Hongkong Vimai Technology AP031 Wireless Microphone User Manual

June 6, 2024
Hongkong Vimai Technology

Hongkong Vimai Technology AP031 Wireless Microphone User Manual
Hongkong Vimai Technology AP031 Wireless Microphone

Introduction

Thanks for choosing our product. This product is a smart wireless microphone that provides professional grade recording output. Plug and play, no app requirement be used in different scenes such as Live streaming, Video Recording, Interviewing, Online Teaching and others.

The wireless Microphone consists of two parts, one is Microphone transmitter , the other one is 3-in-1 multi-function receiver.
(See as below picture)

  • Microphone Transmitter
    Introduction

  • 3-in-1 Multi Function Receiver
    Introduction

Id Diagram

Id Diagram

  1. Windproof sponge
  2. Indicator light of microphone
  3. Type-c charging port of microphone
  4. Microphone clip
  5. Power button of microphone
  6. Reset key of microphone
  7. Type-C receiver
  8. 3.5 mm receiver
  9. Lightning receiver
  10. Indicator light of receiver
  11. Power button of receiver
  12. Type-C charging port of receiver
  13. 3.5mrn audio transfer interface
  • The function of above 12 will be specifically explained later.

How to use lightning/Type-c Receiver

  • First: Plug the Lightning or Type-C receiver into the Lightning or Type-C port of mobile phone, the green light of receiver flashes quickly.
    How to use

  • Second: Single press the the power button of mic, it is turned on Successfully when green light is on.
    How to use

  • Last: Green light of receiver keeps always on,and then the microphone works when opening phone camera to make a video recording or opening live streaming Apps to make a Live show.
    How to use

  • Special Notes:
    The for number 12 If the mobile phone is in low battery during live streaming, the external power supply directly charges the mobile phone through the Type-C port of the receiver.
    How to use

How to use 3.5mm Receiver

  • Step 1: Plug the 3.5mm receiver into the 3.5mm port device, and the green light is always on.
    How to use 3.5mm Receiver

  • Step 2: Press the power button of mic and receiver, it is turned on successfully when green light is on.
    How to use 3.5mm Receiver

  • Step 3: Turn on the device, the microphone will work directly.

About Ui

Microphone Transmitter

Functions

|

Operations

|

Light

---|---|---
Power on| Single press the power button| Green light on
Power off| Press the power button for 3-4s / auto power off with no connection for more than l0min| Green light off
Charging| Type-C cable charging| Red light on when charging,
and light off once fully-charged
Search for pairing| /| Green light flashes slowly
Paired| /| Green light always on
Low battery alarm| Battery < 20%| Blue light flashes slowly
Reset| Press reset key for 3s| /
Stop| Single press| Blue light always on
Clear pairing| press reset key quickly twice| Green light flashes quickly

Lightning Receiver

Functions

|

Operations

|

Light/Prompt tone

Power on| Plug into the device| Green light flashes
Power off| Plug off the device| Light off
Searching for pairing| /| Green light flashes slowly
Paired| /| Green light on
Clear pairing| Triple press the power button quickly within 10s after power on| Green light flashes quickly
Monitor volume up
and down, loop control| Double press the power button|

  • One “beep” : minimum volume
  • Two ” beep” : medium volume
  • Three ” beep ” : maximum volume

Type-c Receiver

Functions

|

Operations

|

fight/Prompt tone

Power on| Plug into the device| Green light flashes
Power off| Plug off the device| Light off
Searching for pairing| /| Green light flashes slowly
Paired| /| Green light on
Clear pairing| Triple press the power button quickly within 10s after power on| Green light flashes quickly
Monitor volume up
and down, loop control| Double press the power button|

  • One “beep” : minimum volume
  • Two ” beep” : medium volume
  • Three ” beep” : maximum volume

Note: You can listen to the video or recording only after the receiver is unplugged form the device.

Packing list

  1. Microphone transmitter
  2. 3-in-1 multi-function receiver
  3. Type-C charging cable
  4. User manual
  5. Storage bag
  6. 3.5 mm single wired earphone
  • Some Android phones may have incompatibility issues due to operation system please consult your dealer for details.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful  interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Icons

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals