- Ring Tone – Syn for IOS
- Answer— Double press the MFB (L/R)
- Hang-Up – Double-press the MFB (L/R)
- Reject – Press the MFB (L/R) for 2s
Music Play
- Pause – Double-press the MFB (L/R)
- Play – Double press the MB (L/R)
- Skip Back – Press the MFB (L) for 2s
- Skip Forward – Press the MFB (R) for 2s
- Volume + — Pressthe MFB (R)
- Volume – Press the MFB (L)
Voice Assistant
In the Standby State, triple press the MFB (R) for 1.5 to turn the Voice Assistant on or off.
Indicator Lights of Charging Case
- Low Power (about 10%): The white lights flash twice for 6 times and then go out,
- Charging: The white lights flash once every 4 seconds, and then go out after the charging case is fully charged;
- Put In the Headphone: The white lights flash for 4 seconds 3 times.
Data Reset
Click on the left or right Headphone 5 times in Disconnection State to clear the device pairing record (TWS inter-pairing information will be retained).
Safety Warning
Please read all instructions and warnings before using this product. Non- standard use will damage the product or personal safety.
- The battery is included in the product. Please do not expose it to sunlight, fire, or other overheating environments; Do not store it in high temperature, strong light, or magnetic field environments; Do not place it in other harsh environments such as a fire source. If water enters, please dry it naturally before use.
- Improper use may easily cause damage to the product or endanger personal and property safety.
- Consumers shall be liable for any personal and property damage resulting from their improper use of the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Non-professional personnel are strictly prohibited from disassembling this product.
- Do not use electrical appliances or loads that exceed the output current of this product.
Declaration on Toxic or Hazardous Substances and Elements in Electronic Products
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used under the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in porlable exposure conditions without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>