VIMAI Open Wearable Stereo Instruction Manual

VIMAI Open Wearable Stereo

Specifications :

• Compliance: Part 15 of FCC Rules
• Interference Conditions: Must not cause harmful interference,
  must accept any received interference

Product Information

This device is designed to comply with Part 15 of the FCC Rules, ensuring that it operates within specified interference conditions. Users are advised that any changes or modifications not approved by the responsible party for compliance may void their authority to operate the equipment.

Product Usage Instructions

1. Compliance with FCC Rules:
   Ensure that the device is operated in accordance with Part 15 of the FCC Rules to prevent harmful interference.

2. Interference Handling:
   Should the device experience interference that affects its operation, it is designed to accept such interference and continue functioning without being adversely affected.

3. Modifications:
   Users should refrain from making any changes or modifications to the device that are not expressly approved by the responsible party for compliance. Unauthorized modifications may impact the device’s performance and could void the user’s authority to operate it.

FAQ :

• Q: What should I do if I encounter interference while using the device?
  A: If you experience interference affecting the device’s operation, ensure that the source of interference is identified and, if possible, removed. The device is designed to accept such interference, but minimizing it can help maintain optimal performance.

Product Diagram

Earphone Parameters

Packing list

Operation Instruction

Power on

1. Open the charging case, and the earphones will turn on automatically
2. Touch for 3 seconds to power on IOS and Android systems connect the earphones Turn on Bluetooth, search for Bluetooth device “V1”, The first time you need to manually connect the device, connect “V1”

Power Off

1. Put it in the charging case and turn off
2. Press and hold for 6 seconds to turn off
3. Power on for 3 minutes without connection automatically turn off

Earphone Function Illustrate

Tone/ Lighting Effect Description

Charging Case Definition Description

Charging Case Parameter Description

• Battery capacity: 400mAh Charging case product size: 83.8264.5928.35mm
• Charging port: Type-C Battery life : about 3-4 times
• Charging voltage/current: 5V / 1A Operating temperature: – 10°C~+45°C
• Charging time: about 1.5 hours Storage temperature: -20°C~+ 65°C

Restore factory settings

Put the earphone into the charging case and keep the case open, hold the left/right earphone touch area for 8 seconds. The red light will flash for 3 seconds and then factory reset

Safety Guidelines

1. Please follow the instructions in this manual, do not disassemble or modify the device for any reason, otherwise it may cause the earphones to malfunction or burn
2. Do not infiltrate the product into any liquid or water to rinse the product
3. Do not use a charger other than the rated current and voltage of the headset (5V/1A) to charge the headset, otherwise It is easy to cause damage to the earphone battery (please use the matching charging cable to charge the earphone)
4. Please use and store this product in a normal temperature environment, do not place the device in an environment where the temperature is too low or too high (below 0 or above 45°)
5. Do not block the openings of the headset, such as the charging port, indicator light and microphone, etc
6. Please avoid using headphones at excessive volume or for too long to avoid dizziness or damage to hearing
7. Do not use the device under thunderstorm weather, which may cause the device to work abnormally and the signal to be interrupted.

Warranty card

• User Name:
• User Number:
• User Address:
• Purchase Date:
• Invioce Number:
• Seller:
• After-sales  Provider:
• After-sales Number:

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluate to meal general RF exposure requirement. The device can be used in porlable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>